On Fri, Mar 13, 2020 at 10:15:41AM -0400, Al Cooper wrote: > This adds support for the XHCI, EHCI and OHCI host controllers found > in Broadcom STB SoC's. These drivers depend on getting access to the > new Broadcom STB USB PHY driver through a device-tree phandle and > will fail if the driver is not available. Hint to the future: scripts/get_maintainer.pl --git --git-min-percent=67 ... > > Al Cooper (4): > dt-bindings: Add Broadcom STB USB support > usb: xhci: xhci-plat: Add support for Broadcom STB SoC's > usb: ehci: Add new EHCI driver for Broadcom STB SoC's > usb: host: Add ability to build new Broadcom STB USB drivers > > .../bindings/usb/brcm,bcm7445-ehci.yaml | 60 ++++ > .../devicetree/bindings/usb/usb-xhci.txt | 1 + > MAINTAINERS | 9 + > drivers/usb/host/Kconfig | 20 ++ > drivers/usb/host/Makefile | 20 +- > drivers/usb/host/ehci-brcm.c | 288 ++++++++++++++++++ > drivers/usb/host/xhci-brcm.c | 16 + > drivers/usb/host/xhci-brcm.h | 16 + > drivers/usb/host/xhci-plat.c | 11 + > 9 files changed, 435 insertions(+), 6 deletions(-) > create mode 100644 Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml > create mode 100644 drivers/usb/host/ehci-brcm.c > create mode 100644 drivers/usb/host/xhci-brcm.c > create mode 100644 drivers/usb/host/xhci-brcm.h > > -- > 2.17.1 > -- With Best Regards, Andy Shevchenko
