This adds support for the XHCI, EHCI and OHCI host controllers found in Broadcom STB SoC's. These drivers depend on getting access to the new Broadcom STB USB PHY driver through a device-tree phandle and will fail if the driver is not available. Al Cooper (4): dt-bindings: Add Broadcom STB USB support usb: xhci: xhci-plat: Add support for Broadcom STB SoC's usb: ehci: Add new EHCI driver for Broadcom STB SoC's usb: host: Add ability to build new Broadcom STB USB drivers .../bindings/usb/brcm,bcm7445-ehci.yaml | 60 ++++ .../devicetree/bindings/usb/usb-xhci.txt | 1 + MAINTAINERS | 9 + drivers/usb/host/Kconfig | 20 ++ drivers/usb/host/Makefile | 20 +- drivers/usb/host/ehci-brcm.c | 288 ++++++++++++++++++ drivers/usb/host/xhci-brcm.c | 16 + drivers/usb/host/xhci-brcm.h | 16 + drivers/usb/host/xhci-plat.c | 11 + 9 files changed, 435 insertions(+), 6 deletions(-) create mode 100644 Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml create mode 100644 drivers/usb/host/ehci-brcm.c create mode 100644 drivers/usb/host/xhci-brcm.c create mode 100644 drivers/usb/host/xhci-brcm.h -- 2.17.1
