W dniu 04.09.2019 o 17:58, Nathan Stratton Treadway pisze:
On Mon, Sep 02, 2019 at 22:10:01 +0200, Julian Sikorski wrote:
thanks for the patch! It appears that we got the drives confused, the
one needing quirks is 059f:1061. Unfortunately, even after hand-editing
the patch to match (attached for confirmation), uas is still not
working. The dmesg log is unchanged:
[ 67.925435] usb 2-4: new SuperSpeed Gen 1 USB device number 2 using
xhci_hcd
[ 67.947738] usb 2-4: New USB device found, idVendor=059f,
idProduct=1061, bcdDevice= 0.01
[ 67.947739] usb 2-4: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[ 67.947740] usb 2-4: Product: Rugged USB3-FW
[ 67.947741] usb 2-4: Manufacturer: LaCie
[ 67.947742] usb 2-4: SerialNumber: 00000000157f928920fa
[ 67.978140] usbcore: registered new interface driver usb-storage
[ 68.007356] scsi host12: uas
[ 68.007520] usbcore: registered new interface driver uas
[ 68.007781] scsi 12:0:0:0: Direct-Access LaCie Rugged FW USB3
051E PQ: 0 ANSI: 6
[...]
[ 280.017821] usb 2-4: USB disconnect, device number 2
[ 280.017869] scsi host12: uas_eh_device_reset_handler FAILED err -22
[ 280.017876] sd 12:0:0:0: Device offlined - not ready after error recovery
[ 280.043423] sd 12:0:0:0: [sdb] Optimal transfer size 33553920 bytes
[ 280.204419] sd 12:0:0:0: [sdb] Read Capacity(16) failed: Result:
hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 280.204422] sd 12:0:0:0: [sdb] Sense not available.
[ 280.324417] sd 12:0:0:0: [sdb] Read Capacity(10) failed: Result:
hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 280.324420] sd 12:0:0:0: [sdb] Sense not available.
Oliver, does the presence of the "Read Capacity(16)" message here
indicate that either the quirk was not applied to the device or that
the patch didn't have the expected effect?
(Is there any way to check what quirks flags are actually in effect for
a device attached to the UAS driver? For the usb-storage driver there's
both a "Quirks match for vid..." dmesg line and the Quirks: line in the
/proc/scsi/usb-storage/* file -- but neither of those seem to exist for
the UAS driver....)
Nathan
Moreover, does this matter that the two Read Capacity errors only appear
after the device is disconnected?
Best regards,
Julian
