Hi Neil, > Hi Greg, Felipe, Minas, > > Gentle ping about these remaining patches, who is supposed to pick them ? > I set my Acked-by tag to dwc2 related patch: [PATCH 7/8] usb: dwc2: Add Amlogic G12A DWC2 Params Other out of my responsibilities. Thanks, Minas > Thanks, > Neil > > On 25/03/2019 10:39, Neil Armstrong wrote: >> This patchset adds support for USB on Amlogic G12A SoCs. >> >> This patchset is composed with : >> - bindings of the PHYs >> - bindings of the USB Control Glue >> - PHY Drivers >> - USB Control Glue driver >> >> Device Tree nodes will be added in a separate patchset. >> >> The Amlogic G12A USB Complex is composed of : >> - 2 USB Controllers : >> * DWC3 for USB2 and USB3 Host functionality >> * DWC2 for USB2 Peripheral functionality >> - 2 USB2 OTG PHYs, only a single one will be routed to either DWC2 to >> DWC3 >> - 1 USB3 PHY shared with PCIE funcionnality >> - A Glue to control PHY routing, setup and OTG detection >> >> The Glue configures the UTMI 8bit interfaces for the USB2 PHYs, >> including routing of the OTG PHY between the DWC3 and DWC2 >> controllers, and setups the on-chip OTG mode selection for this PHY. >> >> This drivers supports the on-probe setup of the OTG mode, and manually >> via the USB Role interface. The IRQ mode change detect is yet to be >> added in a future patchset, mainly due to lack of hardware to validate on. >> >> Changes since v4 at [3]: >> - remove remaining phy_put/clk_put() of patch 8 >> - handled phy_power_off/on() in suspend/resume >> - Collected review tag on patch 8 >> >> Changes since v3 at [2]: >> - Documented and replaced magic values in USB2 PHY driver >> >> Changes since v2 at [1]: >> - Collected review tags >> - Removed syscon.h in usb2 phy driver >> - Added comment on the USB3/PCIe switch >> - Renamed dwc3_meson_g12a_usb_init_mode in glue driver >> - Changed indentation in dwc3_meson_g12a_role_set >> - Switched to of_get_compatible_child in glue code >> - Added devm_add_action_or_reset() to disable clock in case of probe >> failure >> - Checks priv->vbus before enabling regulator >> - Switched phy_init/phy_power_on >> - Removed priv->phys[i] NULL checks in suspend code >> - Removed clk_disable_unprepare/clk_put in remove code >> >> Changes since v1 at [0]: >> - USB2 PHY Bindings: collected tags and updated commit log >> - USB3/PCIE PHY Bindings: collected tag and updated reset list >> - DWC2 Compatible: collected tags >> - DWC3 Glue Bindings: >> - removed clock-names and reset-names for single entries >> - removed ports graph for PHYs and replaced by phys list with phy-names >> - added dr_mode and optional vbus-supply >> - fixed example >> - USB2 PHY Driver: removed USB_SUPPORT and otg.h include >> - USB3/PCIE PHY Driver: removed USB_SUPPORT, fixed comment and unused >> reg variable >> - USB Glue Driver: >> - Moved debugfs I/F to USB_ROLE_SWITCH framework >> - Integrated USB Glue Control Registers offset >> - Removed of graph parsing to use devm_phy_optional_get() >> - Fixed PHY mode handling and OTG switching >> - Simplified PHY calls by removing the NULL test >> - Added optional vbus regulator handling >> >> [1] >> https://urldefense.proofpoint.com/v2/url?u=https-3A__lkml.kernel.org_r >> _20190212151413.24632-2D1-2Dnarmstrong-40baylibre.com&d=DwICaQ&c=DPL6_ >> X_6JkXFx7AXWqB0tg&r=cQBKt4q-qzNVC53rNAwuwplH23V61rHQhhULvdLA0U8&m=JpHS >> pNXFOjqz2mQIFEbLclNsBGFFLrjgWzl5raSOnY0&s=IgoSa-bVc4LdJUXwO5emFfIsnHAf >> M5rDvLwaAzOiZSA&e= [2] >> https://urldefense.proofpoint.com/v2/url?u=https-3A__lkml.kernel.org_r >> _20190304103846.2060-2D1-2Dnarmstrong-40baylibre.com&d=DwICaQ&c=DPL6_X >> _6JkXFx7AXWqB0tg&r=cQBKt4q-qzNVC53rNAwuwplH23V61rHQhhULvdLA0U8&m=JpHSp >> NXFOjqz2mQIFEbLclNsBGFFLrjgWzl5raSOnY0&s=xlNfpSTqe4BX8SRvs-QGbvQ69FRPm >> 6FYPn2XtP7aTtQ&e= [3] >> https://urldefense.proofpoint.com/v2/url?u=https-3A__lkml.kernel.org_r >> _20190318101153.7531-2D1-2Dnarmstrong-40baylibre.com&d=DwICaQ&c=DPL6_X >> _6JkXFx7AXWqB0tg&r=cQBKt4q-qzNVC53rNAwuwplH23V61rHQhhULvdLA0U8&m=JpHSp >> NXFOjqz2mQIFEbLclNsBGFFLrjgWzl5raSOnY0&s=cJJQpmMW7S91S_77ss6Fz2Cx03jKl >> Pm2j8rE4jIu_gw&e= [4] >> https://urldefense.proofpoint.com/v2/url?u=https-3A__lkml.kernel.org_r >> _20190318132655.30040-2D1-2Dnarmstrong-40baylibre.com&d=DwICaQ&c=DPL6_ >> X_6JkXFx7AXWqB0tg&r=cQBKt4q-qzNVC53rNAwuwplH23V61rHQhhULvdLA0U8&m=JpHS >> pNXFOjqz2mQIFEbLclNsBGFFLrjgWzl5raSOnY0&s=IMfKgW_qvqj1gtwuPAy1AqiaNB5y >> 0PVUphQdJ3UvryY&e= >> >> Neil Armstrong (8): >> dt-bindings: phy: Add Amlogic G12A USB2 PHY Bindings >> dt-bindings: phy: Add Amlogic G12A USB3+PCIE Combo PHY Bindings >> dt-bindings: usb: dwc2: Add Amlogic G12A DWC2 Compatible >> dt-bindings: usb: dwc3: Add Amlogic G12A DWC3 Glue Bindings >> phy: amlogic: add Amlogic G12A USB2 PHY Driver >> phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver >> usb: dwc2: Add Amlogic G12A DWC2 Params >> usb: dwc3: Add Amlogic G12A DWC3 glue >> >> .../bindings/phy/meson-g12a-usb2-phy.txt | 22 + >> .../bindings/phy/meson-g12a-usb3-pcie-phy.txt | 22 + >> .../devicetree/bindings/usb/amlogic,dwc3.txt | 88 +++ >> .../devicetree/bindings/usb/dwc2.txt | 1 + >> drivers/phy/amlogic/Kconfig | 22 + >> drivers/phy/amlogic/Makefile | 2 + >> drivers/phy/amlogic/phy-meson-g12a-usb2.c | 341 ++++++++++ >> .../phy/amlogic/phy-meson-g12a-usb3-pcie.c | 413 ++++++++++++ >> drivers/usb/dwc2/params.c | 12 + >> drivers/usb/dwc3/Kconfig | 10 + >> drivers/usb/dwc3/Makefile | 1 + >> drivers/usb/dwc3/dwc3-meson-g12a.c | 604 ++++++++++++++++++ >> 12 files changed, 1538 insertions(+) >> create mode 100644 >> Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt >> create mode 100644 >> Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt >> create mode 100644 drivers/phy/amlogic/phy-meson-g12a-usb2.c >> create mode 100644 drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c >> create mode 100644 drivers/usb/dwc3/dwc3-meson-g12a.c >> >
