RE: [PATCH v3 4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 
> On 04.12.18 21:01, Fabio Estevam wrote:
> > Hi Frieder,
> >
> > On Tue, Dec 4, 2018 at 12:31 PM Schrempf Frieder
> > <frieder.schrempf@xxxxxxxxxx> wrote:
> >
> >> There are many other optional properties for this driver and a lot of
> >> them are not in the given example. Maybe we should just keep the
> >> pinctrls for HSIC-mode out of the example, too?
> >
> > I am just trying to make life easier for those who want to use HSIC
> > support with chipidea.
> >
> > Can we just add a real dts snippet example of your board into the
> > binding document?
> 
> Sure, here is what I have in my dts:
> 
> &usbh2 {
> 	pinctrl-names = "idle", "active";
> 	pinctrl-0 = <&pinctrl_usbh2_idle>;
> 	pinctrl-1 = <&pinctrl_usbh2_active>;
> 	status = "okay";
> 	#address-cells = <1>;
> 	#size-cells = <0>;
> 
> 	usbnet: smsc@1 {
> 		compatible = "usb424,9730";
> 		reg = <1>;
> 	};
> };
> 
> @Peter: Can you add this as a second example to the binding documentation?
> 

So, there are two examples at binding-doc, one for normal, one for HSIC? Fabio, do you
mean that? If DT maintainer agrees it too, I will add it.

Peter




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux