Re: [PATCH v3 4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Fabio,

On 04.12.18 21:01, Fabio Estevam wrote:
> Hi Frieder,
> 
> On Tue, Dec 4, 2018 at 12:31 PM Schrempf Frieder
> <frieder.schrempf@xxxxxxxxxx> wrote:
> 
>> There are many other optional properties for this driver and a lot of
>> them are not in the given example. Maybe we should just keep the
>> pinctrls for HSIC-mode out of the example, too?
> 
> I am just trying to make life easier for those who want to use HSIC
> support with chipidea.
> 
> Can we just add a real dts snippet example of your board into the
> binding document?

Sure, here is what I have in my dts:

&usbh2 {
	pinctrl-names = "idle", "active";
	pinctrl-0 = <&pinctrl_usbh2_idle>;
	pinctrl-1 = <&pinctrl_usbh2_active>;
	status = "okay";
	#address-cells = <1>;
	#size-cells = <0>;

	usbnet: smsc@1 {
		compatible = "usb424,9730";
		reg = <1>;
	};
};

@Peter: Can you add this as a second example to the binding documentation?

Thanks,
Frieder




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux