On Fri, May 18, 2018 at 01:57:20PM +0200, Greg KH wrote: > ant wrote: ... > > i didn't think you'd care too much about a report > > from Debian stable, but i finally got that installed > > and booting. i can leave that running today while > > i'm working on other things and see what the logs > > say. > > If it works on the same hardware with a different kernel, yes, that is > interesting to know. hi, no luck, keyboard/system wasn't touched during entire time once the logs were set up to track until i came in a while ago: Script started on Fri 18 May 2018 09:40:24 AM EDT root@anto(1)~# journalctl -f -o short-monotonic | tee jrnl-log & [1] 980 root@anto(2)~# -- Logs begin at Fri 2018-05-18 09:33:45 EDT. -- ... root@anto(2)~# udevadm monitor -k -u | tee udev-log & [2] 982 root@anto(3)~# monitor will print the received events for: UDEV - the event which udev sends out after rule processing KERNEL - the kernel uevent ... root@anto(5)~# [ 910.372140] anto systemd[1]: Starting Cleanup of Temporary Directories... [ 910.383094] anto systemd[1]: Started Cleanup of Temporary Directories. [ 1696.872987] anto systemd[1]: Started Run anacron jobs. [ 1696.878216] anto anacron[1001]: Anacron 2.3 started on 2018-05-18 [ 1696.879521] anto anacron[1001]: Normal exit (0 jobs run) [ 1696.879959] anto systemd[1]: anacron.timer: Adding 4min 10.454254s random time. KERNEL[2078.484239] change /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002/input/input19/input19::numlock (leds) KERNEL[2078.484313] remove /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002/input/input19/input19::numlock (leds) KERNEL[2078.484361] change /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002/input/input19/input19::capslock (leds) KERNEL[2078.484395] remove /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002/input/input19/input19::capslock (leds) KERNEL[2078.484436] change /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002/input/input19/input19::scrolllock (leds) KERNEL[2078.484466] remove /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002/input/input19/input19::scrolllock (leds) KERNEL[2078.484487] remove /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002/input/input19/input19::compose (leds) KERNEL[2078.484514] change /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002/input/input19/input19::kana (leds) KERNEL[2078.484536] remove /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002/input/input19/input19::kana (leds) UDEV [2078.487645] change /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002/input/input19/input19::numlock (leds) UDEV [2078.489387] change /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002/input/input19/input19::capslock (leds) UDEV [2078.489824] remove /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002/input/input19/input19::numlock (leds) UDEV [2078.489839] remove /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002/input/input19/input19::compose (leds) UDEV [2078.489850] change /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002/input/input19/input19::scrolllock (leds) UDEV [2078.490032] remove /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002/input/input19/input19::capslock (leds) UDEV [2078.490170] change /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002/input/input19/input19::kana (leds) UDEV [2078.490256] remove /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002/input/input19/input19::scrolllock (leds) UDEV [2078.490561] remove /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002/input/input19/input19::kana (leds) KERNEL[2078.512355] remove /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002/input/input19/event16 (input) UDEV [2078.515258] remove /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002/input/input19/event16 (input) KERNEL[2078.544334] remove /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002/input/input19 (input) KERNEL[2078.544402] remove /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002/hidraw/hidraw1 (hidraw) KERNEL[2078.544465] remove /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002 (hid) KERNEL[2078.544537] remove /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0 (usb) KERNEL[2078.545109] remove /devices/pci0000:00/0000:00:14.0/usb1/1-6 (usb) UDEV [2078.546837] remove /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002/input/input19 (input) UDEV [2078.547436] remove /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002/hidraw/hidraw1 (hidraw) UDEV [2078.548461] remove /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0002 (hid) UDEV [2078.549328] remove /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0 (usb) UDEV [2078.550501] remove /devices/pci0000:00/0000:00:14.0/usb1/1-6 (usb) [ 2078.469025] anto kernel: usb 1-6: USB disconnect, device number 8 KERNEL[2079.922989] add /devices/pci0000:00/0000:00:14.0/usb1/1-6 (usb) KERNEL[2079.924371] add /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0 (usb) KERNEL[2079.925540] add /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003 (hid) KERNEL[2079.925806] add /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/input/input20 (input) KERNEL[2079.984222] add /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/input/input20/input20::numlock (leds) KERNEL[2079.984293] change /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/input/input20/input20::numlock (leds) KERNEL[2079.984328] add /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/input/input20/input20::capslock (leds) KERNEL[2079.984371] change /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/input/input20/input20::capslock (leds) KERNEL[2079.984405] add /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/input/input20/input20::scrolllock (leds) KERNEL[2079.984446] change /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/input/input20/input20::scrolllock (leds) KERNEL[2079.984477] add /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/input/input20/input20::compose (leds) KERNEL[2079.984508] add /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/input/input20/input20::kana (leds) KERNEL[2079.984549] change /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/input/input20/input20::kana (leds) KERNEL[2079.984599] add /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/input/input20/event16 (input) KERNEL[2079.984647] add /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/hidraw/hidraw1 (hidraw) UDEV [2079.993091] add /devices/pci0000:00/0000:00:14.0/usb1/1-6 (usb) UDEV [2079.995882] add /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0 (usb) UDEV [2079.997931] add /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003 (hid) UDEV [2079.998966] add /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/hidraw/hidraw1 (hidraw) UDEV [2079.999257] add /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/input/input20 (input) UDEV [2080.000046] add /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/input/input20/input20::capslock (leds) UDEV [2080.000091] add /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/input/input20/input20::numlock (leds) UDEV [2080.000380] add /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/input/input20/input20::scrolllock (leds) UDEV [2080.000450] add /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/input/input20/input20::compose (leds) UDEV [2080.001064] add /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/input/input20/input20::kana (leds) UDEV [2080.001081] change /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/input/input20/input20::numlock (leds) UDEV [2080.001094] change /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/input/input20/input20::capslock (leds) UDEV [2080.001186] change /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/input/input20/input20::scrolllock (leds) UDEV [2080.001691] change /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/input/input20/input20::kana (leds) UDEV [2080.078280] add /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/input/input20/event16 (input) [ 2079.796009] anto kernel: usb 1-6: new full-speed USB device number 9 using xhci_hcd [ 2079.938524] anto kernel: usb 1-6: New USB device found, idVendor=17f6, idProduct=0830 [ 2079.938534] anto kernel: usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2079.938540] anto kernel: usb 1-6: Product: Ruffian6_x Kbrd v3_16 [ 2079.938545] anto kernel: usb 1-6: Manufacturer: Unicomp Inc [ 2079.941671] anto kernel: input: Unicomp Inc Ruffian6_x Kbrd v3_16 as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17F6:0830.0003/input/input20 [ 2080.000569] anto kernel: hid-generic 0003:17F6:0830.0003: input,hidraw1: USB HID v1.11 Keyboard [Unicomp Inc Ruffian6_x Kbrd v3_16] on usb-0000:00:14.0-6/input0 [ 2079.990503] anto mtp-probe[1017]: checking bus 1, device 9: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6" [ 2079.991571] anto mtp-probe[1017]: bus: 1, device: 9 was not an MTP device [ 2598.903247] anto CRON[1032]: pam_unix(cron:session): session opened for user root by (uid=0) [ 2598.907048] anto CRON[1033]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) [ 2598.907979] anto CRON[1032]: pam_unix(cron:session): session closed for user root [ 5437.122673] anto systemd[1]: Started Run anacron jobs. [ 5437.127932] anto anacron[1059]: Anacron 2.3 started on 2018-05-18 [ 5437.129492] anto anacron[1059]: Normal exit (0 jobs run) [ 5437.129906] anto systemd[1]: anacron.timer: Adding 3min 45.755079s random time. [ 6198.921759] anto CRON[1068]: pam_unix(cron:session): session opened for user root by (uid=0) [ 6198.926766] anto CRON[1069]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) [ 6198.927164] anto CRON[1068]: pam_unix(cron:session): session closed for user root [ 9017.373588] anto systemd[1]: Started Run anacron jobs. [ 9017.378668] anto anacron[1095]: Anacron 2.3 started on 2018-05-18 [ 9017.379931] anto anacron[1095]: Normal exit (0 jobs run) [ 9017.380353] anto systemd[1]: anacron.timer: Adding 51.834531s random time. [ 9798.939744] anto CRON[1105]: pam_unix(cron:session): session opened for user root by (uid=0) [ 9798.944764] anto CRON[1106]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) [ 9798.945159] anto CRON[1105]: pam_unix(cron:session): session closed for user root root@anto(5)~# exit Script done on Fri 18 May 2018 12:50:26 PM EDT kernel version: Linux version 4.9.0-6-amd64 (debian- kernel@xxxxxxxxxxxxxxxx) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.88-1+deb9u1 (2018-05-07) ant -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
