Hi Guenter,
regmap_write returns a negative return code or 0, thus this can be
simplified to
return regmap_write(...);
Ok, I'll modify it in v4
Hmm, normally I'd expect this function _after_ the function it calls.
Guess that doesn't matter much here, so I am fine with it as long
as Greg is ok with it as well.
Do you mean it maybe better to call vendor's set_vconn after normal set_vconn is finished?
If I understand correctly, I can also modify it in v4. For RT1711H, it also works by enabling/disabling idle mode after set_vconn.
Best Regards,
*****************************************
Shu-Fan Lee
Richtek Technology Corporation
TEL: +886-3-5526789 #2359
FAX: +886-3-5526612
*****************************************
________________________________________
寄件者: Guenter Roeck <groeck7@xxxxxxxxx> 代表 Guenter Roeck <linux@xxxxxxxxxxxx>
寄件日期: 2018年2月22日 上午 06:15
收件者: ShuFanLee
副本: heikki.krogerus@xxxxxxxxxxxxxxx; greg@xxxxxxxxx; shufan_lee(李書帆); cy_huang(黃啟原); linux-kernel@xxxxxxxxxxxxxxx; linux-usb@xxxxxxxxxxxxxxx
主旨: Re: [PATCH] staging: typec: handle vendor defined part and modify drp toggling flow
On Wed, Feb 21, 2018 at 11:02:23PM +0800, ShuFanLee wrote:
> From: ShuFanLee <shufan_lee@xxxxxxxxxxx>
>
> Handle vendor defined behavior in tcpci_init, tcpci_set_vconn and export tcpci_irq.
> More operations can be extended in tcpci_data if needed.
> According to TCPCI specification, 4.4.5.2 ROLE_CONTROL,
> TCPC shall not start DRP toggling until subsequently the TCPM
> writes to the COMMAND register to start DRP toggling.
> DRP toggling flow is chagned as following:
> - Write DRP = 0 & Rd/Rd
> - Write DRP = 1
> - Set LOOK4CONNECTION command
>
> Signed-off-by: ShuFanLee <shufan_lee@xxxxxxxxxxx>
Mostly loooks good to me. Couple of nitpicks below.
Guenter
> ---
> drivers/staging/typec/tcpci.c | 128 +++++++++++++++++++++++++++++++++---------
> drivers/staging/typec/tcpci.h | 13 +++++
> 2 files changed, 115 insertions(+), 26 deletions(-)
>
> patch changelogs between v1 & v2
> - Remove unnecessary i2c_client in the structure of tcpci
> - Rename structure of tcpci_vendor_data to tcpci_data
> - Not exporting tcpci read/write wrappers but register i2c regmap in glue driver
> - Add set_vconn ops in tcpci_data
> (It is necessary for RT1711H to enable/disable idle mode before disabling/enabling vconn)
> - Export tcpci_irq so that vendor can call it in their own IRQ handler
>
> patch changelogs between v2 & v3
> - Change the return type of tcpci_irq from int to irqreturn_t
>
> diff --git a/drivers/staging/typec/tcpci.c b/drivers/staging/typec/tcpci.c
> index 9bd4412..4959c69 100644
> --- a/drivers/staging/typec/tcpci.c
> +++ b/drivers/staging/typec/tcpci.c
> @@ -21,7 +21,6 @@
>
> struct tcpci {
> struct device *dev;
> - struct i2c_client *client;
>
> struct tcpm_port *port;
>
> @@ -30,6 +29,12 @@ struct tcpci {
> bool controls_vbus;
>
> struct tcpc_dev tcpc;
> + struct tcpci_data *data;
> +};
> +
> +struct tcpci_chip {
> + struct tcpci *tcpci;
> + struct tcpci_data data;
> };
>
> static inline struct tcpci *tcpc_to_tcpci(struct tcpc_dev *tcpc)
> @@ -37,8 +42,7 @@ static inline struct tcpci *tcpc_to_tcpci(struct tcpc_dev *tcpc)
> return container_of(tcpc, struct tcpci, tcpc);
> }
>
> -static int tcpci_read16(struct tcpci *tcpci, unsigned int reg,
> - u16 *val)
> +static int tcpci_read16(struct tcpci *tcpci, unsigned int reg, u16 *val)
> {
> return regmap_raw_read(tcpci->regmap, reg, val, sizeof(u16));
> }
> @@ -98,8 +102,10 @@ static int tcpci_set_cc(struct tcpc_dev *tcpc, enum typec_cc_status cc)
> static int tcpci_start_drp_toggling(struct tcpc_dev *tcpc,
> enum typec_cc_status cc)
> {
> + int ret;
> struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
> - unsigned int reg = TCPC_ROLE_CTRL_DRP;
> + unsigned int reg = (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT) |
> + (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT);
>
> switch (cc) {
> default:
> @@ -117,7 +123,19 @@ static int tcpci_start_drp_toggling(struct tcpc_dev *tcpc,
> break;
> }
>
> - return regmap_write(tcpci->regmap, TCPC_ROLE_CTRL, reg);
> + ret = regmap_write(tcpci->regmap, TCPC_ROLE_CTRL, reg);
> + if (ret < 0)
> + return ret;
> + usleep_range(500, 1000);
> + reg |= TCPC_ROLE_CTRL_DRP;
> + ret = regmap_write(tcpci->regmap, TCPC_ROLE_CTRL, reg);
> + if (ret < 0)
> + return ret;
> + ret = regmap_write(tcpci->regmap, TCPC_COMMAND,
> + TCPC_CMD_LOOK4CONNECTION);
> + if (ret < 0)
> + return ret;
> + return 0;
regmap_write returns a negative return code or 0, thus this can be
simplified to
return regmap_write(...);
> }
>
> static enum typec_cc_status tcpci_to_typec_cc(unsigned int cc, bool sink)
> @@ -178,6 +196,16 @@ static int tcpci_set_vconn(struct tcpc_dev *tcpc, bool enable)
> struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
> int ret;
>
> + /* Handle vendor set vconn */
> + if (tcpci->data) {
> + if (tcpci->data->set_vconn) {
> + ret = tcpci->data->set_vconn(tcpci, tcpci->data,
> + enable);
> + if (ret < 0)
> + return ret;
> + }
> + }
> +
> ret = regmap_write(tcpci->regmap, TCPC_POWER_CTRL,
> enable ? TCPC_POWER_CTRL_VCONN_ENABLE : 0);
> if (ret < 0)
> @@ -323,6 +351,15 @@ static int tcpci_init(struct tcpc_dev *tcpc)
> if (time_after(jiffies, timeout))
> return -ETIMEDOUT;
>
> + /* Handle vendor init */
> + if (tcpci->data) {
> + if (tcpci->data->init) {
> + ret = tcpci->data->init(tcpci, tcpci->data);
> + if (ret < 0)
> + return ret;
> + }
> + }
> +
> /* Clear all events */
> ret = tcpci_write16(tcpci, TCPC_ALERT, 0xffff);
> if (ret < 0)
> @@ -344,9 +381,15 @@ static int tcpci_init(struct tcpc_dev *tcpc)
> return tcpci_write16(tcpci, TCPC_ALERT_MASK, reg);
> }
>
> -static irqreturn_t tcpci_irq(int irq, void *dev_id)
> +static irqreturn_t _tcpci_irq(int irq, void *dev_id)
> {
> struct tcpci *tcpci = dev_id;
> +
> + return tcpci_irq(tcpci);
> +}
Hmm, normally I'd expect this function _after_ the function it calls.
Guess that doesn't matter much here, so I am fine with it as long
as Greg is ok with it as well.
> +
> +irqreturn_t tcpci_irq(struct tcpci *tcpci)
> +{
> u16 status;
>
> tcpci_read16(tcpci, TCPC_ALERT, &status);
> @@ -412,6 +455,7 @@ static irqreturn_t tcpci_irq(int irq, void *dev_id)
>
> return IRQ_HANDLED;
> }
> +EXPORT_SYMBOL_GPL(tcpci_irq);
>
> static const struct regmap_config tcpci_regmap_config = {
> .reg_bits = 8,
> @@ -435,22 +479,18 @@ static int tcpci_parse_config(struct tcpci *tcpci)
> return 0;
> }
>
> -static int tcpci_probe(struct i2c_client *client,
> - const struct i2c_device_id *i2c_id)
> +struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data)
> {
> struct tcpci *tcpci;
> int err;
>
> - tcpci = devm_kzalloc(&client->dev, sizeof(*tcpci), GFP_KERNEL);
> + tcpci = devm_kzalloc(dev, sizeof(*tcpci), GFP_KERNEL);
> if (!tcpci)
> - return -ENOMEM;
> + return ERR_PTR(-ENOMEM);
>
> - tcpci->client = client;
> - tcpci->dev = &client->dev;
> - i2c_set_clientdata(client, tcpci);
> - tcpci->regmap = devm_regmap_init_i2c(client, &tcpci_regmap_config);
> - if (IS_ERR(tcpci->regmap))
> - return PTR_ERR(tcpci->regmap);
> + tcpci->dev = dev;
> + tcpci->data = data;
> + tcpci->regmap = data->regmap;
>
> tcpci->tcpc.init = tcpci_init;
> tcpci->tcpc.get_vbus = tcpci_get_vbus;
> @@ -467,27 +507,63 @@ static int tcpci_probe(struct i2c_client *client,
>
> err = tcpci_parse_config(tcpci);
> if (err < 0)
> - return err;
> + return ERR_PTR(err);
> +
> + tcpci->port = tcpm_register_port(tcpci->dev, &tcpci->tcpc);
> + if (PTR_ERR_OR_ZERO(tcpci->port))
> + return ERR_CAST(tcpci->port);
>
> - /* Disable chip interrupts */
> - tcpci_write16(tcpci, TCPC_ALERT_MASK, 0);
> + return tcpci;
> +}
> +EXPORT_SYMBOL_GPL(tcpci_register_port);
> +
> +void tcpci_unregister_port(struct tcpci *tcpci)
> +{
> + tcpm_unregister_port(tcpci->port);
> +}
> +EXPORT_SYMBOL_GPL(tcpci_unregister_port);
>
> - err = devm_request_threaded_irq(tcpci->dev, client->irq, NULL,
> - tcpci_irq,
> +static int tcpci_probe(struct i2c_client *client,
> + const struct i2c_device_id *i2c_id)
> +{
> + struct tcpci_chip *chip;
> + int err;
> + u16 val = 0;
> +
> + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
> + if (!chip)
> + return -ENOMEM;
> +
> + chip->data.regmap = devm_regmap_init_i2c(client, &tcpci_regmap_config);
> + if (IS_ERR(chip->data.regmap))
> + return PTR_ERR(chip->data.regmap);
> +
> + /* Disable chip interrupts before requesting irq */
> + err = regmap_raw_write(chip->data.regmap, TCPC_ALERT_MASK, &val,
> + sizeof(u16));
> + if (err < 0)
> + return err;
> +
> + err = devm_request_threaded_irq(&client->dev, client->irq, NULL,
> + _tcpci_irq,
> IRQF_ONESHOT | IRQF_TRIGGER_LOW,
> - dev_name(tcpci->dev), tcpci);
> + dev_name(&client->dev), chip);
> if (err < 0)
> return err;
>
> - tcpci->port = tcpm_register_port(tcpci->dev, &tcpci->tcpc);
> - return PTR_ERR_OR_ZERO(tcpci->port);
> + chip->tcpci = tcpci_register_port(&client->dev, &chip->data);
> + if (PTR_ERR_OR_ZERO(chip->tcpci))
> + return PTR_ERR(chip->tcpci);
> +
> + i2c_set_clientdata(client, chip);
> + return 0;
> }
>
> static int tcpci_remove(struct i2c_client *client)
> {
> - struct tcpci *tcpci = i2c_get_clientdata(client);
> + struct tcpci_chip *chip = i2c_get_clientdata(client);
>
> - tcpm_unregister_port(tcpci->port);
> + tcpci_unregister_port(chip->tcpci);
>
> return 0;
> }
> diff --git a/drivers/staging/typec/tcpci.h b/drivers/staging/typec/tcpci.h
> index fdfb06c..40025b2 100644
> --- a/drivers/staging/typec/tcpci.h
> +++ b/drivers/staging/typec/tcpci.h
> @@ -59,6 +59,7 @@
> #define TCPC_POWER_CTRL_VCONN_ENABLE BIT(0)
>
> #define TCPC_CC_STATUS 0x1d
> +#define TCPC_CC_STATUS_DRPRST BIT(5)
> #define TCPC_CC_STATUS_TERM BIT(4)
> #define TCPC_CC_STATUS_CC2_SHIFT 2
> #define TCPC_CC_STATUS_CC2_MASK 0x3
> @@ -121,4 +122,16 @@
> #define TCPC_VBUS_VOLTAGE_ALARM_HI_CFG 0x76
> #define TCPC_VBUS_VOLTAGE_ALARM_LO_CFG 0x78
>
> +struct tcpci;
> +struct tcpci_data {
> + struct regmap *regmap;
> + int (*init)(struct tcpci *tcpci, struct tcpci_data *data);
> + int (*set_vconn)(struct tcpci *tcpci, struct tcpci_data *data,
> + bool enable);
> +};
> +
> +struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data);
> +void tcpci_unregister_port(struct tcpci *tcpci);
> +irqreturn_t tcpci_irq(struct tcpci *tcpci);
> +
> #endif /* __LINUX_USB_TCPCI_H */
> --
> 1.9.1
>
************* Email Confidentiality Notice ********************
The information contained in this e-mail message (including any attachments) may be confidential, proprietary, privileged, or otherwise exempt from disclosure under applicable laws. It is intended to be conveyed only to the designated recipient(s). Any use, dissemination, distribution, printing, retaining or copying of this e-mail (including its attachments) by unintended recipient(s) is strictly prohibited and may be unlawful. If you are not an intended recipient of this e-mail, or believe that you have received this e-mail in error, please notify the sender immediately (by replying to this e-mail), delete any and all copies of this e-mail (including any attachments) from your system, and do not disclose the content of this e-mail to any other person. Thank you!
?頨{.n?????%??橆??w?{.n???{殺???緡w* jg炳????▏?拷G??９ ８夸:+v??鋟喓???茶 庫全??ㄑ搬?????
