Re: Fibocom L831-EAU and cdc_mbim

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Andreas Böhler <news@xxxxxxxxxxx> writes:

> On 18/09/17 22:18, Bjørn Mork wrote:
>> Andreas Böhler <news@xxxxxxxxxxx> writes:
>>>
>>> I can also provide you with Wireshark USB traces, if that helps?
>> 
>> It might help. We are obviously interacting badly with the firmware.
>> Seeing where and how it stops would be useful.
>
> Attached are two Wireshark traces, I hope that I captured everything
> relevant:
>
> 1. wwan_init_connect_failed.pcapng.gz
> 2. wwan_reset_init_connect_success.pcapng.gz
>
> I disabled everything Modem-related (i.e. ModemManager), I blacklisted
> the cdc* modules then I restarted the machine. The first trace was taken
> directly after boot. I loaded the modules and I tried to enable
> ModemManager and to connect to the Internet - it failed.
>
> The second trace was taken after disabling ModemManager and sending
> "AT+CFUN=15" to the device, thus resetting it. I then enabled
> ModemManager and connected to the Internet - which succeeded.


Thanks a lot.  These are very useful.  The thing is that I really cannot
see anything going wrong there.   The "failed" capture just ends with a
sequence of successful MBIM indications being read from the firmware.

So whatever goes wrong looks like something entirely local to the
driver.  I'll try to poke around some more.



Bjørn
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux