[antonia] ~ > lsusb -t
Bus# 7
`-Dev# 1 Vendor 0x1d6b Product 0x0001
Bus# 6
`-Dev# 1 Vendor 0x1d6b Product 0x0001
Bus# 5
`-Dev# 1 Vendor 0x1d6b Product 0x0001
`-Dev# 2 Vendor 0x08ff Product 0x2580
Bus# 4
`-Dev# 1 Vendor 0x1d6b Product 0x0001
Bus# 3
`-Dev# 1 Vendor 0x1d6b Product 0x0001
`-Dev# 2 Vendor 0x03f0 Product 0x171d
Bus# 2
`-Dev# 1 Vendor 0x1d6b Product 0x0002
Bus# 1
`-Dev# 1 Vendor 0x1d6b Product 0x0002
`-Dev# 3 Vendor 0x04b4 Product 0x6560
|-Dev# 4 Vendor 0x057b Product 0x0000
|-Dev# 5 Vendor 0x058f Product 0x6362
`-Dev# 6 Vendor 0x03f0 Product 0x2424
or similarly;
[antonia] ~ > ./unix/htdocs/usbtree
/: Bus 07.Port 1: Dev 1, Class=root_hub, Drv=uhci_hcd/2p, 12M
/: Bus 06.Port 1: Dev 1, Class=root_hub, Drv=uhci_hcd/2p, 12M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Drv=uhci_hcd/2p, 12M
|_ Port 2: Dev 2, If 0, Prod=Fingerprint Sensor, Class=vend., Drv=none, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Drv=uhci_hcd/2p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Drv=uhci_hcd/2p, 12M
|_ Port 1: Dev 2, If 0, Prod=HP Integrated Module, Class=unk., Drv=btusb, 12M
|_ Port 1: Dev 2, If 1, Prod=, Class=unk., Drv=btusb, 12M
|_ Port 1: Dev 2, If 2, Prod=, Class=vend., Drv=none, 12M
|_ Port 1: Dev 2, If 3, Prod=, Class=app., Drv=none, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Drv=ehci_hcd/6p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Drv=ehci_hcd/4p, 480M
|_ Port 2: Dev 3, If 0, Prod=, Class=hub, Drv=hub/4p, 480M
|_ Port 1: Dev 4, If 0, Prod=USB Floppy Drive, Class=stor., Drv=usb-storage, 12M
|_ Port 2: Dev 5, If 0, Prod=Mass Storage Device, Class=stor., Drv=usb-storage, 480M
|_ Port 4: Dev 6, If 0, Prod=, Class=hub, Drv=hub/4p, 480M
On Wed, 25 Feb 2009, Oliver Neukum wrote:
Am Mittwoch 25 Februar 2009 13:31:31 schrieb Stephen J. Gowdy:
Okay, after setting that and upgrading to 2.6.28.7 these two devices;
1 Bus 001 Device 006: ID 03f0:2424 Hewlett-Packard LP1965 19"
Monitor Hub
2 Bus 005 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501
Fingerprint Sensor
show;
-----
Enabling auto-suspend. Waiting for device activity to cease...
Device still active, test inconclusive.
Number #2 is odd. Can you post "lsusb -t"?
Regards
Oliver
--
/------------------------------------+-------------------------\
|Stephen J. Gowdy | CERN Office: 8-1-11|
|http://cern.ch/gowdy/ | CH-1211 Geneva 23 |
| | Switzerland |
|EMail: gowdy@xxxxxxx | Tel: +41 76 487 2215 |
\------------------------------------+-------------------------/
