On 11/8/2016 2:48 AM, Felipe Balbi wrote: > > Hi, > > John Youn <John.Youn@xxxxxxxxxxxx> writes: >>> John Youn <John.Youn@xxxxxxxxxxxx> writes: >>>>>> @@ -1812,17 +1812,17 @@ static u32 dwc2_hsotg_ep0_mps(unsigned int mps) >>>>>> * @hsotg: The driver state. >>>>>> * @ep: The index number of the endpoint >>>>>> * @mps: The maximum packet size in bytes >>>>>> + * @mc: The multicount value >>>>>> * >>>>>> * Configure the maximum packet size for the given endpoint, updating >>>>>> * the hardware control registers to reflect this. >>>>>> */ >>>>>> static void dwc2_hsotg_set_ep_maxpacket(struct dwc2_hsotg *hsotg, >>>>>> - unsigned int ep, unsigned int mps, unsigned int dir_in) >>>>>> + unsigned int ep, unsigned int mps, >>>>>> + unsigned int mc, unsigned int dir_in) >>>>> >>>>> this has an odd set of arguments. You pass the ep index, mps, direction >>>>> and mult value, when you could just pass hsotg_ep and descriptor instead. >>>> >>>> Yes looks like we can do some simplification here. And you probably >>>> don't need to pass a descriptor either since it must be set in the >>>> usb_ep before enable. >>>> >>>> However this is also called in some contexts where a descriptor is not >>>> available (initialization and ep0). So we have to think about this a >>>> bit. >>>> >>>> I think dwc3 can make similar simplification on the >>>> __dwc3_gadget_ep_enable(). >>> >>> __dwc3_gadget_ep_enable() takes the actual descriptors as arguments: >>> >>> static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, >>> const struct usb_endpoint_descriptor *desc, >>> const struct usb_ss_ep_comp_descriptor *comp_desc, >>> bool modify, bool restore) >>> >>> I fail to see how much simpler we can make this. Perhaps we can turn >>> bool and restore into a single argument if we use a bitfield instead of >>> a bool. >>> >> >> Hi Felipe, >> >> I mean that there shouldn't be any need to pass in descriptors with >> usb_ep since the ones in usb_ep should be set properly from ep enable >> to ep disable. >> >> I think that's the case anyways. > > __dwc3_gadget_ep_enable() is the one assigning the descriptor to the ep: > > static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, > const struct usb_endpoint_descriptor *desc, > const struct usb_ss_ep_comp_descriptor *comp_desc, > bool modify, bool restore) > { > struct dwc3 *dwc = dep->dwc; > u32 reg; > int ret; > > if (!(dep->flags & DWC3_EP_ENABLED)) { > ret = dwc3_gadget_start_config(dwc, dep); > if (ret) > return ret; > } > > ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc, modify, > restore); > if (ret) > return ret; > > if (!(dep->flags & DWC3_EP_ENABLED)) { > struct dwc3_trb *trb_st_hw; > struct dwc3_trb *trb_link; > > dep->endpoint.desc = desc; > dep->comp_desc = comp_desc; > > [...] > Right, but that's redundant for non-ep0 case. And the EP0 case can be handled globally elsewhere. The usb_ep_enable() API function takes only the usb_ep and requires that the descriptors are set in the usb_ep beforehand. So 'desc' argument in the callback function is probably not required either. I think this is correct to make it consistent. Since we don't pass the SS comp descriptor, and we don't want to keep passing more descriptors every time a new standard descriptor is added, such as the SSP ISO EP comp descriptor for 3.1. See below for a proposed change to see what I mean (not tested). Regards, John ---->8---- diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 2322863..b9903c6 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -539,7 +539,6 @@ struct dwc3_ep { struct dwc3_trb *trb_pool; dma_addr_t trb_pool_dma; - const struct usb_ss_ep_comp_descriptor *comp_desc; struct dwc3 *dwc; u32 saved_state; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index e47cba5..0fc55e89 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -576,13 +576,12 @@ static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep) * Caller should take care of locking */ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, - const struct usb_endpoint_descriptor *desc, - const struct usb_ss_ep_comp_descriptor *comp_desc, bool modify, bool restore) { struct dwc3 *dwc = dep->dwc; u32 reg; int ret; + struct usb_ep *ep; if (!(dep->flags & DWC3_EP_ENABLED)) { ret = dwc3_gadget_start_config(dwc, dep); @@ -590,8 +589,9 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, return ret; } - ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc, modify, - restore); + ep = &dep->endpoint; + ret = dwc3_gadget_set_ep_config(dwc, dep, ep->desc, ep->comp_desc, + modify, restore); if (ret) return ret; @@ -599,9 +599,7 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, struct dwc3_trb *trb_st_hw; struct dwc3_trb *trb_link; - dep->endpoint.desc = desc; - dep->comp_desc = comp_desc; - dep->type = usb_endpoint_type(desc); + dep->type = usb_endpoint_type(ep->desc); dep->flags |= DWC3_EP_ENABLED; dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING; @@ -611,7 +609,7 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, init_waitqueue_head(&dep->wait_end_transfer); - if (usb_endpoint_xfer_control(desc)) + if (usb_endpoint_xfer_control(ep->desc)) goto out; /* Initialize the TRB ring */ @@ -634,7 +632,7 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, * Issue StartTransfer here with no-op TRB so we can always rely on No * Response Update Transfer command. */ - if (usb_endpoint_xfer_bulk(desc)) { + if (usb_endpoint_xfer_bulk(ep->desc)) { struct dwc3_gadget_ep_cmd_params params; struct dwc3_trb *trb; dma_addr_t trb_dma; @@ -714,7 +712,6 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep) dep->stream_capable = false; dep->endpoint.desc = NULL; - dep->comp_desc = NULL; dep->type = 0; dep->flags &= DWC3_EP_END_TRANSFER_PENDING; @@ -763,7 +760,7 @@ static int dwc3_gadget_ep_enable(struct usb_ep *ep, return 0; spin_lock_irqsave(&dwc->lock, flags); - ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc, false, false); + ret = __dwc3_gadget_ep_enable(dep, false, false); spin_unlock_irqrestore(&dwc->lock, flags); return ret; @@ -1735,7 +1732,8 @@ static int __dwc3_gadget_start(struct dwc3 *dwc) dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); dep = dwc->eps[0]; - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false, + dep->endpoint.desc = &dwc3_gadget_ep0_desc; + ret = __dwc3_gadget_ep_enable(dep, false, false); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); @@ -1743,7 +1741,8 @@ static int __dwc3_gadget_start(struct dwc3 *dwc) } dep = dwc->eps[1]; - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false, + dep->endpoint.desc = &dwc3_gadget_ep0_desc; + ret = __dwc3_gadget_ep_enable(dep, false, false); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); @@ -2573,7 +2572,8 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) } dep = dwc->eps[0]; - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true, + dep->endpoint.desc = &dwc3_gadget_ep0_desc; + ret = __dwc3_gadget_ep_enable(dep, true, false); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); @@ -2581,7 +2581,8 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) } dep = dwc->eps[1]; - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true, + dep->endpoint.desc = &dwc3_gadget_ep0_desc; + ret = __dwc3_gadget_ep_enable(dep, true, false); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html