Hi Peter,
> Stefan Wahren <stefan.wahren@xxxxxxxx> hat am 25. August 2016 um 19:17
> geschrieben:
>
>
> Hi,
>
> > Peter Chen <hzpeterchen@xxxxxxxxx> hat am 25. August 2016 um 11:16
> > geschrieben:
> >
> >
> > On Thu, Aug 25, 2016 at 08:27:03AM +0200, Stefan Wahren wrote:
> > > Am 25.08.2016 um 08:44 schrieb Peter Chen:
> > > > On Thu, Aug 25, 2016 at 07:06:12AM +0200, Stefan Wahren wrote:
> > > >> Hi Alan,
> > > >>
> > > >> i tried the following patch:
> > > >> --- a/drivers/usb/chipidea/host.c
> > > >> +++ b/drivers/usb/chipidea/host.c
> > > >> @@ -185,6 +185,8 @@ static void host_stop(struct ci_hdrc *ci)
> > > >>
> > > >> if (hcd) {
> > > >> usb_remove_hcd(hcd);
> > > >> + ci_role_stop(ci);
> > > >> + synchronize_irq(ci->irq);
> > > > Would you please just add below line to see if this problem can be
> > > > fixed?
> > > > + ci->role = CI_ROLE_END;
> > > >
> > > > When ci->role is CI_ROLE_END, neither host nor device interrupt handler
> > > > will run.
> > >
> > > I would add this before synchronize_irq() as Alan suggested.
>
> i replaced my ci_role_stop(ci) with ci->role = CI_ROLE_END and the panic
> disappear:
>
> [ 114.980000] ci_hdrc ci_hdrc.0: remove, state 1
> [ 114.990000] usb usb1: USB disconnect, device number 1
> [ 115.000000] usb 1-1: USB disconnect, device number 2
> [ 115.000000] usb 1-1.1: USB disconnect, device number 3
> [ 115.030000] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx'
> usb-ci_hdrc.0-1.1,
> smsc95xx USB 2.0 Ethernet
> [ 115.220000] ci_hdrc ci_hdrc.0: USB bus 1 deregistered
> [ 115.230000] otgsc:0x4e20, usbsts:0x0
> [ 115.240000] reboot: System halted
do you need more information?
What would be the next step?
Stefan
>
> Regards
> Stefan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
