Dear David,
I have added my host device as you suggested:
/* WISAIR WSR601 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x13Cf, 0x1200, 0xe0, 0x01, 0x02),
.driver_info = WUSB_QUIRK_WHCI_CMD_EVT },
and now beacons from other hosts are parsed correctly!!!
Now assuming that I have a WUSB Device dongle that I want to connect a
mass storage class disk to it, and work in native mode, can this be
done?
If the answer is yes, how do I do the paring between the host dongle and
the device dongle, so my host machine will be able to see and mount the
mount this DOK?
Thanks for all your help.
Best Regards,
Eyal Reizer
On Tue, 2009-01-27 at 21:09 +0200, David Vrabel wrote:
> Eyal Reizer wrote:
> > Hello,
> >
> > I have an ubuntu machine running kernel version 2.6.28.2
>
> UWB and Wireless USB support is sufficiently experimental still that I
> would advise that you use the latest git tree.
>
> > When I connect a cables unlimitted wireless USB module it enumarates
> > correctly (see the last message displayed):
>
> I'm not familiar with this device. Is it part of a HWA/DWA (Wireless
> USB hub) pair? If so, be aware that DWAs are not yet supported.
>
> > Jan 27 17:54:34 eyalr-desktop kernel: [117552.743180] uwb_rc uwb0:
> new
> > uwb radio controller (mac 02:00:00:00:2b:1f dev f7:5d) on usb
> 5-3:1.1
> >
> > I now activate the scan using the following command:
> >
> > echo 13 0 > /sys/class/uwb_rc/uwb0/scan
> >
> > and I get the following error messages:
> >
> > Jan 27 17:56:42 eyalr-desktop kernel: [117680.736070] uwb_rc uwb0:
> > Beacon Received Notification: Not enough data to decode IEs (25 vs
> 6185
> > bytes needed)
>
> It's likely that this device doesn't use the standard HWA event format
> but that specified by WHCI. Try adding your device to the table in
> drivers/uwb/hwa-rc.c with .driver_info = WUSB_QUIRK_WHCI_CMD_EVT.
>
> David
> --
> David Vrabel, Senior Software Engineer, Drivers
> CSR, Churchill House, Cambridge Business Park, Tel: +44 (0)1223
> 692562
> Cowley Road, Cambridge, CB4 0WZ http://www.csr.com/
>
>
>
>
>
> ************************************************************************************
> This footnote confirms that this email message has been scanned by
> PineApp Mail-SeCure for the presence of malicious code, vandals &
> computer viruses.
> ************************************************************************************
>
>
>
>
>
************************************************************************************
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses.
************************************************************************************
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
