On Sat, 24 Jan 2009 12:38:48 -0500 (EST) Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> wrote: > You're getting your log messages from /var/log/messages or some place > like that. As a result you don't see any debugging messages. You > should use dmesg instead. Here you go: [ 26.179794] usb usb1: usb resume [ 26.179802] ehci_hcd 0000:00:1a.7: resume root hub [ 26.220096] hub 1-0:1.0: hub_resume [ 26.220112] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT [ 26.220121] hub 1-0:1.0: port 1: status 0501 change 0001 [ 26.321116] hub 1-0:1.0: state 7 ports 6 chg 0002 evt 0000 [ 26.321129] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 26.372344] ehci_hcd 0000:00:1a.7: port 1 high speed [ 26.372353] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 26.423108] usb 1-1: new high speed USB device using ehci_hcd and address 4 [ 26.474345] ehci_hcd 0000:00:1a.7: port 1 high speed [ 26.474353] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 26.538536] usb 1-1: default language 0x0409 [ 26.539918] usb 1-1: New USB device found, idVendor=13fe, idProduct=1d00 [ 26.540061] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 26.540203] usb 1-1: Product: DataTraveler 2.0 [ 26.540354] usb 1-1: Manufacturer: Kingston [ 26.540508] usb 1-1: SerialNumber: 5B74199C110E [ 26.540905] usb 1-1: uevent [ 26.541556] usb 1-1: usb_probe_device [ 26.541562] usb 1-1: configuration #1 chosen from 1 choice [ 26.541908] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 26.541985] usb 1-1:1.0: uevent [ 26.542510] usb-storage 1-1:1.0: usb_probe_interface [ 26.542523] usb-storage 1-1:1.0: usb_probe_interface - got id [ 26.542527] usb-storage: USB Mass Storage device detected [ 26.542594] usb-storage: -- associate_dev [ 26.542598] usb-storage: Vendor: 0x13fe, Product: 0x1d00, Revision: 0x0110 [ 26.542603] usb-storage: Interface Subclass: 0x06, Protocol: 0x50 [ 26.542614] usb-storage: Transport: Bulk [ 26.542617] usb-storage: Protocol: Transparent SCSI [ 26.542657] scsi4 : SCSI emulation for USB Mass Storage devices [ 26.543122] usb-storage: *** thread sleeping. [ 26.557671] /home/hohndel/linux/drivers/usb/core/inode.c: creating file '004' [ 26.558458] usb-storage: device found at 4 [ 26.558463] usb-storage: waiting for device to settle before scanning [ 31.558111] usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1 [ 31.558320] usb-storage: GetMaxLUN command result is 1, data is 0 [ 31.558397] usb-storage: queuecommand called [ 31.558409] usb-storage: *** thread awakened. [ 31.558414] usb-storage: Command INQUIRY (6 bytes) [ 31.558417] usb-storage: 12 00 00 00 24 00 [ 31.558430] usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6 [ 31.558436] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.558552] usb-storage: Status code 0; transferred 31/31 [ 31.558555] usb-storage: -- transfer complete [ 31.558559] usb-storage: Bulk command transfer result=0 [ 31.558564] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36 bytes, 1 entries [ 31.558931] usb-storage: Status code 0; transferred 36/36 [ 31.558935] usb-storage: -- transfer complete [ 31.558938] usb-storage: Bulk data transfer result 0x0 [ 31.558942] usb-storage: Attempting to get CSW... [ 31.558946] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.559076] usb-storage: Status code 0; transferred 13/13 [ 31.559080] usb-storage: -- transfer complete [ 31.559084] usb-storage: Bulk status result = 0 [ 31.559090] usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0 [ 31.559095] usb-storage: scsi cmd done, result=0x0 [ 31.559102] usb-storage: *** thread sleeping. [ 31.559157] scsi 4:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 31.561499] usb-storage: queuecommand called [ 31.561511] usb-storage: *** thread awakened. [ 31.561516] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 31.561520] usb-storage: 00 00 00 00 00 00 [ 31.561531] usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6 [ 31.561536] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.561637] usb-storage: Status code 0; transferred 31/31 [ 31.561641] usb-storage: -- transfer complete [ 31.561645] usb-storage: Bulk command transfer result=0 [ 31.561648] usb-storage: Attempting to get CSW... [ 31.561652] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.561769] usb-storage: Status code 0; transferred 13/13 [ 31.561773] usb-storage: -- transfer complete [ 31.561776] usb-storage: Bulk status result = 0 [ 31.561781] usb-storage: Bulk Status S 0x53425355 T 0x2 R 0 Stat 0x1 [ 31.561785] usb-storage: -- transport indicates command failure [ 31.561789] usb-storage: Issuing auto-REQUEST_SENSE [ 31.561795] usb-storage: Bulk Command S 0x43425355 T 0x3 L 18 F 128 Trg 0 LUN 0 CL 6 [ 31.561800] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.561942] usb-storage: Status code 0; transferred 31/31 [ 31.561947] usb-storage: -- transfer complete [ 31.561950] usb-storage: Bulk command transfer result=0 [ 31.561955] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries [ 31.738330] usb-storage: Status code 0; transferred 18/18 [ 31.738336] usb-storage: -- transfer complete [ 31.738340] usb-storage: Bulk data transfer result 0x0 [ 31.738344] usb-storage: Attempting to get CSW... [ 31.738348] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.738555] usb-storage: Status code 0; transferred 13/13 [ 31.738559] usb-storage: -- transfer complete [ 31.738562] usb-storage: Bulk status result = 0 [ 31.738567] usb-storage: Bulk Status S 0x53425355 T 0x3 R 0 Stat 0x0 [ 31.738572] usb-storage: -- Result from auto-sense is 0 [ 31.738576] usb-storage: -- code: 0x70, key: 0x6, ASC: 0x28, ASCQ: 0x0 [ 31.738583] usb-storage: Unit Attention: Not ready to ready change, medium may have changed [ 31.738591] usb-storage: scsi cmd done, result=0x2 [ 31.738599] usb-storage: *** thread sleeping. [ 31.738639] usb-storage: queuecommand called [ 31.738648] usb-storage: *** thread awakened. [ 31.738652] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 31.738655] usb-storage: 00 00 00 00 00 00 [ 31.738667] usb-storage: Bulk Command S 0x43425355 T 0x4 L 0 F 0 Trg 0 LUN 0 CL 6 [ 31.738672] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.738806] usb-storage: Status code 0; transferred 31/31 [ 31.738810] usb-storage: -- transfer complete [ 31.738814] usb-storage: Bulk command transfer result=0 [ 31.738817] usb-storage: Attempting to get CSW... [ 31.738821] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.738933] usb-storage: Status code 0; transferred 13/13 [ 31.738936] usb-storage: -- transfer complete [ 31.738940] usb-storage: Bulk status result = 0 [ 31.738944] usb-storage: Bulk Status S 0x53425355 T 0x4 R 0 Stat 0x0 [ 31.738949] usb-storage: scsi cmd done, result=0x0 [ 31.738954] usb-storage: *** thread sleeping. [ 31.738984] usb-storage: queuecommand called [ 31.738992] usb-storage: *** thread awakened. [ 31.738996] usb-storage: Command READ_CAPACITY (10 bytes) [ 31.738999] usb-storage: 25 00 00 00 00 00 00 00 00 00 [ 31.739014] usb-storage: Bulk Command S 0x43425355 T 0x5 L 8 F 128 Trg 0 LUN 0 CL 10 [ 31.739019] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.739182] usb-storage: Status code 0; transferred 31/31 [ 31.739185] usb-storage: -- transfer complete [ 31.739189] usb-storage: Bulk command transfer result=0 [ 31.739193] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes, 1 entries [ 31.739336] usb-storage: Status code 0; transferred 8/8 [ 31.739340] usb-storage: -- transfer complete [ 31.739345] usb-storage: Bulk data transfer result 0x0 [ 31.739350] usb-storage: Attempting to get CSW... [ 31.739354] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.739550] usb-storage: Status code 0; transferred 13/13 [ 31.739555] usb-storage: -- transfer complete [ 31.739560] usb-storage: Bulk status result = 0 [ 31.739565] usb-storage: Bulk Status S 0x53425355 T 0x5 R 0 Stat 0x0 [ 31.739570] usb-storage: scsi cmd done, result=0x0 [ 31.739576] usb-storage: *** thread sleeping. [ 31.739603] sd 4:0:0:0: [sdb] 2015232 512-byte hardware sectors: (1.03 GB/984 MiB) [ 31.739858] usb-storage: queuecommand called [ 31.739867] usb-storage: *** thread awakened. [ 31.739872] usb-storage: Command MODE_SENSE (6 bytes) [ 31.739875] usb-storage: 1a 00 3f 00 c0 00 [ 31.739886] usb-storage: Bulk Command S 0x43425355 T 0x6 L 192 F 128 Trg 0 LUN 0 CL 6 [ 31.739891] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.740054] usb-storage: Status code 0; transferred 31/31 [ 31.740057] usb-storage: -- transfer complete [ 31.740061] usb-storage: Bulk command transfer result=0 [ 31.740065] usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries [ 31.740180] usb-storage: Status code -121; transferred 36/192 [ 31.740185] usb-storage: -- short read transfer [ 31.740190] usb-storage: Bulk data transfer result 0x1 [ 31.740194] usb-storage: Attempting to get CSW... [ 31.740199] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.740422] usb-storage: Status code 0; transferred 13/13 [ 31.740426] usb-storage: -- transfer complete [ 31.740429] usb-storage: Bulk status result = 0 [ 31.740434] usb-storage: Bulk Status S 0x53425355 T 0x6 R 0 Stat 0x0 [ 31.740438] usb-storage: scsi cmd done, result=0x0 [ 31.740444] usb-storage: *** thread sleeping. [ 31.740462] sd 4:0:0:0: [sdb] Write Protect is off [ 31.740602] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 31.740607] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 31.740850] usb-storage: queuecommand called [ 31.740864] usb-storage: *** thread awakened. [ 31.740868] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 31.740872] usb-storage: 00 00 00 00 00 00 [ 31.740882] usb-storage: Bulk Command S 0x43425355 T 0x7 L 0 F 0 Trg 0 LUN 0 CL 6 [ 31.740887] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.741062] usb-storage: Status code 0; transferred 31/31 [ 31.741065] usb-storage: -- transfer complete [ 31.741069] usb-storage: Bulk command transfer result=0 [ 31.741072] usb-storage: Attempting to get CSW... [ 31.741076] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.741192] usb-storage: Status code 0; transferred 13/13 [ 31.741195] usb-storage: -- transfer complete [ 31.741199] usb-storage: Bulk status result = 0 [ 31.741203] usb-storage: Bulk Status S 0x53425355 T 0x7 R 0 Stat 0x0 [ 31.741208] usb-storage: scsi cmd done, result=0x0 [ 31.741213] usb-storage: *** thread sleeping. [ 31.741238] usb-storage: queuecommand called [ 31.741245] usb-storage: *** thread awakened. [ 31.741250] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes) [ 31.741276] usb-storage: 1e 00 00 00 01 00 [ 31.741287] usb-storage: Bulk Command S 0x43425355 T 0x8 L 0 F 0 Trg 0 LUN 0 CL 6 [ 31.741292] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.741816] usb-storage: Status code 0; transferred 31/31 [ 31.741821] usb-storage: -- transfer complete [ 31.741824] usb-storage: Bulk command transfer result=0 [ 31.741828] usb-storage: Attempting to get CSW... [ 31.741832] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.741930] usb-storage: Status code 0; transferred 13/13 [ 31.741933] usb-storage: -- transfer complete [ 31.741937] usb-storage: Bulk status result = 0 [ 31.741941] usb-storage: Bulk Status S 0x53425355 T 0x8 R 0 Stat 0x1 [ 31.741945] usb-storage: -- transport indicates command failure [ 31.741949] usb-storage: Issuing auto-REQUEST_SENSE [ 31.741955] usb-storage: Bulk Command S 0x43425355 T 0x9 L 18 F 128 Trg 0 LUN 0 CL 6 [ 31.741960] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.742046] usb-storage: Status code 0; transferred 31/31 [ 31.742049] usb-storage: -- transfer complete [ 31.742053] usb-storage: Bulk command transfer result=0 [ 31.742057] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries [ 31.742175] usb-storage: Status code 0; transferred 18/18 [ 31.742179] usb-storage: -- transfer complete [ 31.742182] usb-storage: Bulk data transfer result 0x0 [ 31.742186] usb-storage: Attempting to get CSW... [ 31.742190] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.742582] usb-storage: Status code 0; transferred 13/13 [ 31.742586] usb-storage: -- transfer complete [ 31.742591] usb-storage: Bulk status result = 0 [ 31.742596] usb-storage: Bulk Status S 0x53425355 T 0x9 R 0 Stat 0x0 [ 31.742600] usb-storage: -- Result from auto-sense is 0 [ 31.742605] usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0 [ 31.742610] usb-storage: Illegal Request: Invalid field in cdb [ 31.742616] usb-storage: scsi cmd done, result=0x2 [ 31.742622] usb-storage: *** thread sleeping. [ 31.742935] usb-storage: queuecommand called [ 31.742945] usb-storage: *** thread awakened. [ 31.742950] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 31.742953] usb-storage: 00 00 00 00 00 00 [ 31.742964] usb-storage: Bulk Command S 0x43425355 T 0xa L 0 F 0 Trg 0 LUN 0 CL 6 [ 31.742969] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.743042] usb-storage: Status code 0; transferred 31/31 [ 31.743045] usb-storage: -- transfer complete [ 31.743049] usb-storage: Bulk command transfer result=0 [ 31.743052] usb-storage: Attempting to get CSW... [ 31.743056] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.743172] usb-storage: Status code 0; transferred 13/13 [ 31.743176] usb-storage: -- transfer complete [ 31.743179] usb-storage: Bulk status result = 0 [ 31.743184] usb-storage: Bulk Status S 0x53425355 T 0xa R 0 Stat 0x0 [ 31.743188] usb-storage: scsi cmd done, result=0x0 [ 31.743194] usb-storage: *** thread sleeping. [ 31.743221] usb-storage: queuecommand called [ 31.743229] usb-storage: *** thread awakened. [ 31.743233] usb-storage: Command READ_CAPACITY (10 bytes) [ 31.743237] usb-storage: 25 00 00 00 00 00 00 00 00 00 [ 31.743251] usb-storage: Bulk Command S 0x43425355 T 0xb L 8 F 128 Trg 0 LUN 0 CL 10 [ 31.743272] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.743703] usb-storage: Status code 0; transferred 31/31 [ 31.743708] usb-storage: -- transfer complete [ 31.743711] usb-storage: Bulk command transfer result=0 [ 31.743716] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes, 1 entries [ 31.743768] usb-storage: Status code 0; transferred 8/8 [ 31.743771] usb-storage: -- transfer complete [ 31.743775] usb-storage: Bulk data transfer result 0x0 [ 31.743779] usb-storage: Attempting to get CSW... [ 31.743782] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.743890] usb-storage: Status code 0; transferred 13/13 [ 31.743894] usb-storage: -- transfer complete [ 31.743898] usb-storage: Bulk status result = 0 [ 31.743902] usb-storage: Bulk Status S 0x53425355 T 0xb R 0 Stat 0x0 [ 31.743907] usb-storage: scsi cmd done, result=0x0 [ 31.743912] usb-storage: *** thread sleeping. [ 31.743937] sd 4:0:0:0: [sdb] 2015232 512-byte hardware sectors: (1.03 GB/984 MiB) [ 31.744195] usb-storage: queuecommand called [ 31.744209] usb-storage: *** thread awakened. [ 31.744213] usb-storage: Command MODE_SENSE (6 bytes) [ 31.744216] usb-storage: 1a 00 3f 00 c0 00 [ 31.744228] usb-storage: Bulk Command S 0x43425355 T 0xc L 192 F 128 Trg 0 LUN 0 CL 6 [ 31.744233] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.744633] usb-storage: Status code 0; transferred 31/31 [ 31.744637] usb-storage: -- transfer complete [ 31.744640] usb-storage: Bulk command transfer result=0 [ 31.744645] usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries [ 31.744809] usb-storage: Status code -121; transferred 36/192 [ 31.744813] usb-storage: -- short read transfer [ 31.744817] usb-storage: Bulk data transfer result 0x1 [ 31.744820] usb-storage: Attempting to get CSW... [ 31.744824] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.745018] usb-storage: Status code 0; transferred 13/13 [ 31.745022] usb-storage: -- transfer complete [ 31.745025] usb-storage: Bulk status result = 0 [ 31.745030] usb-storage: Bulk Status S 0x53425355 T 0xc R 0 Stat 0x0 [ 31.745035] usb-storage: scsi cmd done, result=0x0 [ 31.745041] usb-storage: *** thread sleeping. [ 31.745062] sd 4:0:0:0: [sdb] Write Protect is off [ 31.745211] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 31.745216] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 31.745674] sdb:<7>usb-storage: queuecommand called [ 31.745906] usb-storage: *** thread awakened. [ 31.745910] usb-storage: Command READ_10 (10 bytes) [ 31.745914] usb-storage: 28 00 00 00 00 00 00 00 08 00 [ 31.745929] usb-storage: Bulk Command S 0x43425355 T 0xd L 4096 F 128 Trg 0 LUN 0 CL 10 [ 31.745934] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.746018] usb-storage: Status code 0; transferred 31/31 [ 31.746022] usb-storage: -- transfer complete [ 31.746025] usb-storage: Bulk command transfer result=0 [ 31.746030] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries [ 31.746469] usb-storage: Status code 0; transferred 4096/4096 [ 31.746473] usb-storage: -- transfer complete [ 31.746477] usb-storage: Bulk data transfer result 0x0 [ 31.746481] usb-storage: Attempting to get CSW... [ 31.746485] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.746646] usb-storage: Status code 0; transferred 13/13 [ 31.746650] usb-storage: -- transfer complete [ 31.746653] usb-storage: Bulk status result = 0 [ 31.746658] usb-storage: Bulk Status S 0x53425355 T 0xd R 0 Stat 0x0 [ 31.746663] usb-storage: scsi cmd done, result=0x0 [ 31.746668] usb-storage: *** thread sleeping. [ 31.746692] sdb1 [ 31.747642] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 31.747934] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 31.748143] usb-storage: queuecommand called [ 31.748155] usb-storage: *** thread awakened. [ 31.748159] usb-storage: Bad target number (1:0) [ 31.748163] usb-storage: scsi cmd done, result=0x40000 [ 31.748168] usb-storage: *** thread sleeping. [ 31.749572] usb-storage: queuecommand called [ 31.749588] usb-storage: *** thread awakened. [ 31.749593] usb-storage: Bad target number (2:0) [ 31.749597] usb-storage: scsi cmd done, result=0x40000 [ 31.749602] usb-storage: *** thread sleeping. [ 31.749667] usb-storage: queuecommand called [ 31.749676] usb-storage: *** thread awakened. [ 31.749680] usb-storage: Bad target number (3:0) [ 31.749684] usb-storage: scsi cmd done, result=0x40000 [ 31.749689] usb-storage: *** thread sleeping. [ 31.749751] usb-storage: queuecommand called [ 31.749761] usb-storage: *** thread awakened. [ 31.749764] usb-storage: Bad target number (4:0) [ 31.749768] usb-storage: scsi cmd done, result=0x40000 [ 31.749773] usb-storage: *** thread sleeping. [ 31.749834] usb-storage: queuecommand called [ 31.749843] usb-storage: *** thread awakened. [ 31.749847] usb-storage: Bad target number (5:0) [ 31.749851] usb-storage: scsi cmd done, result=0x40000 [ 31.749856] usb-storage: *** thread sleeping. [ 31.749915] usb-storage: queuecommand called [ 31.749925] usb-storage: *** thread awakened. [ 31.749928] usb-storage: Bad target number (6:0) [ 31.749932] usb-storage: scsi cmd done, result=0x40000 [ 31.749937] usb-storage: *** thread sleeping. [ 31.749998] usb-storage: queuecommand called [ 31.750008] usb-storage: *** thread awakened. [ 31.750011] usb-storage: Bad target number (7:0) [ 31.750015] usb-storage: scsi cmd done, result=0x40000 [ 31.750020] usb-storage: *** thread sleeping. [ 31.750044] usb-storage: device scan complete [ 31.750055] usb-stor-scan used greatest stack depth: 3928 bytes left [ 31.792513] usb-storage: queuecommand called [ 31.792524] usb-storage: *** thread awakened. [ 31.792527] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 31.792529] usb-storage: 00 00 00 00 00 00 [ 31.792535] usb-storage: Bulk Command S 0x43425355 T 0xe L 0 F 0 Trg 0 LUN 0 CL 6 [ 31.792537] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.792666] usb-storage: Status code 0; transferred 31/31 [ 31.792667] usb-storage: -- transfer complete [ 31.792669] usb-storage: Bulk command transfer result=0 [ 31.792670] usb-storage: Attempting to get CSW... [ 31.792672] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.792785] usb-storage: Status code 0; transferred 13/13 [ 31.792786] usb-storage: -- transfer complete [ 31.792788] usb-storage: Bulk status result = 0 [ 31.792790] usb-storage: Bulk Status S 0x53425355 T 0xe R 0 Stat 0x0 [ 31.792792] usb-storage: scsi cmd done, result=0x0 [ 31.792795] usb-storage: *** thread sleeping. [ 31.793141] usb-storage: queuecommand called [ 31.793146] usb-storage: *** thread awakened. [ 31.793148] usb-storage: Command READ_10 (10 bytes) [ 31.793150] usb-storage: 28 00 00 00 00 00 00 00 20 00 [ 31.793156] usb-storage: Bulk Command S 0x43425355 T 0xf L 16384 F 128 Trg 0 LUN 0 CL 10 [ 31.793159] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.794137] usb-storage: Status code 0; transferred 31/31 [ 31.794139] usb-storage: -- transfer complete [ 31.794141] usb-storage: Bulk command transfer result=0 [ 31.794143] usb-storage: usb_stor_bulk_transfer_sglist: xfer 16384 bytes, 3 entries [ 31.795055] usb-storage: Status code 0; transferred 16384/16384 [ 31.795058] usb-storage: -- transfer complete [ 31.795059] usb-storage: Bulk data transfer result 0x0 [ 31.795061] usb-storage: Attempting to get CSW... [ 31.795063] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.795167] usb-storage: Status code 0; transferred 13/13 [ 31.795169] usb-storage: -- transfer complete [ 31.795171] usb-storage: Bulk status result = 0 [ 31.795173] usb-storage: Bulk Status S 0x53425355 T 0xf R 0 Stat 0x0 [ 31.795175] usb-storage: scsi cmd done, result=0x0 [ 31.795177] usb-storage: *** thread sleeping. [ 31.795219] usb-storage: queuecommand called [ 31.795226] usb-storage: *** thread awakened. [ 31.795228] usb-storage: Command READ_10 (10 bytes) [ 31.795229] usb-storage: 28 00 00 1e bf 80 00 00 08 00 [ 31.795236] usb-storage: Bulk Command S 0x43425355 T 0x10 L 4096 F 128 Trg 0 LUN 0 CL 10 [ 31.795238] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.795439] usb-storage: Status code 0; transferred 31/31 [ 31.795441] usb-storage: -- transfer complete [ 31.795442] usb-storage: Bulk command transfer result=0 [ 31.795445] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries [ 31.987082] usb-storage: Status code 0; transferred 4096/4096 [ 31.987085] usb-storage: -- transfer complete [ 31.987087] usb-storage: Bulk data transfer result 0x0 [ 31.987089] usb-storage: Attempting to get CSW... [ 31.987091] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.987182] usb-storage: Status code 0; transferred 13/13 [ 31.987184] usb-storage: -- transfer complete [ 31.987185] usb-storage: Bulk status result = 0 [ 31.987188] usb-storage: Bulk Status S 0x53425355 T 0x10 R 0 Stat 0x0 [ 31.987191] usb-storage: scsi cmd done, result=0x0 [ 31.987194] usb-storage: *** thread sleeping. [ 31.987233] usb-storage: queuecommand called [ 31.987239] usb-storage: *** thread awakened. [ 31.987241] usb-storage: Command READ_10 (10 bytes) [ 31.987243] usb-storage: 28 00 00 1e bf f0 00 00 08 00 [ 31.987250] usb-storage: Bulk Command S 0x43425355 T 0x11 L 4096 F 128 Trg 0 LUN 0 CL 10 [ 31.987265] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.987462] usb-storage: Status code 0; transferred 31/31 [ 31.987465] usb-storage: -- transfer complete [ 31.987466] usb-storage: Bulk command transfer result=0 [ 31.987469] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries [ 31.987807] usb-storage: Status code 0; transferred 4096/4096 [ 31.987809] usb-storage: -- transfer complete [ 31.987811] usb-storage: Bulk data transfer result 0x0 [ 31.987812] usb-storage: Attempting to get CSW... [ 31.987814] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.987923] usb-storage: Status code 0; transferred 13/13 [ 31.987925] usb-storage: -- transfer complete [ 31.987926] usb-storage: Bulk status result = 0 [ 31.987929] usb-storage: Bulk Status S 0x53425355 T 0x11 R 0 Stat 0x0 [ 31.987931] usb-storage: scsi cmd done, result=0x0 [ 31.987934] usb-storage: *** thread sleeping. [ 31.987988] usb-storage: queuecommand called [ 31.987996] usb-storage: *** thread awakened. [ 31.987998] usb-storage: Command READ_10 (10 bytes) [ 31.987999] usb-storage: 28 00 00 1e bf f8 00 00 01 00 [ 31.988007] usb-storage: Bulk Command S 0x43425355 T 0x12 L 512 F 128 Trg 0 LUN 0 CL 10 [ 31.988010] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.988176] usb-storage: Status code 0; transferred 31/31 [ 31.988179] usb-storage: -- transfer complete [ 31.988183] usb-storage: Bulk command transfer result=0 [ 31.988188] usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries [ 31.988838] usb-storage: Status code 0; transferred 512/512 [ 31.988842] usb-storage: -- transfer complete [ 31.988846] usb-storage: Bulk data transfer result 0x0 [ 31.988849] usb-storage: Attempting to get CSW... [ 31.988853] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.988923] usb-storage: Status code 0; transferred 13/13 [ 31.988926] usb-storage: -- transfer complete [ 31.988930] usb-storage: Bulk status result = 0 [ 31.988934] usb-storage: Bulk Status S 0x53425355 T 0x12 R 0 Stat 0x0 [ 31.988939] usb-storage: scsi cmd done, result=0x0 [ 31.988944] usb-storage: *** thread sleeping. [ 31.988960] usb-storage: queuecommand called [ 31.988969] usb-storage: *** thread awakened. [ 31.988973] usb-storage: Command READ_10 (10 bytes) [ 31.988976] usb-storage: 28 00 00 1e bf f9 00 00 01 00 [ 31.988991] usb-storage: Bulk Command S 0x43425355 T 0x13 L 512 F 128 Trg 0 LUN 0 CL 10 [ 31.988996] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.989198] usb-storage: Status code 0; transferred 31/31 [ 31.989201] usb-storage: -- transfer complete [ 31.989205] usb-storage: Bulk command transfer result=0 [ 31.989210] usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries [ 31.989726] usb-storage: Status code 0; transferred 512/512 [ 31.989730] usb-storage: -- transfer complete [ 31.989734] usb-storage: Bulk data transfer result 0x0 [ 31.989737] usb-storage: Attempting to get CSW... [ 31.989741] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.989940] usb-storage: Status code 0; transferred 13/13 [ 31.989943] usb-storage: -- transfer complete [ 31.989947] usb-storage: Bulk status result = 0 [ 31.989951] usb-storage: Bulk Status S 0x53425355 T 0x13 R 0 Stat 0x0 [ 31.989956] usb-storage: scsi cmd done, result=0x0 [ 31.989966] usb-storage: *** thread sleeping. [ 31.989981] usb-storage: queuecommand called [ 31.989990] usb-storage: *** thread awakened. [ 31.989994] usb-storage: Command READ_10 (10 bytes) [ 31.989997] usb-storage: 28 00 00 1e bf fa 00 00 01 00 [ 31.990012] usb-storage: Bulk Command S 0x43425355 T 0x14 L 512 F 128 Trg 0 LUN 0 CL 10 [ 31.990017] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.990199] usb-storage: Status code 0; transferred 31/31 [ 31.990203] usb-storage: -- transfer complete [ 31.990207] usb-storage: Bulk command transfer result=0 [ 31.990211] usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries [ 31.990714] usb-storage: Status code 0; transferred 512/512 [ 31.990718] usb-storage: -- transfer complete [ 31.990722] usb-storage: Bulk data transfer result 0x0 [ 31.990726] usb-storage: Attempting to get CSW... [ 31.990729] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.990804] usb-storage: Status code 0; transferred 13/13 [ 31.990808] usb-storage: -- transfer complete [ 31.990811] usb-storage: Bulk status result = 0 [ 31.990816] usb-storage: Bulk Status S 0x53425355 T 0x14 R 0 Stat 0x0 [ 31.990821] usb-storage: scsi cmd done, result=0x0 [ 31.990826] usb-storage: *** thread sleeping. [ 31.990841] usb-storage: queuecommand called [ 31.990849] usb-storage: *** thread awakened. [ 31.990853] usb-storage: Command READ_10 (10 bytes) [ 31.990856] usb-storage: 28 00 00 1e bf fb 00 00 01 00 [ 31.990871] usb-storage: Bulk Command S 0x43425355 T 0x15 L 512 F 128 Trg 0 LUN 0 CL 10 [ 31.990876] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.991068] usb-storage: Status code 0; transferred 31/31 [ 31.991072] usb-storage: -- transfer complete [ 31.991075] usb-storage: Bulk command transfer result=0 [ 31.991080] usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries [ 31.991210] usb-storage: Status code 0; transferred 512/512 [ 31.991213] usb-storage: -- transfer complete [ 31.991217] usb-storage: Bulk data transfer result 0x0 [ 31.991220] usb-storage: Attempting to get CSW... [ 31.991224] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.991810] usb-storage: Status code 0; transferred 13/13 [ 31.991814] usb-storage: -- transfer complete [ 31.991817] usb-storage: Bulk status result = 0 [ 31.991822] usb-storage: Bulk Status S 0x53425355 T 0x15 R 0 Stat 0x0 [ 31.991827] usb-storage: scsi cmd done, result=0x0 [ 31.991832] usb-storage: *** thread sleeping. [ 31.991847] usb-storage: queuecommand called [ 31.991855] usb-storage: *** thread awakened. [ 31.991859] usb-storage: Command READ_10 (10 bytes) [ 31.991863] usb-storage: 28 00 00 1e bf fc 00 00 01 00 [ 31.991877] usb-storage: Bulk Command S 0x43425355 T 0x16 L 512 F 128 Trg 0 LUN 0 CL 10 [ 31.991882] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.992066] usb-storage: Status code 0; transferred 31/31 [ 31.992069] usb-storage: -- transfer complete [ 31.992073] usb-storage: Bulk command transfer result=0 [ 31.992078] usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries [ 31.992205] usb-storage: Status code 0; transferred 512/512 [ 31.992209] usb-storage: -- transfer complete [ 31.992212] usb-storage: Bulk data transfer result 0x0 [ 31.992216] usb-storage: Attempting to get CSW... [ 31.992220] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.992697] usb-storage: Status code 0; transferred 13/13 [ 31.992701] usb-storage: -- transfer complete [ 31.992704] usb-storage: Bulk status result = 0 [ 31.992709] usb-storage: Bulk Status S 0x53425355 T 0x16 R 0 Stat 0x0 [ 31.992713] usb-storage: scsi cmd done, result=0x0 [ 31.992724] usb-storage: *** thread sleeping. [ 31.992738] usb-storage: queuecommand called [ 31.992747] usb-storage: *** thread awakened. [ 31.992751] usb-storage: Command READ_10 (10 bytes) [ 31.992754] usb-storage: 28 00 00 1e bf fd 00 00 01 00 [ 31.992769] usb-storage: Bulk Command S 0x43425355 T 0x17 L 512 F 128 Trg 0 LUN 0 CL 10 [ 31.992774] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.992939] usb-storage: Status code 0; transferred 31/31 [ 31.992943] usb-storage: -- transfer complete [ 31.992947] usb-storage: Bulk command transfer result=0 [ 31.992951] usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries [ 31.993082] usb-storage: Status code 0; transferred 512/512 [ 31.993086] usb-storage: -- transfer complete [ 31.993090] usb-storage: Bulk data transfer result 0x0 [ 31.993093] usb-storage: Attempting to get CSW... [ 31.993097] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.993188] usb-storage: Status code 0; transferred 13/13 [ 31.993192] usb-storage: -- transfer complete [ 31.993195] usb-storage: Bulk status result = 0 [ 31.993200] usb-storage: Bulk Status S 0x53425355 T 0x17 R 0 Stat 0x0 [ 31.993204] usb-storage: scsi cmd done, result=0x0 [ 31.993209] usb-storage: *** thread sleeping. [ 31.993222] usb-storage: queuecommand called [ 31.993235] usb-storage: *** thread awakened. [ 31.993239] usb-storage: Command READ_10 (10 bytes) [ 31.993242] usb-storage: 28 00 00 1e bf fe 00 00 01 00 [ 31.993271] usb-storage: Bulk Command S 0x43425355 T 0x18 L 512 F 128 Trg 0 LUN 0 CL 10 [ 31.993276] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.993914] usb-storage: Status code 0; transferred 31/31 [ 31.993918] usb-storage: -- transfer complete [ 31.993922] usb-storage: Bulk command transfer result=0 [ 31.993926] usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries [ 31.994090] usb-storage: Status code 0; transferred 512/512 [ 31.994094] usb-storage: -- transfer complete [ 31.994098] usb-storage: Bulk data transfer result 0x0 [ 31.994101] usb-storage: Attempting to get CSW... [ 31.994105] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.994523] usb-storage: Status code 0; transferred 13/13 [ 31.994527] usb-storage: -- transfer complete [ 31.994530] usb-storage: Bulk status result = 0 [ 31.994535] usb-storage: Bulk Status S 0x53425355 T 0x18 R 0 Stat 0x0 [ 31.994540] usb-storage: scsi cmd done, result=0x0 [ 31.994545] usb-storage: *** thread sleeping. [ 31.994560] usb-storage: queuecommand called [ 31.994568] usb-storage: *** thread awakened. [ 31.994572] usb-storage: Command READ_10 (10 bytes) [ 31.994575] usb-storage: 28 00 00 1e bf ff 00 00 01 00 [ 31.994590] usb-storage: Bulk Command S 0x43425355 T 0x19 L 512 F 128 Trg 0 LUN 0 CL 10 [ 31.994595] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.994693] usb-storage: Status code 0; transferred 31/31 [ 31.994696] usb-storage: -- transfer complete [ 31.994700] usb-storage: Bulk command transfer result=0 [ 31.994704] usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries [ 31.994940] usb-storage: Status code 0; transferred 512/512 [ 31.994944] usb-storage: -- transfer complete [ 31.994947] usb-storage: Bulk data transfer result 0x0 [ 31.994951] usb-storage: Attempting to get CSW... [ 31.994954] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.995069] usb-storage: Status code 0; transferred 13/13 [ 31.995073] usb-storage: -- transfer complete [ 31.995076] usb-storage: Bulk status result = 0 [ 31.995081] usb-storage: Bulk Status S 0x53425355 T 0x19 R 0 Stat 0x0 [ 31.995085] usb-storage: scsi cmd done, result=0x0 [ 31.995091] usb-storage: *** thread sleeping. [ 31.995109] usb-storage: queuecommand called [ 31.995181] usb-storage: *** thread awakened. [ 31.995186] usb-storage: Command READ_10 (10 bytes) [ 31.995189] usb-storage: 28 00 00 00 00 20 00 00 40 00 [ 31.995204] usb-storage: Bulk Command S 0x43425355 T 0x1a L 32768 F 128 Trg 0 LUN 0 CL 10 [ 31.995209] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.995932] usb-storage: Status code 0; transferred 31/31 [ 31.995936] usb-storage: -- transfer complete [ 31.995940] usb-storage: Bulk command transfer result=0 [ 31.995944] usb-storage: usb_stor_bulk_transfer_sglist: xfer 32768 bytes, 7 entries [ 31.999280] usb-storage: Status code 0; transferred 32768/32768 [ 31.999284] usb-storage: -- transfer complete [ 31.999288] usb-storage: Bulk data transfer result 0x0 [ 31.999291] usb-storage: Attempting to get CSW... [ 31.999296] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 31.999446] usb-storage: Status code 0; transferred 13/13 [ 31.999450] usb-storage: -- transfer complete [ 31.999453] usb-storage: Bulk status result = 0 [ 31.999458] usb-storage: Bulk Status S 0x53425355 T 0x1a R 0 Stat 0x0 [ 31.999463] usb-storage: scsi cmd done, result=0x0 [ 31.999468] usb-storage: *** thread sleeping. [ 31.999491] usb-storage: queuecommand called [ 31.999499] usb-storage: *** thread awakened. [ 31.999503] usb-storage: Command READ_10 (10 bytes) [ 31.999507] usb-storage: 28 00 00 1e bf c0 00 00 08 00 [ 31.999522] usb-storage: Bulk Command S 0x43425355 T 0x1b L 4096 F 128 Trg 0 LUN 0 CL 10 [ 31.999527] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 31.999689] usb-storage: Status code 0; transferred 31/31 [ 31.999693] usb-storage: -- transfer complete [ 31.999696] usb-storage: Bulk command transfer result=0 [ 31.999701] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries [ 32.001583] usb-storage: Status code 0; transferred 4096/4096 [ 32.001587] usb-storage: -- transfer complete [ 32.001591] usb-storage: Bulk data transfer result 0x0 [ 32.001595] usb-storage: Attempting to get CSW... [ 32.001599] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.001666] usb-storage: Status code 0; transferred 13/13 [ 32.001670] usb-storage: -- transfer complete [ 32.001673] usb-storage: Bulk status result = 0 [ 32.001678] usb-storage: Bulk Status S 0x53425355 T 0x1b R 0 Stat 0x0 [ 32.001682] usb-storage: scsi cmd done, result=0x0 [ 32.001688] usb-storage: *** thread sleeping. [ 32.001743] usb-storage: queuecommand called [ 32.001754] usb-storage: *** thread awakened. [ 32.001758] usb-storage: Command READ_10 (10 bytes) [ 32.001761] usb-storage: 28 00 00 1e bf 00 00 00 08 00 [ 32.001776] usb-storage: Bulk Command S 0x43425355 T 0x1c L 4096 F 128 Trg 0 LUN 0 CL 10 [ 32.001781] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.001940] usb-storage: Status code 0; transferred 31/31 [ 32.001943] usb-storage: -- transfer complete [ 32.001947] usb-storage: Bulk command transfer result=0 [ 32.001951] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries [ 32.002756] usb-storage: Status code 0; transferred 4096/4096 [ 32.002760] usb-storage: -- transfer complete [ 32.002764] usb-storage: Bulk data transfer result 0x0 [ 32.002767] usb-storage: Attempting to get CSW... [ 32.002771] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.002944] usb-storage: Status code 0; transferred 13/13 [ 32.002947] usb-storage: -- transfer complete [ 32.002951] usb-storage: Bulk status result = 0 [ 32.002955] usb-storage: Bulk Status S 0x53425355 T 0x1c R 0 Stat 0x0 [ 32.002960] usb-storage: scsi cmd done, result=0x0 [ 32.002965] usb-storage: *** thread sleeping. [ 32.003028] usb-storage: queuecommand called [ 32.003039] usb-storage: *** thread awakened. [ 32.003043] usb-storage: Command READ_10 (10 bytes) [ 32.003046] usb-storage: 28 00 00 1e be 70 00 00 08 00 [ 32.003061] usb-storage: Bulk Command S 0x43425355 T 0x1d L 4096 F 128 Trg 0 LUN 0 CL 10 [ 32.003066] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.003197] usb-storage: Status code 0; transferred 31/31 [ 32.003200] usb-storage: -- transfer complete [ 32.003204] usb-storage: Bulk command transfer result=0 [ 32.003208] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries [ 32.003765] usb-storage: Status code 0; transferred 4096/4096 [ 32.003769] usb-storage: -- transfer complete [ 32.003773] usb-storage: Bulk data transfer result 0x0 [ 32.003776] usb-storage: Attempting to get CSW... [ 32.003780] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.003940] usb-storage: Status code 0; transferred 13/13 [ 32.003943] usb-storage: -- transfer complete [ 32.003947] usb-storage: Bulk status result = 0 [ 32.003951] usb-storage: Bulk Status S 0x53425355 T 0x1d R 0 Stat 0x0 [ 32.003956] usb-storage: scsi cmd done, result=0x0 [ 32.003961] usb-storage: *** thread sleeping. [ 32.004325] usb-storage: queuecommand called [ 32.004589] usb-storage: *** thread awakened. [ 32.004594] usb-storage: Command READ_10 (10 bytes) [ 32.004597] usb-storage: 28 00 00 00 00 60 00 00 f0 00 [ 32.004612] usb-storage: Bulk Command S 0x43425355 T 0x1e L 122880 F 128 Trg 0 LUN 0 CL 10 [ 32.004617] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.004820] usb-storage: Status code 0; transferred 31/31 [ 32.004823] usb-storage: -- transfer complete [ 32.004827] usb-storage: Bulk command transfer result=0 [ 32.004832] usb-storage: usb_stor_bulk_transfer_sglist: xfer 122880 bytes, 30 entries [ 32.014802] usb-storage: Status code 0; transferred 122880/122880 [ 32.014807] usb-storage: -- transfer complete [ 32.014811] usb-storage: Bulk data transfer result 0x0 [ 32.014814] usb-storage: Attempting to get CSW... [ 32.014818] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.014939] usb-storage: Status code 0; transferred 13/13 [ 32.014943] usb-storage: -- transfer complete [ 32.014946] usb-storage: Bulk status result = 0 [ 32.014951] usb-storage: Bulk Status S 0x53425355 T 0x1e R 0 Stat 0x0 [ 32.014955] usb-storage: scsi cmd done, result=0x0 [ 32.014961] usb-storage: *** thread sleeping. [ 32.015004] usb-storage: queuecommand called [ 32.015748] usb-storage: *** thread awakened. [ 32.015754] usb-storage: Command READ_10 (10 bytes) [ 32.015757] usb-storage: 28 00 00 00 01 50 00 00 90 00 [ 32.015772] usb-storage: Bulk Command S 0x43425355 T 0x1f L 73728 F 128 Trg 0 LUN 0 CL 10 [ 32.015778] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.015945] usb-storage: Status code 0; transferred 31/31 [ 32.015949] usb-storage: -- transfer complete [ 32.015953] usb-storage: Bulk command transfer result=0 [ 32.015957] usb-storage: usb_stor_bulk_transfer_sglist: xfer 73728 bytes, 18 entries [ 32.020964] usb-storage: Status code 0; transferred 73728/73728 [ 32.020968] usb-storage: -- transfer complete [ 32.020972] usb-storage: Bulk data transfer result 0x0 [ 32.020975] usb-storage: Attempting to get CSW... [ 32.020979] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.021059] usb-storage: Status code 0; transferred 13/13 [ 32.021063] usb-storage: -- transfer complete [ 32.021066] usb-storage: Bulk status result = 0 [ 32.021071] usb-storage: Bulk Status S 0x53425355 T 0x1f R 0 Stat 0x0 [ 32.021076] usb-storage: scsi cmd done, result=0x0 [ 32.021081] usb-storage: *** thread sleeping. [ 32.028799] usb-storage: queuecommand called [ 32.029660] usb-storage: *** thread awakened. [ 32.029667] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 32.029671] usb-storage: 00 00 00 00 00 00 [ 32.029682] usb-storage: Bulk Command S 0x43425355 T 0x20 L 0 F 0 Trg 0 LUN 0 CL 6 [ 32.029687] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.029796] usb-storage: Status code 0; transferred 31/31 [ 32.029800] usb-storage: -- transfer complete [ 32.029804] usb-storage: Bulk command transfer result=0 [ 32.029807] usb-storage: Attempting to get CSW... [ 32.029811] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.029931] usb-storage: Status code 0; transferred 13/13 [ 32.029934] usb-storage: -- transfer complete [ 32.029938] usb-storage: Bulk status result = 0 [ 32.029942] usb-storage: Bulk Status S 0x53425355 T 0x20 R 0 Stat 0x0 [ 32.029947] usb-storage: scsi cmd done, result=0x0 [ 32.029953] usb-storage: *** thread sleeping. [ 32.030098] usb-storage: queuecommand called [ 32.030150] usb-storage: *** thread awakened. [ 32.030155] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 32.030158] usb-storage: 00 00 00 00 00 00 [ 32.030169] usb-storage: Bulk Command S 0x43425355 T 0x21 L 0 F 0 Trg 0 LUN 0 CL 6 [ 32.030174] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.030786] usb-storage: Status code 0; transferred 31/31 [ 32.030790] usb-storage: -- transfer complete [ 32.030794] usb-storage: Bulk command transfer result=0 [ 32.030797] usb-storage: Attempting to get CSW... [ 32.030801] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.030935] usb-storage: Status code 0; transferred 13/13 [ 32.030939] usb-storage: -- transfer complete [ 32.030942] usb-storage: Bulk status result = 0 [ 32.030947] usb-storage: Bulk Status S 0x53425355 T 0x21 R 0 Stat 0x0 [ 32.030951] usb-storage: scsi cmd done, result=0x0 [ 32.030957] usb-storage: *** thread sleeping. [ 32.031048] usb-storage: queuecommand called [ 32.031339] usb-storage: *** thread awakened. [ 32.031345] usb-storage: Command READ_10 (10 bytes) [ 32.031348] usb-storage: 28 00 00 00 00 00 00 00 20 00 [ 32.031363] usb-storage: Bulk Command S 0x43425355 T 0x22 L 16384 F 128 Trg 0 LUN 0 CL 10 [ 32.031368] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.031562] usb-storage: Status code 0; transferred 31/31 [ 32.031565] usb-storage: -- transfer complete [ 32.031569] usb-storage: Bulk command transfer result=0 [ 32.031574] usb-storage: usb_stor_bulk_transfer_sglist: xfer 16384 bytes, 3 entries [ 32.032557] usb-storage: Status code 0; transferred 16384/16384 [ 32.032562] usb-storage: -- transfer complete [ 32.032565] usb-storage: Bulk data transfer result 0x0 [ 32.032569] usb-storage: Attempting to get CSW... [ 32.032572] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.032679] usb-storage: Status code 0; transferred 13/13 [ 32.032683] usb-storage: -- transfer complete [ 32.032686] usb-storage: Bulk status result = 0 [ 32.032691] usb-storage: Bulk Status S 0x53425355 T 0x22 R 0 Stat 0x0 [ 32.032695] usb-storage: scsi cmd done, result=0x0 [ 32.032701] usb-storage: *** thread sleeping. [ 32.056453] usb-storage: queuecommand called [ 32.056491] usb-storage: *** thread awakened. [ 32.056494] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 32.056496] usb-storage: 00 00 00 00 00 00 [ 32.056502] usb-storage: Bulk Command S 0x43425355 T 0x23 L 0 F 0 Trg 0 LUN 0 CL 6 [ 32.056504] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.056686] usb-storage: Status code 0; transferred 31/31 [ 32.056687] usb-storage: -- transfer complete [ 32.056689] usb-storage: Bulk command transfer result=0 [ 32.056690] usb-storage: Attempting to get CSW... [ 32.056692] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.056800] usb-storage: Status code 0; transferred 13/13 [ 32.056801] usb-storage: -- transfer complete [ 32.056803] usb-storage: Bulk status result = 0 [ 32.056805] usb-storage: Bulk Status S 0x53425355 T 0x23 R 0 Stat 0x0 [ 32.056807] usb-storage: scsi cmd done, result=0x0 [ 32.056810] usb-storage: *** thread sleeping. [ 32.056855] usb-storage: queuecommand called [ 32.056886] usb-storage: *** thread awakened. [ 32.056888] usb-storage: Command START_STOP (6 bytes) [ 32.056889] usb-storage: 1b 00 00 00 02 00 [ 32.056894] usb-storage: Bulk Command S 0x43425355 T 0x24 L 0 F 0 Trg 0 LUN 0 CL 6 [ 32.056896] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.057328] usb-storage: Status code 0; transferred 31/31 [ 32.057329] usb-storage: -- transfer complete [ 32.057330] usb-storage: Bulk command transfer result=0 [ 32.057332] usb-storage: Attempting to get CSW... [ 32.057333] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.057430] usb-storage: Status code 0; transferred 13/13 [ 32.057432] usb-storage: -- transfer complete [ 32.057433] usb-storage: Bulk status result = 0 [ 32.057435] usb-storage: Bulk Status S 0x53425355 T 0x24 R 0 Stat 0x0 [ 32.057437] usb-storage: scsi cmd done, result=0x0 [ 32.057440] usb-storage: *** thread sleeping. [ 32.058987] usb-storage: queuecommand called [ 32.059053] usb-storage: *** thread awakened. [ 32.059055] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 32.059057] usb-storage: 00 00 00 00 00 00 [ 32.059062] usb-storage: Bulk Command S 0x43425355 T 0x25 L 0 F 0 Trg 0 LUN 0 CL 6 [ 32.059064] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.059191] usb-storage: Status code 0; transferred 31/31 [ 32.059193] usb-storage: -- transfer complete [ 32.059194] usb-storage: Bulk command transfer result=0 [ 32.059195] usb-storage: Attempting to get CSW... [ 32.059197] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.059403] usb-storage: Status code 0; transferred 13/13 [ 32.059404] usb-storage: -- transfer complete [ 32.059406] usb-storage: Bulk status result = 0 [ 32.059407] usb-storage: Bulk Status S 0x53425355 T 0x25 R 0 Stat 0x1 [ 32.059409] usb-storage: -- transport indicates command failure [ 32.059410] usb-storage: Issuing auto-REQUEST_SENSE [ 32.059413] usb-storage: Bulk Command S 0x43425355 T 0x26 L 18 F 128 Trg 0 LUN 0 CL 6 [ 32.059415] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.059556] usb-storage: Status code 0; transferred 31/31 [ 32.059557] usb-storage: -- transfer complete [ 32.059559] usb-storage: Bulk command transfer result=0 [ 32.059561] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries [ 32.059686] usb-storage: Status code 0; transferred 18/18 [ 32.059688] usb-storage: -- transfer complete [ 32.059690] usb-storage: Bulk data transfer result 0x0 [ 32.059691] usb-storage: Attempting to get CSW... [ 32.059693] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.059799] usb-storage: Status code 0; transferred 13/13 [ 32.059800] usb-storage: -- transfer complete [ 32.059802] usb-storage: Bulk status result = 0 [ 32.059804] usb-storage: Bulk Status S 0x53425355 T 0x26 R 0 Stat 0x0 [ 32.059806] usb-storage: -- Result from auto-sense is 0 [ 32.059807] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 [ 32.059811] usb-storage: Not Ready: Medium not present [ 32.059813] usb-storage: scsi cmd done, result=0x2 [ 32.059816] usb-storage: *** thread sleeping. [ 32.059883] usb-storage: queuecommand called [ 32.060293] usb-storage: *** thread awakened. [ 32.060296] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 32.060297] usb-storage: 00 00 00 00 00 00 [ 32.060301] usb-storage: Bulk Command S 0x43425355 T 0x27 L 0 F 0 Trg 0 LUN 0 CL 6 [ 32.060303] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.060437] usb-storage: Status code 0; transferred 31/31 [ 32.060439] usb-storage: -- transfer complete [ 32.060440] usb-storage: Bulk command transfer result=0 [ 32.060442] usb-storage: Attempting to get CSW... [ 32.060444] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.060549] usb-storage: Status code 0; transferred 13/13 [ 32.060551] usb-storage: -- transfer complete [ 32.060552] usb-storage: Bulk status result = 0 [ 32.060554] usb-storage: Bulk Status S 0x53425355 T 0x27 R 0 Stat 0x1 [ 32.060556] usb-storage: -- transport indicates command failure [ 32.060557] usb-storage: Issuing auto-REQUEST_SENSE [ 32.060560] usb-storage: Bulk Command S 0x43425355 T 0x28 L 18 F 128 Trg 0 LUN 0 CL 6 [ 32.060562] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.060686] usb-storage: Status code 0; transferred 31/31 [ 32.060687] usb-storage: -- transfer complete [ 32.060689] usb-storage: Bulk command transfer result=0 [ 32.060691] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries [ 32.060813] usb-storage: Status code 0; transferred 18/18 [ 32.060814] usb-storage: -- transfer complete [ 32.060816] usb-storage: Bulk data transfer result 0x0 [ 32.060817] usb-storage: Attempting to get CSW... [ 32.060819] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.060924] usb-storage: Status code 0; transferred 13/13 [ 32.060926] usb-storage: -- transfer complete [ 32.060927] usb-storage: Bulk status result = 0 [ 32.060929] usb-storage: Bulk Status S 0x53425355 T 0x28 R 0 Stat 0x0 [ 32.060931] usb-storage: -- Result from auto-sense is 0 [ 32.060933] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 [ 32.060935] usb-storage: Not Ready: Medium not present [ 32.060937] usb-storage: scsi cmd done, result=0x2 [ 32.060940] usb-storage: *** thread sleeping. [ 32.063601] usb-storage: queuecommand called [ 32.063606] usb-storage: *** thread awakened. [ 32.063608] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 32.063610] usb-storage: 00 00 00 00 00 00 [ 32.063614] usb-storage: Bulk Command S 0x43425355 T 0x29 L 0 F 0 Trg 0 LUN 0 CL 6 [ 32.063616] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.063795] usb-storage: Status code 0; transferred 31/31 [ 32.063797] usb-storage: -- transfer complete [ 32.063799] usb-storage: Bulk command transfer result=0 [ 32.063800] usb-storage: Attempting to get CSW... [ 32.063802] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.063916] usb-storage: Status code 0; transferred 13/13 [ 32.063918] usb-storage: -- transfer complete [ 32.063919] usb-storage: Bulk status result = 0 [ 32.063921] usb-storage: Bulk Status S 0x53425355 T 0x29 R 0 Stat 0x1 [ 32.063923] usb-storage: -- transport indicates command failure [ 32.063925] usb-storage: Issuing auto-REQUEST_SENSE [ 32.063927] usb-storage: Bulk Command S 0x43425355 T 0x2a L 18 F 128 Trg 0 LUN 0 CL 6 [ 32.063930] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.064050] usb-storage: Status code 0; transferred 31/31 [ 32.064051] usb-storage: -- transfer complete [ 32.064053] usb-storage: Bulk command transfer result=0 [ 32.064055] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries [ 32.064169] usb-storage: Status code 0; transferred 18/18 [ 32.064170] usb-storage: -- transfer complete [ 32.064172] usb-storage: Bulk data transfer result 0x0 [ 32.064173] usb-storage: Attempting to get CSW... [ 32.064175] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.064561] usb-storage: Status code 0; transferred 13/13 [ 32.064563] usb-storage: -- transfer complete [ 32.064565] usb-storage: Bulk status result = 0 [ 32.064567] usb-storage: Bulk Status S 0x53425355 T 0x2a R 0 Stat 0x0 [ 32.064568] usb-storage: -- Result from auto-sense is 0 [ 32.064570] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 [ 32.064573] usb-storage: Not Ready: Medium not present [ 32.064575] usb-storage: scsi cmd done, result=0x2 [ 32.064580] usb-storage: *** thread sleeping. [ 32.064593] usb-storage: queuecommand called [ 32.064597] usb-storage: *** thread awakened. [ 32.064599] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 32.064600] usb-storage: 00 00 00 00 00 00 [ 32.064605] usb-storage: Bulk Command S 0x43425355 T 0x2b L 0 F 0 Trg 0 LUN 0 CL 6 [ 32.064607] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.064668] usb-storage: Status code 0; transferred 31/31 [ 32.064669] usb-storage: -- transfer complete [ 32.064671] usb-storage: Bulk command transfer result=0 [ 32.064672] usb-storage: Attempting to get CSW... [ 32.064674] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.064798] usb-storage: Status code 0; transferred 13/13 [ 32.064800] usb-storage: -- transfer complete [ 32.064801] usb-storage: Bulk status result = 0 [ 32.064803] usb-storage: Bulk Status S 0x53425355 T 0x2b R 0 Stat 0x1 [ 32.064805] usb-storage: -- transport indicates command failure [ 32.064807] usb-storage: Issuing auto-REQUEST_SENSE [ 32.064809] usb-storage: Bulk Command S 0x43425355 T 0x2c L 18 F 128 Trg 0 LUN 0 CL 6 [ 32.064811] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.064917] usb-storage: Status code 0; transferred 31/31 [ 32.064919] usb-storage: -- transfer complete [ 32.064921] usb-storage: Bulk command transfer result=0 [ 32.064923] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries [ 32.065048] usb-storage: Status code 0; transferred 18/18 [ 32.065050] usb-storage: -- transfer complete [ 32.065051] usb-storage: Bulk data transfer result 0x0 [ 32.065053] usb-storage: Attempting to get CSW... [ 32.065054] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.065171] usb-storage: Status code 0; transferred 13/13 [ 32.065172] usb-storage: -- transfer complete [ 32.065174] usb-storage: Bulk status result = 0 [ 32.065176] usb-storage: Bulk Status S 0x53425355 T 0x2c R 0 Stat 0x0 [ 32.065179] usb-storage: -- Result from auto-sense is 0 [ 32.065181] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 [ 32.065183] usb-storage: Not Ready: Medium not present [ 32.065186] usb-storage: scsi cmd done, result=0x2 [ 32.065189] usb-storage: *** thread sleeping. [ 32.076988] usb-storage: queuecommand called [ 32.077026] usb-storage: *** thread awakened. [ 32.077029] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 32.077031] usb-storage: 00 00 00 00 00 00 [ 32.077038] usb-storage: Bulk Command S 0x43425355 T 0x2d L 0 F 0 Trg 0 LUN 0 CL 6 [ 32.077041] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.077185] usb-storage: Status code 0; transferred 31/31 [ 32.077187] usb-storage: -- transfer complete [ 32.077189] usb-storage: Bulk command transfer result=0 [ 32.077190] usb-storage: Attempting to get CSW... [ 32.077192] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.077384] usb-storage: Status code 0; transferred 13/13 [ 32.077385] usb-storage: -- transfer complete [ 32.077387] usb-storage: Bulk status result = 0 [ 32.077390] usb-storage: Bulk Status S 0x53425355 T 0x2d R 0 Stat 0x1 [ 32.077392] usb-storage: -- transport indicates command failure [ 32.077394] usb-storage: Issuing auto-REQUEST_SENSE [ 32.077397] usb-storage: Bulk Command S 0x43425355 T 0x2e L 18 F 128 Trg 0 LUN 0 CL 6 [ 32.077399] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.077567] usb-storage: Status code 0; transferred 31/31 [ 32.077569] usb-storage: -- transfer complete [ 32.077571] usb-storage: Bulk command transfer result=0 [ 32.077573] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries [ 32.077677] usb-storage: Status code 0; transferred 18/18 [ 32.077679] usb-storage: -- transfer complete [ 32.077681] usb-storage: Bulk data transfer result 0x0 [ 32.077682] usb-storage: Attempting to get CSW... [ 32.077684] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.077807] usb-storage: Status code 0; transferred 13/13 [ 32.077809] usb-storage: -- transfer complete [ 32.077811] usb-storage: Bulk status result = 0 [ 32.077813] usb-storage: Bulk Status S 0x53425355 T 0x2e R 0 Stat 0x0 [ 32.077816] usb-storage: -- Result from auto-sense is 0 [ 32.077818] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 [ 32.077821] usb-storage: Not Ready: Medium not present [ 32.077824] usb-storage: scsi cmd done, result=0x2 [ 32.077827] usb-storage: *** thread sleeping. [ 32.077870] usb-storage: queuecommand called [ 32.077905] usb-storage: *** thread awakened. [ 32.077908] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 32.077909] usb-storage: 00 00 00 00 00 00 [ 32.077915] usb-storage: Bulk Command S 0x43425355 T 0x2f L 0 F 0 Trg 0 LUN 0 CL 6 [ 32.077917] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.078386] usb-storage: Status code 0; transferred 31/31 [ 32.078388] usb-storage: -- transfer complete [ 32.078390] usb-storage: Bulk command transfer result=0 [ 32.078392] usb-storage: Attempting to get CSW... [ 32.078394] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.078565] usb-storage: Status code 0; transferred 13/13 [ 32.078567] usb-storage: -- transfer complete [ 32.078568] usb-storage: Bulk status result = 0 [ 32.078571] usb-storage: Bulk Status S 0x53425355 T 0x2f R 0 Stat 0x1 [ 32.078573] usb-storage: -- transport indicates command failure [ 32.078575] usb-storage: Issuing auto-REQUEST_SENSE [ 32.078578] usb-storage: Bulk Command S 0x43425355 T 0x30 L 18 F 128 Trg 0 LUN 0 CL 6 [ 32.078580] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.078680] usb-storage: Status code 0; transferred 31/31 [ 32.078682] usb-storage: -- transfer complete [ 32.078684] usb-storage: Bulk command transfer result=0 [ 32.078686] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries [ 32.078802] usb-storage: Status code 0; transferred 18/18 [ 32.078803] usb-storage: -- transfer complete [ 32.078805] usb-storage: Bulk data transfer result 0x0 [ 32.078807] usb-storage: Attempting to get CSW... [ 32.078809] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.078926] usb-storage: Status code 0; transferred 13/13 [ 32.078928] usb-storage: -- transfer complete [ 32.078929] usb-storage: Bulk status result = 0 [ 32.078932] usb-storage: Bulk Status S 0x53425355 T 0x30 R 0 Stat 0x0 [ 32.078934] usb-storage: -- Result from auto-sense is 0 [ 32.078936] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 [ 32.078939] usb-storage: Not Ready: Medium not present [ 32.078941] usb-storage: scsi cmd done, result=0x2 [ 32.078944] usb-storage: *** thread sleeping. [ 32.079230] usb-storage: queuecommand called [ 32.079599] usb-storage: *** thread awakened. [ 32.079602] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 32.079603] usb-storage: 00 00 00 00 00 00 [ 32.079609] usb-storage: Bulk Command S 0x43425355 T 0x31 L 0 F 0 Trg 0 LUN 0 CL 6 [ 32.079611] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.079804] usb-storage: Status code 0; transferred 31/31 [ 32.079806] usb-storage: -- transfer complete [ 32.079808] usb-storage: Bulk command transfer result=0 [ 32.079810] usb-storage: Attempting to get CSW... [ 32.079811] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.079926] usb-storage: Status code 0; transferred 13/13 [ 32.079927] usb-storage: -- transfer complete [ 32.079929] usb-storage: Bulk status result = 0 [ 32.079931] usb-storage: Bulk Status S 0x53425355 T 0x31 R 0 Stat 0x1 [ 32.079933] usb-storage: -- transport indicates command failure [ 32.079935] usb-storage: Issuing auto-REQUEST_SENSE [ 32.079938] usb-storage: Bulk Command S 0x43425355 T 0x32 L 18 F 128 Trg 0 LUN 0 CL 6 [ 32.079941] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.080264] usb-storage: Status code 0; transferred 31/31 [ 32.080266] usb-storage: -- transfer complete [ 32.080268] usb-storage: Bulk command transfer result=0 [ 32.080270] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries [ 32.080439] usb-storage: Status code 0; transferred 18/18 [ 32.080441] usb-storage: -- transfer complete [ 32.080443] usb-storage: Bulk data transfer result 0x0 [ 32.080444] usb-storage: Attempting to get CSW... [ 32.080446] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.080569] usb-storage: Status code 0; transferred 13/13 [ 32.080571] usb-storage: -- transfer complete [ 32.080573] usb-storage: Bulk status result = 0 [ 32.080575] usb-storage: Bulk Status S 0x53425355 T 0x32 R 0 Stat 0x0 [ 32.080577] usb-storage: -- Result from auto-sense is 0 [ 32.080579] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 [ 32.080582] usb-storage: Not Ready: Medium not present [ 32.080585] usb-storage: scsi cmd done, result=0x2 [ 32.080587] usb-storage: *** thread sleeping. [ 32.080636] usb-storage: queuecommand called [ 32.080670] usb-storage: *** thread awakened. [ 32.080673] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 32.080674] usb-storage: 00 00 00 00 00 00 [ 32.080680] usb-storage: Bulk Command S 0x43425355 T 0x33 L 0 F 0 Trg 0 LUN 0 CL 6 [ 32.080682] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.080802] usb-storage: Status code 0; transferred 31/31 [ 32.080804] usb-storage: -- transfer complete [ 32.080805] usb-storage: Bulk command transfer result=0 [ 32.080807] usb-storage: Attempting to get CSW... [ 32.080809] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.080925] usb-storage: Status code 0; transferred 13/13 [ 32.080927] usb-storage: -- transfer complete [ 32.080929] usb-storage: Bulk status result = 0 [ 32.080931] usb-storage: Bulk Status S 0x53425355 T 0x33 R 0 Stat 0x1 [ 32.080933] usb-storage: -- transport indicates command failure [ 32.080935] usb-storage: Issuing auto-REQUEST_SENSE [ 32.080938] usb-storage: Bulk Command S 0x43425355 T 0x34 L 18 F 128 Trg 0 LUN 0 CL 6 [ 32.080940] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.081067] usb-storage: Status code 0; transferred 31/31 [ 32.081069] usb-storage: -- transfer complete [ 32.081071] usb-storage: Bulk command transfer result=0 [ 32.081074] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries [ 32.081170] usb-storage: Status code 0; transferred 18/18 [ 32.081172] usb-storage: -- transfer complete [ 32.081175] usb-storage: Bulk data transfer result 0x0 [ 32.081177] usb-storage: Attempting to get CSW... [ 32.081179] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.081322] usb-storage: Status code 0; transferred 13/13 [ 32.081324] usb-storage: -- transfer complete [ 32.081326] usb-storage: Bulk status result = 0 [ 32.081328] usb-storage: Bulk Status S 0x53425355 T 0x34 R 0 Stat 0x0 [ 32.081330] usb-storage: -- Result from auto-sense is 0 [ 32.081332] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 [ 32.081335] usb-storage: Not Ready: Medium not present [ 32.081338] usb-storage: scsi cmd done, result=0x2 [ 32.081341] usb-storage: *** thread sleeping. [ 32.081538] usb-storage: queuecommand called [ 32.081559] usb-storage: *** thread awakened. [ 32.081562] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 32.081563] usb-storage: 00 00 00 00 00 00 [ 32.081569] usb-storage: Bulk Command S 0x43425355 T 0x35 L 0 F 0 Trg 0 LUN 0 CL 6 [ 32.081571] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.081679] usb-storage: Status code 0; transferred 31/31 [ 32.081681] usb-storage: -- transfer complete [ 32.081683] usb-storage: Bulk command transfer result=0 [ 32.081685] usb-storage: Attempting to get CSW... [ 32.081686] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.081805] usb-storage: Status code 0; transferred 13/13 [ 32.081807] usb-storage: -- transfer complete [ 32.081808] usb-storage: Bulk status result = 0 [ 32.081811] usb-storage: Bulk Status S 0x53425355 T 0x35 R 0 Stat 0x1 [ 32.081813] usb-storage: -- transport indicates command failure [ 32.081814] usb-storage: Issuing auto-REQUEST_SENSE [ 32.081818] usb-storage: Bulk Command S 0x43425355 T 0x36 L 18 F 128 Trg 0 LUN 0 CL 6 [ 32.081820] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.081926] usb-storage: Status code 0; transferred 31/31 [ 32.081927] usb-storage: -- transfer complete [ 32.081929] usb-storage: Bulk command transfer result=0 [ 32.081931] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries [ 32.082063] usb-storage: Status code 0; transferred 18/18 [ 32.082065] usb-storage: -- transfer complete [ 32.082067] usb-storage: Bulk data transfer result 0x0 [ 32.082070] usb-storage: Attempting to get CSW... [ 32.082072] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.082169] usb-storage: Status code 0; transferred 13/13 [ 32.082171] usb-storage: -- transfer complete [ 32.082173] usb-storage: Bulk status result = 0 [ 32.082176] usb-storage: Bulk Status S 0x53425355 T 0x36 R 0 Stat 0x0 [ 32.082178] usb-storage: -- Result from auto-sense is 0 [ 32.082180] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 [ 32.082183] usb-storage: Not Ready: Medium not present [ 32.082185] usb-storage: scsi cmd done, result=0x2 [ 32.082191] usb-storage: *** thread sleeping. [ 32.082406] usb-storage: queuecommand called [ 32.082439] usb-storage: *** thread awakened. [ 32.082442] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 32.082443] usb-storage: 00 00 00 00 00 00 [ 32.082449] usb-storage: Bulk Command S 0x43425355 T 0x37 L 0 F 0 Trg 0 LUN 0 CL 6 [ 32.082451] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.082550] usb-storage: Status code 0; transferred 31/31 [ 32.082552] usb-storage: -- transfer complete [ 32.082554] usb-storage: Bulk command transfer result=0 [ 32.082556] usb-storage: Attempting to get CSW... [ 32.082557] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.082682] usb-storage: Status code 0; transferred 13/13 [ 32.082684] usb-storage: -- transfer complete [ 32.082686] usb-storage: Bulk status result = 0 [ 32.082688] usb-storage: Bulk Status S 0x53425355 T 0x37 R 0 Stat 0x1 [ 32.082690] usb-storage: -- transport indicates command failure [ 32.082692] usb-storage: Issuing auto-REQUEST_SENSE [ 32.082695] usb-storage: Bulk Command S 0x43425355 T 0x38 L 18 F 128 Trg 0 LUN 0 CL 6 [ 32.082697] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.082803] usb-storage: Status code 0; transferred 31/31 [ 32.082805] usb-storage: -- transfer complete [ 32.082806] usb-storage: Bulk command transfer result=0 [ 32.082809] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries [ 32.082926] usb-storage: Status code 0; transferred 18/18 [ 32.082928] usb-storage: -- transfer complete [ 32.082930] usb-storage: Bulk data transfer result 0x0 [ 32.082931] usb-storage: Attempting to get CSW... [ 32.082933] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.083062] usb-storage: Status code 0; transferred 13/13 [ 32.083064] usb-storage: -- transfer complete [ 32.083066] usb-storage: Bulk status result = 0 [ 32.083069] usb-storage: Bulk Status S 0x53425355 T 0x38 R 0 Stat 0x0 [ 32.083071] usb-storage: -- Result from auto-sense is 0 [ 32.083074] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 [ 32.083077] usb-storage: Not Ready: Medium not present [ 32.083081] usb-storage: scsi cmd done, result=0x2 [ 32.083084] usb-storage: *** thread sleeping. [ 32.117861] usb-storage: queuecommand called [ 32.117869] usb-storage: *** thread awakened. [ 32.117871] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 32.117873] usb-storage: 00 00 00 00 00 00 [ 32.117879] usb-storage: Bulk Command S 0x43425355 T 0x39 L 0 F 0 Trg 0 LUN 0 CL 6 [ 32.117882] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.118062] usb-storage: Status code 0; transferred 31/31 [ 32.118064] usb-storage: -- transfer complete [ 32.118066] usb-storage: Bulk command transfer result=0 [ 32.118068] usb-storage: Attempting to get CSW... [ 32.118070] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.118177] usb-storage: Status code 0; transferred 13/13 [ 32.118179] usb-storage: -- transfer complete [ 32.118180] usb-storage: Bulk status result = 0 [ 32.118183] usb-storage: Bulk Status S 0x53425355 T 0x39 R 0 Stat 0x1 [ 32.118185] usb-storage: -- transport indicates command failure [ 32.118187] usb-storage: Issuing auto-REQUEST_SENSE [ 32.118190] usb-storage: Bulk Command S 0x43425355 T 0x3a L 18 F 128 Trg 0 LUN 0 CL 6 [ 32.118193] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.118486] usb-storage: Status code 0; transferred 31/31 [ 32.118488] usb-storage: -- transfer complete [ 32.118490] usb-storage: Bulk command transfer result=0 [ 32.118492] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries [ 32.118698] usb-storage: Status code 0; transferred 18/18 [ 32.118700] usb-storage: -- transfer complete [ 32.118701] usb-storage: Bulk data transfer result 0x0 [ 32.118703] usb-storage: Attempting to get CSW... [ 32.118705] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.118803] usb-storage: Status code 0; transferred 13/13 [ 32.118805] usb-storage: -- transfer complete [ 32.118806] usb-storage: Bulk status result = 0 [ 32.118809] usb-storage: Bulk Status S 0x53425355 T 0x3a R 0 Stat 0x0 [ 32.118811] usb-storage: -- Result from auto-sense is 0 [ 32.118813] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 [ 32.118817] usb-storage: Not Ready: Medium not present [ 32.118820] usb-storage: scsi cmd done, result=0x2 [ 32.118823] usb-storage: *** thread sleeping. [ 32.118841] usb-storage: queuecommand called [ 32.118845] usb-storage: *** thread awakened. [ 32.118847] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 32.118849] usb-storage: 00 00 00 00 00 00 [ 32.118854] usb-storage: Bulk Command S 0x43425355 T 0x3b L 0 F 0 Trg 0 LUN 0 CL 6 [ 32.118857] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.118928] usb-storage: Status code 0; transferred 31/31 [ 32.118930] usb-storage: -- transfer complete [ 32.118932] usb-storage: Bulk command transfer result=0 [ 32.118934] usb-storage: Attempting to get CSW... [ 32.118935] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.119061] usb-storage: Status code 0; transferred 13/13 [ 32.119062] usb-storage: -- transfer complete [ 32.119064] usb-storage: Bulk status result = 0 [ 32.119066] usb-storage: Bulk Status S 0x53425355 T 0x3b R 0 Stat 0x1 [ 32.119068] usb-storage: -- transport indicates command failure [ 32.119070] usb-storage: Issuing auto-REQUEST_SENSE [ 32.119073] usb-storage: Bulk Command S 0x43425355 T 0x3c L 18 F 128 Trg 0 LUN 0 CL 6 [ 32.119076] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 32.119198] usb-storage: Status code 0; transferred 31/31 [ 32.119200] usb-storage: -- transfer complete [ 32.119202] usb-storage: Bulk command transfer result=0 [ 32.119204] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries [ 32.119574] usb-storage: Status code 0; transferred 18/18 [ 32.119576] usb-storage: -- transfer complete [ 32.119578] usb-storage: Bulk data transfer result 0x0 [ 32.119579] usb-storage: Attempting to get CSW... [ 32.119581] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 32.119670] usb-storage: Status code 0; transferred 13/13 [ 32.119672] usb-storage: -- transfer complete [ 32.119674] usb-storage: Bulk status result = 0 [ 32.119676] usb-storage: Bulk Status S 0x53425355 T 0x3c R 0 Stat 0x0 [ 32.119678] usb-storage: -- Result from auto-sense is 0 [ 32.119680] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 [ 32.119683] usb-storage: Not Ready: Medium not present [ 32.119686] usb-storage: scsi cmd done, result=0x2 [ 32.119689] usb-storage: *** thread sleeping. -- Dirk Hohndel Intel Open Source Technology Center -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
