Re: strange USB storage failure with 2.6.29-rc2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 23 Jan 2009 15:18:58 -0800
Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx> wrote:

> On Fri, Jan 23, 2009 at 02:29:03PM -0800, Dirk Hohndel wrote:
> > 
> > Note this is completely unrelated from my previous email - different
> > hardware, different issue.
> > 
> > This is on a Thinkpad X200s. With 2.6.29-rc2 I can no longer access USB
> > sticks. Other USB storage still works (e.g., a SATA drive connected via
> > USB/SATA adapter).
> > 
> > Kernel messages look sane:
> > 
> > Jan 22 13:49:48 dhohndel-mobl4 kernel: [   41.182104] usb 1-1: new high speed USB device using ehci_hcd and address 4
> > Jan 22 13:49:48 dhohndel-mobl4 kernel: [   41.297199] usb 1-1: New USB device found, idVendor=0204, idProduct=6025
> > Jan 22 13:49:48 dhohndel-mobl4 kernel: [   41.297376] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> > Jan 22 13:49:48 dhohndel-mobl4 kernel: [   41.297532] usb 1-1: Product: Flash Disk
> > Jan 22 13:49:48 dhohndel-mobl4 kernel: [   41.297666] usb 1-1: Manufacturer: USB
> > Jan 22 13:49:48 dhohndel-mobl4 kernel: [   41.297801] usb 1-1: SerialNumber: F08060500572
> > Jan 22 13:49:48 dhohndel-mobl4 kernel: [   41.299038] usb 1-1: configuration #1 chosen from 1 choice
> > Jan 22 13:49:48 dhohndel-mobl4 kernel: [   41.315924] scsi4 : SCSI emulation for USB Mass Storage devices
> > Jan 22 13:49:53 dhohndel-mobl4 kernel: [   46.317046] scsi 4:0:0:0: Direct-Access     USB      Flash Disk       5.00 PQ: 0 ANSI: 2
> > Jan 22 13:49:53 dhohndel-mobl4 kernel: [   46.319676] sd 4:0:0:0: [sdb] 4109312 512-byte hardware sectors: (2.10 GB/1.95 GiB)
> > Jan 22 13:49:53 dhohndel-mobl4 kernel: [   46.320617] sd 4:0:0:0: [sdb] Write Protect is off
> > Jan 22 13:49:53 dhohndel-mobl4 kernel: [   46.320764] sd 4:0:0:0: [sdb] Assuming drive cache: write through
> > Jan 22 13:49:53 dhohndel-mobl4 kernel: [   46.323999] sd 4:0:0:0: [sdb] 4109312 512-byte hardware sectors: (2.10 GB/1.95 GiB)
> > Jan 22 13:49:53 dhohndel-mobl4 kernel: [   46.325121] sd 4:0:0:0: [sdb] Write Protect is off
> > Jan 22 13:49:53 dhohndel-mobl4 kernel: [   46.325279] sd 4:0:0:0: [sdb] Assuming drive cache: write through
> > Jan 22 13:49:53 dhohndel-mobl4 kernel: [   46.325909]  sdb:<7>usb-storage: queuecommand called
> > Jan 22 13:49:53 dhohndel-mobl4 kernel: [   46.326963]  sdb1
> > Jan 22 13:49:53 dhohndel-mobl4 kernel: [   46.329437] sd 4:0:0:0: [sdb] Attached SCSI removable disk
> > Jan 22 13:49:53 dhohndel-mobl4 kernel: [   46.330022] sd 4:0:0:0: Attached scsi generic sg1 type 0
> 
> I looked at Dirk's output yesterday.  Dirk, there wasn't any output for sdb
> after this point, correct?  So it looked like to me like the USB MSD driver's
> queue command function was never returning.

That's correct. Nothing after that.

/D
-- 
Dirk Hohndel
Intel Open Source Technology Center
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux