On Wed, Jun 29, 2016 at 06:23:50PM -0700, Stephen Boyd wrote: > Quoting Peter Chen (2016-06-28 19:30:52) > > On Sun, Jun 26, 2016 at 12:28:23AM -0700, Stephen Boyd wrote: > > > The ULPI phy on qcom platforms needs to be initialized and > > > powered on after a USB reset and before we toggle the run/stop > > > bit. Otherwise, the phy locks up and doesn't work properly. > > > > This requirement is so strange, try to see if any other initialization > > sequences. > > I think the problem is that the reset bit also resets the phy because > the phy is part of the same clock domain as the controller. Just a guess > though. > > > > > Since this driver is multi-platforms, I can't accept this change for > > common, if you had to do that, would you please move your changes to > > msm glue layer using CI_HDRC_CONTROLLER_RESET_EVENT and > > CI_HDRC_CONTROLLER_STOPPED_EVENT? Besides, you need to add one flag > > at ci_hdrc_platform_data.flags for your case to avoid normal > > initialization. > > Ok, let me see if I can make this work properly in the glue layer. I > take it that you want me to add a flag for this specific case so that we > don't do any phy control in the core and leave it up to the glue layer > to handle, like CI_HDRC_DISABLE_PHY_CONTROL or something? Yes -- Best Regards, Peter Chen -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
