The ULPI phy on qcom platforms needs to be initialized and
powered on after a USB reset and before we toggle the run/stop
bit. Otherwise, the phy locks up and doesn't work properly. Move
the phy initialization to a later point, and shut it down outside
of driver remove so that the phy state is properly managed across
role switches.
Cc: Peter Chen <peter.chen@xxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Stephen Boyd <stephen.boyd@xxxxxxxxxx>
---
drivers/usb/chipidea/ci.h | 3 ++-
drivers/usb/chipidea/core.c | 23 ++++++++++-------------
drivers/usb/chipidea/host.c | 5 ++---
drivers/usb/chipidea/udc.c | 2 ++
4 files changed, 16 insertions(+), 17 deletions(-)
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index cd414559040f..f87805235caa 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -431,7 +431,8 @@ u8 hw_port_test_get(struct ci_hdrc *ci);
int hw_wait_reg(struct ci_hdrc *ci, enum ci_hw_regs reg, u32 mask,
u32 value, unsigned int timeout_ms);
-void ci_platform_configure(struct ci_hdrc *ci);
+void ci_usb_phy_exit(struct ci_hdrc *ci);
+int ci_platform_configure(struct ci_hdrc *ci);
int dbg_create_files(struct ci_hdrc *ci);
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 01390e02ee53..a01611c7f815 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -359,7 +359,7 @@ static int _ci_usb_phy_init(struct ci_hdrc *ci)
* interfaces
* @ci: the controller
*/
-static void ci_usb_phy_exit(struct ci_hdrc *ci)
+void ci_usb_phy_exit(struct ci_hdrc *ci)
{
if (ci->phy) {
phy_power_off(ci->phy);
@@ -412,9 +412,14 @@ static int ci_usb_phy_init(struct ci_hdrc *ci)
* @ci: the controller
*
*/
-void ci_platform_configure(struct ci_hdrc *ci)
+int ci_platform_configure(struct ci_hdrc *ci)
{
bool is_device_mode, is_host_mode;
+ int ret;
+
+ ret = ci_usb_phy_init(ci);
+ if (ret)
+ return ret;
is_device_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_DC;
is_host_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_HC;
@@ -453,6 +458,8 @@ void ci_platform_configure(struct ci_hdrc *ci)
hw_write(ci, OP_BURSTSIZE, RX_BURST_MASK,
ci->platdata->rx_burst_size);
}
+
+ return 0;
}
/**
@@ -511,9 +518,7 @@ int hw_device_reset(struct ci_hdrc *ci)
return -ENODEV;
}
- ci_platform_configure(ci);
-
- return 0;
+ return ci_platform_configure(ci);
}
static irqreturn_t ci_irq(int irq, void *data)
@@ -917,12 +922,6 @@ static int ci_hdrc_probe(struct platform_device *pdev)
ci->usb_phy = NULL;
}
- ret = ci_usb_phy_init(ci);
- if (ret) {
- dev_err(dev, "unable to init phy: %d\n", ret);
- return ret;
- }
-
ci->hw_bank.phys = res->start;
ci->irq = platform_get_irq(pdev, 0);
@@ -1025,7 +1024,6 @@ static int ci_hdrc_probe(struct platform_device *pdev)
stop:
ci_role_destroy(ci);
deinit_phy:
- ci_usb_phy_exit(ci);
return ret;
}
@@ -1044,7 +1042,6 @@ static int ci_hdrc_remove(struct platform_device *pdev)
ci_extcon_unregister(ci);
ci_role_destroy(ci);
ci_hdrc_enter_lpm(ci, true);
- ci_usb_phy_exit(ci);
return 0;
}
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 053bac9d983c..523c155daea8 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -87,9 +87,7 @@ static int ehci_ci_reset(struct usb_hcd *hcd)
if (ret)
return ret;
- ci_platform_configure(ci);
-
- return ret;
+ return ci_platform_configure(ci);
}
static const struct ehci_driver_overrides ehci_ci_overrides = {
@@ -186,6 +184,7 @@ static void host_stop(struct ci_hdrc *ci)
if (hcd) {
usb_remove_hcd(hcd);
usb_put_hcd(hcd);
+ ci_usb_phy_exit(ci);
if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) &&
(ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON))
regulator_disable(ci->platdata->reg_vbus);
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 065f5d97aa67..8f44e2d1e0c0 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1534,6 +1534,7 @@ static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
if (ci->driver)
ci->driver->disconnect(&ci->gadget);
hw_device_state(ci, 0);
+ ci_usb_phy_exit(ci);
if (ci->platdata->notify_event)
ci->platdata->notify_event(ci,
CI_HDRC_CONTROLLER_STOPPED_EVENT);
@@ -1794,6 +1795,7 @@ static int ci_udc_stop(struct usb_gadget *gadget)
ci->platdata->notify_event(ci,
CI_HDRC_CONTROLLER_STOPPED_EVENT);
spin_unlock_irqrestore(&ci->lock, flags);
+ ci_usb_phy_exit(ci);
_gadget_stop_activity(&ci->gadget);
spin_lock_irqsave(&ci->lock, flags);
pm_runtime_put(&ci->gadget.dev);
--
2.9.0.rc2.8.ga28705d
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
