Hi Heiko,
On 06/02/2016 07:46 AM, Heiko Stübner wrote:
Hi Frank,
Am Dienstag, 31. Mai 2016, 14:40:11 schrieb Frank Wang:
The newer SoCs (rk3366, rk3399) take a different usb-phy IP block
than rk3288 and before, and most of phy-related registers are also
different from the past, so a new phy driver is required necessarily.
Signed-off-by: Frank Wang <frank.wang@xxxxxxxxxxxxxx>
---
[...]
+static void rockchip_usb2phy_clk480m_disable(struct clk_hw *hw)
+{
+ struct rockchip_usb2phy *rphy =
+ container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+ int index;
+
+ /* make sure all ports in suspended mode */
+ for (index = 0; index != rphy->phy_cfg->num_ports; index++)
+ if (!rphy->ports[index].suspended)
+ return;
This function can only get called when all clk-references have disabled the
clock, so you should never reach that point that one phy port is not
suspended?
Yeah, you are right, I will clean them up in the next patches.
+
+ /* turn off 480m clk output */
+ property_enable(rphy, &rphy->phy_cfg->clkout_ctl, false);
+}
+
[...]
add something like:
static void rockchip_usb2phy_clk480m_unregister(void *data)
{
struct rockchip_usb2phy *rphy = data;
of_clk_del_provider(rphy->dev->of_node);
clk_unregister(rphy->clk480m);
}
+static struct clk *
+rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy)
+{
+ struct device_node *node = rphy->dev->of_node;
+ struct clk *clk;
+ struct clk_init_data init;
int ret;
+
+ init.name = "clk_usbphy_480m";
+ init.ops = &rockchip_usb2phy_clkout_ops;
+ init.flags = CLK_IS_ROOT;
+ init.parent_names = NULL;
+ init.num_parents = 0;
+ rphy->clk480m_hw.init = &init;
+
+ /* optional override of the clockname */
+ of_property_read_string(node, "clock-output-names", &init.name);
+
+ /* register the clock */
+ clk = clk_register(rphy->dev, &rphy->clk480m_hw);
if (IS_ERR(clk))
return clk:
ret = of_clk_add_provider(node, of_clk_src_simple_get, clk);
if (ret < 0)
goto err_clk_provider;
ret = devm_add_action(rphy->dev, rockchip_usb2phy_clk480m_unregister,
rphy);
if (ret < 0)
goto err_unreg_action;
return clk;
err_unreg_action:
of_clk_del_provider(node);
err_clk_provider:
clk_unregister(clk);
return ERR_PTR(ret);
+}
Good comments! Those codes will be included in the next.
[...]
+/*
+ * The function manage host-phy port state and suspend/resume phy port
+ * to save power.
+ *
+ * we rely on utmi_linestate and utmi_hostdisconnect to identify whether
+ * FS/HS is disconnect or not. Besides, we do not need care it is FS
+ * disconnected or HS disconnected, actually, we just only need get the
+ * device is disconnected at last through rearm the delayed work,
+ * to suspend the phy port in _PHY_STATE_DISCONNECT_ case.
+ *
+ * NOTE: It will invoke some clk related APIs, so do not invoke it from
+ * interrupt context.
This does not seem to match the code, as I don't see any clk_* calls,
Sorry for not describing the comment clearly. In a fact, *_sm_work will
invoke *phy_suspend or *phy_resume which will invoke some *clk APIs.
Anyway, I will correct it to be more clear.
+ */
+static void rockchip_usb2phy_sm_work(struct work_struct *work)
+{
>> +
[...]
>> +
+ /* fall through */
+ case PHY_STATE_HS_CONNECT:
+ if (rport->suspended) {
+ dev_dbg(&rport->phy->dev, "HS/FS connected\n");
+ rockchip_usb2phy_resume(rport->phy);
+ rport->suspended = false;
+ }
+ break;
+ case PHY_STATE_DISCONNECT:
+ if (!rport->suspended) {
+ dev_dbg(&rport->phy->dev, "HS/FS disconnected\n");
+ rockchip_usb2phy_suspend(rport->phy);
+ rport->suspended = true;
+ }
[...]
>> +
+ }
+
+next_schedule:
+ mutex_unlock(&rport->mutex);
+ schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
+}
[...]
+static int rockchip_usb2phy_probe(struct platform_device *pdev)
+{
>> +
>> [...]
>> +
+
+ provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(provider);
+
+put_child:
+ of_node_put(child_np);
+ of_clk_del_provider(np);
+ clk_unregister(rphy->clk480m);
these two can go away, once you have the devm_action described
near your clk_register function.
Done
+ return ret;
+}
BR.
Frank
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
