Hi Frank,
Am Dienstag, 31. Mai 2016, 14:40:11 schrieb Frank Wang:
> The newer SoCs (rk3366, rk3399) take a different usb-phy IP block
> than rk3288 and before, and most of phy-related registers are also
> different from the past, so a new phy driver is required necessarily.
>
> Signed-off-by: Frank Wang <frank.wang@xxxxxxxxxxxxxx>
> ---
[...]
> +static void rockchip_usb2phy_clk480m_disable(struct clk_hw *hw)
> +{
> + struct rockchip_usb2phy *rphy =
> + container_of(hw, struct rockchip_usb2phy, clk480m_hw);
> + int index;
> +
> + /* make sure all ports in suspended mode */
> + for (index = 0; index != rphy->phy_cfg->num_ports; index++)
> + if (!rphy->ports[index].suspended)
> + return;
This function can only get called when all clk-references have disabled the
clock, so you should never reach that point that one phy port is not
suspended?
> +
> + /* turn off 480m clk output */
> + property_enable(rphy, &rphy->phy_cfg->clkout_ctl, false);
> +}
> +
[...]
add something like:
static void rockchip_usb2phy_clk480m_unregister(void *data)
{
struct rockchip_usb2phy *rphy = data;
of_clk_del_provider(rphy->dev->of_node);
clk_unregister(rphy->clk480m);
}
> +static struct clk *
> +rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy)
> +{
> + struct device_node *node = rphy->dev->of_node;
> + struct clk *clk;
> + struct clk_init_data init;
int ret;
> +
> + init.name = "clk_usbphy_480m";
> + init.ops = &rockchip_usb2phy_clkout_ops;
> + init.flags = CLK_IS_ROOT;
> + init.parent_names = NULL;
> + init.num_parents = 0;
> + rphy->clk480m_hw.init = &init;
> +
> + /* optional override of the clockname */
> + of_property_read_string(node, "clock-output-names", &init.name);
> +
> + /* register the clock */
> + clk = clk_register(rphy->dev, &rphy->clk480m_hw);
if (IS_ERR(clk))
return clk:
ret = of_clk_add_provider(node, of_clk_src_simple_get, clk);
if (ret < 0)
goto err_clk_provider;
ret = devm_add_action(rphy->dev, rockchip_usb2phy_clk480m_unregister,
rphy);
if (ret < 0)
goto err_unreg_action;
return clk;
err_unreg_action:
of_clk_del_provider(node);
err_clk_provider:
clk_unregister(clk);
return ERR_PTR(ret);
> +}
[...]
> +/*
> + * The function manage host-phy port state and suspend/resume phy port
> + * to save power.
> + *
> + * we rely on utmi_linestate and utmi_hostdisconnect to identify whether
> + * FS/HS is disconnect or not. Besides, we do not need care it is FS
> + * disconnected or HS disconnected, actually, we just only need get the
> + * device is disconnected at last through rearm the delayed work,
> + * to suspend the phy port in _PHY_STATE_DISCONNECT_ case.
> + *
> + * NOTE: It will invoke some clk related APIs, so do not invoke it from
> + * interrupt context.
This does not seem to match the code, as I don't see any clk_* calls,
> + */
> +static void rockchip_usb2phy_sm_work(struct work_struct *work)
> +{
> + struct rockchip_usb2phy_port *rport =
> + container_of(work, struct rockchip_usb2phy_port, sm_work.work);
> + struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
> + unsigned int sh = rport->port_cfg->utmi_hstdet.bitend -
> + rport->port_cfg->utmi_hstdet.bitstart + 1;
> + unsigned int ul, uhd, state;
> + unsigned int ul_mask, uhd_mask;
> + int ret;
> +
> + mutex_lock(&rport->mutex);
> +
> + ret = regmap_read(rphy->grf, rport->port_cfg->utmi_ls.offset, &ul);
> + if (ret < 0)
> + goto next_schedule;
> +
> + ret = regmap_read(rphy->grf, rport->port_cfg->utmi_hstdet.offset,
> + &uhd);
> + if (ret < 0)
> + goto next_schedule;
> +
> + uhd_mask = GENMASK(rport->port_cfg->utmi_hstdet.bitend,
> + rport->port_cfg->utmi_hstdet.bitstart);
> + ul_mask = GENMASK(rport->port_cfg->utmi_ls.bitend,
> + rport->port_cfg->utmi_ls.bitstart);
> +
> + /* stitch on utmi_ls and utmi_hstdet as phy state */
> + state = ((uhd & uhd_mask) >> rport->port_cfg->utmi_hstdet.bitstart) |
> + (((ul & ul_mask) >> rport->port_cfg->utmi_ls.bitstart) << sh);
> +
> + switch (state) {
> + case PHY_STATE_HS_ONLINE:
> + dev_dbg(&rport->phy->dev, "HS online\n");
> + break;
> + case PHY_STATE_FS_CONNECT:
> + /*
> + * For FS device, the online state share with connect state
> + * from utmi_ls and utmi_hstdet register, so we distinguish
> + * them via suspended flag.
> + */
> + if (!rport->suspended) {
> + dev_dbg(&rport->phy->dev, "FS online\n");
> + break;
> + }
> + /* fall through */
> + case PHY_STATE_HS_CONNECT:
> + if (rport->suspended) {
> + dev_dbg(&rport->phy->dev, "HS/FS connected\n");
> + rockchip_usb2phy_resume(rport->phy);
> + rport->suspended = false;
> + }
> + break;
> + case PHY_STATE_DISCONNECT:
> + if (!rport->suspended) {
> + dev_dbg(&rport->phy->dev, "HS/FS disconnected\n");
> + rockchip_usb2phy_suspend(rport->phy);
> + rport->suspended = true;
> + }
> +
> + /*
> + * activate the linestate detection to get the next device
> + * plug-in irq.
> + */
> + property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
> + property_enable(rphy, &rport->port_cfg->ls_det_en, true);
> +
> + /*
> + * we don't need to rearm the delayed work when the phy port
> + * is suspended.
> + */
> + mutex_unlock(&rport->mutex);
> + return;
> + default:
> + dev_dbg(&rport->phy->dev, "unknown phy state\n");
> + break;
> + }
> +
> +next_schedule:
> + mutex_unlock(&rport->mutex);
> + schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
> +}
[...]
> +static int rockchip_usb2phy_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *np = dev->of_node;
> + struct device_node *child_np;
> + struct phy_provider *provider;
> + struct rockchip_usb2phy *rphy;
> + const struct of_device_id *match;
> + int index, ret;
> +
> + rphy = devm_kzalloc(dev, sizeof(*rphy), GFP_KERNEL);
> + if (!rphy)
> + return -ENOMEM;
> +
> + match = of_match_device(dev->driver->of_match_table, dev);
> + if (!match || !match->data) {
> + dev_err(dev, "phy configs are not assigned!\n");
> + return -EINVAL;
> + }
> +
> + if (!dev->parent || !dev->parent->of_node)
> + return -ENOMEM;
> +
> + rphy->grf = syscon_node_to_regmap(dev->parent->of_node);
> + if (IS_ERR(rphy->grf))
> + return PTR_ERR(rphy->grf);
> +
> + rphy->dev = dev;
> + rphy->phy_cfg = match->data;
> + platform_set_drvdata(pdev, rphy);
> +
> + rphy->clk480m = rockchip_usb2phy_clk480m_register(rphy);
> + if (IS_ERR(rphy->clk480m))
> + return PTR_ERR(rphy->clk480m);
> +
> + rphy->vbus_host_gpio =
> + devm_gpiod_get_optional(dev, "vbus_host", GPIOD_OUT_HIGH);
> + if (!rphy->vbus_host_gpio)
> + dev_info(dev, "host_vbus is not assigned!\n");
> + else if (IS_ERR(rphy->vbus_host_gpio))
> + return PTR_ERR(rphy->vbus_host_gpio);
> +
> + index = 0;
> + for_each_child_of_node(np, child_np) {
> + struct rockchip_usb2phy_port *rport = &rphy->ports[index];
> + struct phy *phy;
> +
> + phy = devm_phy_create(dev, child_np, &rockchip_usb2phy_ops);
> + if (IS_ERR(phy)) {
> + dev_err(dev, "failed to create phy\n");
> + ret = PTR_ERR(phy);
> + goto put_child;
> + }
> +
> + rport->phy = phy;
> + rport->port_cfg = &rphy->phy_cfg->port_cfgs[index];
> +
> + /* initialize otg/host port separately */
> + if (!of_node_cmp(child_np->name, "host-port")) {
> + ret = rockchip_usb2phy_host_port_init(rphy, rport,
> + child_np);
> + if (ret)
> + goto put_child;
> + }
> +
> + phy_set_drvdata(rport->phy, rport);
> + index++;
> + }
> +
> + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> + return PTR_ERR_OR_ZERO(provider);
> +
> +put_child:
> + of_node_put(child_np);
> + of_clk_del_provider(np);
> + clk_unregister(rphy->clk480m);
these two can go away, once you have the devm_action described
near your clk_register function.
> + return ret;
> +}
Heiko
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
