From: Tang, Jianqiang <jianqiang.tang@xxxxxxxxx> There will be a data toggle error for full speed bulk-out transfers. The data toggle bit is saved in the qh for non-control transfers, it is wrong to check the qtd in that case. John Youn: * Added WARN() to warn on improper usage of the dwc2_hcd_save_data_toggle() function. Tested-by: Gregory Herrero <gregory.herrero@xxxxxxxxx> Signed-off-by: Dyson Lee <dyson.lee@xxxxxxxxx> Signed-off-by: Tang, Jianqiang <jianqiang.tang@xxxxxxxxx> Signed-off-by: John Youn <johnyoun@xxxxxxxxxxxx> --- drivers/usb/dwc2/hcd_ddma.c | 2 +- drivers/usb/dwc2/hcd_intr.c | 8 ++++++++ 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc2/hcd_ddma.c b/drivers/usb/dwc2/hcd_ddma.c index 89db47a..a41274a 100644 --- a/drivers/usb/dwc2/hcd_ddma.c +++ b/drivers/usb/dwc2/hcd_ddma.c @@ -1257,7 +1257,7 @@ stop_scan: */ if (halt_status == DWC2_HC_XFER_STALL) qh->data_toggle = DWC2_HC_PID_DATA0; - else if (qtd) + else dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd); } diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index f825380..cadba8b 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -525,11 +525,19 @@ void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg, u32 pid = (hctsiz & TSIZ_SC_MC_PID_MASK) >> TSIZ_SC_MC_PID_SHIFT; if (chan->ep_type != USB_ENDPOINT_XFER_CONTROL) { + if (WARN(!chan || !chan->qh, + "chan->qh must be specified for non-control eps\n")) + return; + if (pid == TSIZ_SC_MC_PID_DATA0) chan->qh->data_toggle = DWC2_HC_PID_DATA0; else chan->qh->data_toggle = DWC2_HC_PID_DATA1; } else { + if (WARN(!qtd, + "qtd must be specified for control eps\n")) + return; + if (pid == TSIZ_SC_MC_PID_DATA0) qtd->data_toggle = DWC2_HC_PID_DATA0; else -- 2.6.3 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html