This avoids a harmless randconfig warning I get when USB_NET_CDC_SUBSET is enabled, but all of the more specific drivers are not: drivers/net/usb/cdc_subset.c:241:2: #warning You need to configure some hardware for this driver The current behavior is clearly intentional, giving a warning when a user picks a configuration that won't do anything good. The only reason for even addressing this is that I'm getting close to eliminating all 'randconfig' warnings on ARM, and this came up a couple of times. My workaround is to not even build the module when none of the configurations are enable. Alternatively we could simply remove the #warning (nothing wrong for compile-testing), turn it into a runtime warning, or change the Kconfig options into a menu to hide CONFIG_USB_NET_CDC_SUBSET. Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx> --- drivers/net/usb/Kconfig | 10 ++++++++++ drivers/net/usb/Makefile | 2 +- 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 7f83504dfa69..cdde59089f72 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -395,6 +395,10 @@ config USB_NET_RNDIS_HOST The protocol specification is incomplete, and is controlled by (and for) Microsoft; it isn't an "Open" ecosystem or market. +config USB_NET_CDC_SUBSET_ENABLE + tristate + depends on USB_NET_CDC_SUBSET + config USB_NET_CDC_SUBSET tristate "Simple USB Network Links (CDC Ethernet subset)" depends on USB_USBNET @@ -413,6 +417,7 @@ config USB_NET_CDC_SUBSET config USB_ALI_M5632 bool "ALi M5632 based 'USB 2.0 Data Link' cables" depends on USB_NET_CDC_SUBSET + select USB_NET_CDC_SUBSET_ENABLE help Choose this option if you're using a host-to-host cable based on this design, which supports USB 2.0 high speed. @@ -420,6 +425,7 @@ config USB_ALI_M5632 config USB_AN2720 bool "AnchorChips 2720 based cables (Xircom PGUNET, ...)" depends on USB_NET_CDC_SUBSET + select USB_NET_CDC_SUBSET_ENABLE help Choose this option if you're using a host-to-host cable based on this design. Note that AnchorChips is now a @@ -428,6 +434,7 @@ config USB_AN2720 config USB_BELKIN bool "eTEK based host-to-host cables (Advance, Belkin, ...)" depends on USB_NET_CDC_SUBSET + select USB_NET_CDC_SUBSET_ENABLE default y help Choose this option if you're using a host-to-host cable @@ -437,6 +444,7 @@ config USB_BELKIN config USB_ARMLINUX bool "Embedded ARM Linux links (iPaq, ...)" depends on USB_NET_CDC_SUBSET + select USB_NET_CDC_SUBSET_ENABLE default y help Choose this option to support the "usb-eth" networking driver @@ -454,6 +462,7 @@ config USB_ARMLINUX config USB_EPSON2888 bool "Epson 2888 based firmware (DEVELOPMENT)" depends on USB_NET_CDC_SUBSET + select USB_NET_CDC_SUBSET_ENABLE help Choose this option to support the usb networking links used by some sample firmware from Epson. @@ -461,6 +470,7 @@ config USB_EPSON2888 config USB_KC2190 bool "KT Technology KC2190 based cables (InstaNet)" depends on USB_NET_CDC_SUBSET + select USB_NET_CDC_SUBSET_ENABLE help Choose this option if you're using a host-to-host cable with one of these chips. diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index b5f04068dbe4..37fb46aee341 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -23,7 +23,7 @@ obj-$(CONFIG_USB_NET_GL620A) += gl620a.o obj-$(CONFIG_USB_NET_NET1080) += net1080.o obj-$(CONFIG_USB_NET_PLUSB) += plusb.o obj-$(CONFIG_USB_NET_RNDIS_HOST) += rndis_host.o -obj-$(CONFIG_USB_NET_CDC_SUBSET) += cdc_subset.o +obj-$(CONFIG_USB_NET_CDC_SUBSET_ENABLE) += cdc_subset.o obj-$(CONFIG_USB_NET_ZAURUS) += zaurus.o obj-$(CONFIG_USB_NET_MCS7830) += mcs7830.o obj-$(CONFIG_USB_USBNET) += usbnet.o -- 2.7.0 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
