A typo of j for i led to a logic bug. To rule out future
confusion, the variable names are made meaningful.
Signed-off-by: Oliver Neukum <ONeukum@xxxxxxxx>
CC: stable@xxxxxxxxxxxxxxx
---
drivers/usb/core/hub.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 0f82db4..1129ea7 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4344,7 +4344,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
{
struct usb_device *hdev = hub->hdev;
struct usb_hcd *hcd = bus_to_hcd(hdev->bus);
- int i, j, retval;
+ int retries, operations, retval, i;
unsigned delay = HUB_SHORT_RESET_TIME;
enum usb_device_speed oldspeed = udev->speed;
const char *speed;
@@ -4449,7 +4449,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
* first 8 bytes of the device descriptor to get the ep0 maxpacket
* value.
*/
- for (i = 0; i < GET_DESCRIPTOR_TRIES; (++i, msleep(100))) {
+ for (retries = 0; retries < GET_DESCRIPTOR_TRIES; (++retries, msleep(100))) {
bool did_new_scheme = false;
if (use_new_scheme(udev, retry_counter)) {
@@ -4476,7 +4476,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
* 255 is for WUSB devices, we actually need to use
* 512 (WUSB1.0[4.8.1]).
*/
- for (j = 0; j < 3; ++j) {
+ for (operations = 0; operations < 3; ++operations) {
buf->bMaxPacketSize0 = 0;
r = usb_control_msg(udev, usb_rcvaddr0pipe(),
USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
@@ -4502,7 +4502,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
* reset. But only on the first attempt,
* lest we get into a time out/reset loop
*/
- if (r == 0 || (r == -ETIMEDOUT && j == 0))
+ if (r == 0 || (r == -ETIMEDOUT && retries == 0))
break;
}
udev->descriptor.bMaxPacketSize0 =
@@ -4534,7 +4534,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
* authorization will assign the final address.
*/
if (udev->wusb == 0) {
- for (j = 0; j < SET_ADDRESS_TRIES; ++j) {
+ for (operations = 0; operations < SET_ADDRESS_TRIES; ++operations) {
retval = hub_set_address(udev, devnum);
if (retval >= 0)
break;
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
