* Rolf Peukert <rolf.peukert@xxxxxxx> [151023 08:46]:
> To be able to call these four helper functions from a M-USB AM35x driver
> module, their name symbols need to be exported.
I'd rather get rid of this file completely.. How about just do a minimal
drivers/phy driver? Maybe take a look at the drivers/phy/phy-dm816x-usb.c
for an example. Then you probably want to use the musb_dsps.c driver if
possible instead of the legacy am35x.c :)
Regards,
Tony
> Signed-off-by: Rolf Peukert <rolf.peukert@xxxxxxx>
> ---
> arch/arm/mach-omap2/omap_phy_internal.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/mach-omap2/omap_phy_internal.c
> b/arch/arm/mach-omap2/omap_phy_internal.c
> index 8e90356..648a60f 100644
> --- a/arch/arm/mach-omap2/omap_phy_internal.c
> +++ b/arch/arm/mach-omap2/omap_phy_internal.c
> @@ -82,6 +82,7 @@ void am35x_musb_reset(void)
>
> regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
> }
> +EXPORT_SYMBOL(am35x_musb_reset);
>
> void am35x_musb_phy_power(u8 on)
> {
> @@ -120,6 +121,7 @@ void am35x_musb_phy_power(u8 on)
> omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
> }
> }
> +EXPORT_SYMBOL(am35x_musb_phy_power);
>
> void am35x_musb_clear_irq(void)
> {
> @@ -130,6 +132,7 @@ void am35x_musb_clear_irq(void)
> omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
> regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
> }
> +EXPORT_SYMBOL(am35x_musb_clear_irq);
>
> void am35x_set_mode(u8 musb_mode)
> {
> @@ -152,3 +155,4 @@ void am35x_set_mode(u8 musb_mode)
>
> omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
> }
> +EXPORT_SYMBOL(am35x_set_mode);
> --
> 2.4.10
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
