If a failure happens early in udc_pci_probe(), error handling code just kfree(dev) and returns. The patch adds proper resource deallocations in udc_pci_probe() itself, since udc_pci_remove() is not suitabe to be called so early in initialization process. By the way, iounmap(dev->regs) is replaced by iounmap(dev->virt_addr) in udc_pci_remove() for clarity. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@xxxxxxxxx> --- drivers/usb/gadget/udc/amd5536udc.c | 43 +++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 23 deletions(-) diff --git a/drivers/usb/gadget/udc/amd5536udc.c b/drivers/usb/gadget/udc/amd5536udc.c index fdacddb18c00..175ca93fe5e2 100644 --- a/drivers/usb/gadget/udc/amd5536udc.c +++ b/drivers/usb/gadget/udc/amd5536udc.c @@ -3138,8 +3138,8 @@ static void udc_pci_remove(struct pci_dev *pdev) writel(AMD_BIT(UDC_DEVCFG_SOFTRESET), &dev->regs->cfg); if (dev->irq_registered) free_irq(pdev->irq, dev); - if (dev->regs) - iounmap(dev->regs); + if (dev->virt_addr) + iounmap(dev->virt_addr); if (dev->mem_region) release_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); @@ -3226,17 +3226,13 @@ static int udc_pci_probe( /* init */ dev = kzalloc(sizeof(struct udc), GFP_KERNEL); - if (!dev) { - retval = -ENOMEM; - goto finished; - } + if (!dev) + return -ENOMEM; /* pci setup */ if (pci_enable_device(pdev) < 0) { - kfree(dev); - dev = NULL; retval = -ENODEV; - goto finished; + goto err_pcidev; } dev->active = 1; @@ -3246,28 +3242,22 @@ static int udc_pci_probe( if (!request_mem_region(resource, len, name)) { dev_dbg(&pdev->dev, "pci device used already\n"); - kfree(dev); - dev = NULL; retval = -EBUSY; - goto finished; + goto err_memreg; } dev->mem_region = 1; dev->virt_addr = ioremap_nocache(resource, len); if (dev->virt_addr == NULL) { dev_dbg(&pdev->dev, "start address cannot be mapped\n"); - kfree(dev); - dev = NULL; retval = -EFAULT; - goto finished; + goto err_ioremap; } if (!pdev->irq) { dev_err(&pdev->dev, "irq not set\n"); - kfree(dev); - dev = NULL; retval = -ENODEV; - goto finished; + goto err_irq; } spin_lock_init(&dev->lock); @@ -3283,10 +3273,8 @@ static int udc_pci_probe( if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) { dev_dbg(&pdev->dev, "request_irq(%d) fail\n", pdev->irq); - kfree(dev); - dev = NULL; retval = -EBUSY; - goto finished; + goto err_irq; } dev->irq_registered = 1; @@ -3314,8 +3302,17 @@ static int udc_pci_probe( return 0; finished: - if (dev) - udc_pci_remove(pdev); + udc_pci_remove(pdev); + return retval; + +err_irq: + iounmap(dev->virt_addr); +err_ioremap: + release_mem_region(resource, len); +err_memreg: + pci_disable_device(pdev); +err_pcidev: + kfree(dev); return retval; } -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html