Currently an enabled break state is not disabled on final close nor on
re-open and has to be disabled manually.
Fix this by disabling break on port shutdown.
Reported-by: Jari Ruusu <jariruusu@xxxxxxxxxxxxxxxxxxxxx>
Tested-by: Jari Ruusu <jariruusu@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
---
drivers/usb/serial/pl2303.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 0f872e6b2c87..829604d11f3f 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -132,6 +132,7 @@ MODULE_DEVICE_TABLE(usb, id_table);
#define UART_OVERRUN_ERROR 0x40
#define UART_CTS 0x80
+static void pl2303_set_break(struct usb_serial_port *port, bool enable);
enum pl2303_type {
TYPE_01, /* Type 0 and 1 (difference unknown) */
@@ -615,6 +616,7 @@ static void pl2303_close(struct usb_serial_port *port)
{
usb_serial_generic_close(port);
usb_kill_urb(port->interrupt_in_urb);
+ pl2303_set_break(port, false);
}
static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -741,17 +743,16 @@ static int pl2303_ioctl(struct tty_struct *tty,
return -ENOIOCTLCMD;
}
-static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
+static void pl2303_set_break(struct usb_serial_port *port, bool enable)
{
- struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
u16 state;
int result;
- if (break_state == 0)
- state = BREAK_OFF;
- else
+ if (enable)
state = BREAK_ON;
+ else
+ state = BREAK_OFF;
dev_dbg(&port->dev, "%s - turning break %s\n", __func__,
state == BREAK_OFF ? "off" : "on");
@@ -763,6 +764,13 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
dev_err(&port->dev, "error sending break = %d\n", result);
}
+static void pl2303_break_ctl(struct tty_struct *tty, int state)
+{
+ struct usb_serial_port *port = tty->driver_data;
+
+ pl2303_set_break(port, state);
+}
+
static void pl2303_update_line_status(struct usb_serial_port *port,
unsigned char *data,
unsigned int actual_length)
--
2.0.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
