On Thu, Oct 23, 2014 at 6:19 PM, Johan Hovold <johan@xxxxxxxxxx> wrote:
>
> On Wed, Oct 15, 2014 at 05:48:09PM +0300, Octavian Purdila wrote:
>
> > +static int dln2_i2c_xfer(struct i2c_adapter *adapter,
> > + struct i2c_msg *msgs, int num)
> > +{
> > + struct dln2_i2c *dln2 = i2c_get_adapdata(adapter);
> > + struct i2c_msg *pmsg;
> > + struct device *dev = &dln2->pdev->dev;
>
> You want to use the i2c-adapter device here (not the platform device).
>
You are right, I will fix in v9.
> > + int i;
> > +
> > + for (i = 0; i < num; i++) {
> > + int ret;
> > +
> > + pmsg = &msgs[i];
> > +
> > + if (pmsg->len > DLN2_I2C_MAX_XFER_SIZE) {
> > + dev_warn(dev, "maximum transfer size exceeded\n");
> > + return -EOPNOTSUPP;
> > + }
> > +
> > + if (pmsg->flags & I2C_M_RD) {
> > + ret = dln2_i2c_read(dln2, pmsg->addr, pmsg->buf,
> > + pmsg->len);
> > + if (ret < 0)
> > + return ret;
> > +
> > + pmsg->len = ret;
> > + } else {
> > + ret = dln2_i2c_write(dln2, pmsg->addr, pmsg->buf,
> > + pmsg->len);
> > + if (ret != pmsg->len)
> > + return -EPROTO;
> > + }
> > + }
> > +
> > + return num;
> > +}
>
> [...]
>
> > +static int dln2_i2c_probe(struct platform_device *pdev)
> > +{
> > + int ret;
> > + struct dln2_i2c *dln2;
> > + struct device *dev = &pdev->dev;
> > + struct dln2_platform_data *pdata = dev_get_platdata(&pdev->dev);
> > +
> > + dln2 = devm_kzalloc(dev, sizeof(*dln2), GFP_KERNEL);
> > + if (!dln2)
> > + return -ENOMEM;
> > +
> > + dln2->buf = devm_kmalloc(dev, DLN2_I2C_BUF_SIZE, GFP_KERNEL);
> > + if (!dln2->buf)
> > + return -ENOMEM;
> > +
> > + dln2->pdev = pdev;
> > + dln2->port = pdata->port;
> > +
> > + /* setup i2c adapter description */
> > + dln2->adapter.owner = THIS_MODULE;
> > + dln2->adapter.class = I2C_CLASS_HWMON;
> > + dln2->adapter.algo = &dln2_i2c_usb_algorithm;
> > + dln2->adapter.dev.parent = dev;
> > + i2c_set_adapdata(&dln2->adapter, dln2);
> > + snprintf(dln2->adapter.name, sizeof(dln2->adapter.name), "%s-%s-%d",
> > + "dln2-i2c", dev_name(pdev->dev.parent), dln2->port);
> > +
> > + platform_set_drvdata(pdev, dln2);
> > +
> > + /* initialize the i2c interface */
>
> No longer "initialisation" since you dropped the frequency setup?
>
> > + ret = dln2_i2c_enable(dln2, true);
> > + if (ret < 0) {
> > + dev_err(dev, "failed to initialize adapter: %d\n", ret);
>
> Same here.
Hmm, I still consider this to be an initialization operation, albeit
less complex then it was before. If you don't mind too much, I would
prefer to keep it this way.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
