On Fri, Oct 17, 2014 at 09:41:44AM -0500, Felipe Balbi wrote:
> HI,
>
> On Fri, Oct 17, 2014 at 04:53:30PM +0800, Huang Rui wrote:
> > This patch adds a quirks flag at dwc3 structure, and SoCs platform vendor is
> > able to define this flag in platform data at bus glue layer. Then do some
> > independent behaviors at dwc3 core level.
> >
> > Signed-off-by: Huang Rui <ray.huang@xxxxxxx>
> > ---
> > drivers/usb/dwc3/core.c | 2 ++
> > drivers/usb/dwc3/core.h | 3 +++
> > drivers/usb/dwc3/dwc3-pci.c | 9 +++++++++
> > drivers/usb/dwc3/platform_data.h | 2 ++
> > 4 files changed, 16 insertions(+)
> >
<snip>
> > diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
> > index 7db34f0..1d3d65f 100644
> > --- a/drivers/usb/dwc3/platform_data.h
> > +++ b/drivers/usb/dwc3/platform_data.h
> > @@ -24,4 +24,6 @@ struct dwc3_platform_data {
> > enum usb_device_speed maximum_speed;
> > enum usb_dr_mode dr_mode;
> > bool tx_fifo_resize;
> > +
> > + u32 quirks;
>
> I prefer to have one-bit fields like we already have for delayed_status,
> ep0_bounced, ep0_expect_in, and so on. That makes it easier to support
> the same quirks through devicetree as well.
>
So it should define like below:
struct dwc3_platform_data {
...
unsigned one_quirk:1;
}
Then also defined it in dwc3 structure. And when dwc3 probed, put this
value from glue layer to dwc3, right?
Thanks,
Rui
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
