HI,
On Fri, Oct 17, 2014 at 04:53:30PM +0800, Huang Rui wrote:
> This patch adds a quirks flag at dwc3 structure, and SoCs platform vendor is
> able to define this flag in platform data at bus glue layer. Then do some
> independent behaviors at dwc3 core level.
>
> Signed-off-by: Huang Rui <ray.huang@xxxxxxx>
> ---
> drivers/usb/dwc3/core.c | 2 ++
> drivers/usb/dwc3/core.h | 3 +++
> drivers/usb/dwc3/dwc3-pci.c | 9 +++++++++
> drivers/usb/dwc3/platform_data.h | 2 ++
> 4 files changed, 16 insertions(+)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index ddac372..50c0eae 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -710,6 +710,8 @@ static int dwc3_probe(struct platform_device *pdev)
>
> dwc->needs_fifo_resize = pdata->tx_fifo_resize;
> dwc->dr_mode = pdata->dr_mode;
> +
> + dwc->quirks = pdata->quirks;
> }
>
> /* default to superspeed if no maximum_speed passed */
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index f6ee623..cfe0d57 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -636,6 +636,7 @@ struct dwc3_scratchpad_array {
> * @u1u2: only used on revisions <1.83a for workaround
> * @maximum_speed: maximum speed requested (mainly for testing purposes)
> * @revision: revision register contents
> + * @quirks: represents different SOCs hardware work-arounds and quirks
> * @dr_mode: requested mode of operation
> * @usb2_phy: pointer to USB2 PHY
> * @usb3_phy: pointer to USB3 PHY
> @@ -740,6 +741,8 @@ struct dwc3 {
> #define DWC3_REVISION_270A 0x5533270a
> #define DWC3_REVISION_280A 0x5533280a
>
> + u32 quirks;
> +
> enum dwc3_ep0_next ep0_next_event;
> enum dwc3_ep0_state ep0state;
> enum dwc3_link_state link_state;
> diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
> index 3806547..18569a4 100644
> --- a/drivers/usb/dwc3/dwc3-pci.c
> +++ b/drivers/usb/dwc3/dwc3-pci.c
> @@ -25,6 +25,8 @@
> #include <linux/usb/otg.h>
> #include <linux/usb/usb_phy_generic.h>
>
> +#include "platform_data.h"
> +
> /* FIXME define these in <linux/pci_ids.h> */
> #define PCI_VENDOR_ID_SYNOPSYS 0x16c3
> #define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd
> @@ -103,6 +105,9 @@ static int dwc3_pci_probe(struct pci_dev *pci,
> struct dwc3_pci *glue;
> int ret;
> struct device *dev = &pci->dev;
> + struct dwc3_platform_data dwc3_pdata;
> +
> + memset(&dwc3_pdata, 0x00, sizeof(dwc3_pdata));
>
> glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL);
> if (!glue)
> @@ -149,6 +154,10 @@ static int dwc3_pci_probe(struct pci_dev *pci,
>
> pci_set_drvdata(pci, glue);
>
> + ret = platform_device_add_data(dwc3, &dwc3_pdata, sizeof(dwc3_pdata));
> + if (ret)
> + goto err3;
> +
> dma_set_coherent_mask(&dwc3->dev, dev->coherent_dma_mask);
>
> dwc3->dev.dma_mask = dev->dma_mask;
> diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
> index 7db34f0..1d3d65f 100644
> --- a/drivers/usb/dwc3/platform_data.h
> +++ b/drivers/usb/dwc3/platform_data.h
> @@ -24,4 +24,6 @@ struct dwc3_platform_data {
> enum usb_device_speed maximum_speed;
> enum usb_dr_mode dr_mode;
> bool tx_fifo_resize;
> +
> + u32 quirks;
I prefer to have one-bit fields like we already have for delayed_status,
ep0_bounced, ep0_expect_in, and so on. That makes it easier to support
the same quirks through devicetree as well.
--
balbi
Attachment:
signature.asc
Description: Digital signature
