On Fri, Aug 15, 2014 at 12:21:19PM +0300, Ivan T. Ivanov wrote:
> From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
>
> PHY drivers keep track of the current state of the hardware,
> so don't change PHY settings under it.
>
> Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxxxxx>
looks correct to me from a PHY API perspective, so:
Acked-by: Felipe Balbi <balbi@xxxxxx>
However, it doesn't look like msm_phy_init() is equivalent to the lines
removes. Care to comment ?
> ---
> drivers/usb/chipidea/ci_hdrc_msm.c | 9 ++-------
> 1 file changed, 2 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
> index d72b9d2..81de834 100644
> --- a/drivers/usb/chipidea/ci_hdrc_msm.c
> +++ b/drivers/usb/chipidea/ci_hdrc_msm.c
> @@ -20,13 +20,11 @@
> static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
> {
> struct device *dev = ci->gadget.dev.parent;
> - int val;
>
> switch (event) {
> case CI_HDRC_CONTROLLER_RESET_EVENT:
> dev_dbg(dev, "CI_HDRC_CONTROLLER_RESET_EVENT received\n");
> - writel(0, USB_AHBBURST);
> - writel(0, USB_AHBMODE);
> + usb_phy_init(ci->transceiver);
> break;
> case CI_HDRC_CONTROLLER_STOPPED_EVENT:
> dev_dbg(dev, "CI_HDRC_CONTROLLER_STOPPED_EVENT received\n");
> @@ -34,10 +32,7 @@ static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
> * Put the transceiver in non-driving mode. Otherwise host
> * may not detect soft-disconnection.
> */
> - val = usb_phy_io_read(ci->transceiver, ULPI_FUNC_CTRL);
> - val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
> - val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
> - usb_phy_io_write(ci->transceiver, val, ULPI_FUNC_CTRL);
> + usb_phy_notify_disconnect(ci->transceiver, USB_SPEED_UNKNOWN);
> break;
> default:
> dev_dbg(dev, "unknown ci_hdrc event\n");
> --
> 1.8.3.2
>
--
balbi
Attachment:
signature.asc
Description: Digital signature
