Re: [PATCH RESEND] usb: chipidea: msm: Use USB PHY API to control PHY state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2014-08-19 at 14:06 -0500, Felipe Balbi wrote:
> On Fri, Aug 15, 2014 at 12:21:19PM +0300, Ivan T. Ivanov wrote:
> > From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
> > 
> > PHY drivers keep track of the current state of the hardware,
> > so don't change PHY settings under it.
> > 
> > Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxxxxx>
> 
> looks correct to me from a PHY API perspective, so:
> 
> Acked-by: Felipe Balbi <balbi@xxxxxx>
> 

Thanks.

> However, it doesn't look like msm_phy_init() is equivalent to the lines
> removes. Care to comment ?
> 

What I have to actually do is just add phy_init(). No need to remove
controller reinitialization. Tested and is working. Will post 2 new
patches shortly. 

Regards,
Ivan

> > ---
> >  drivers/usb/chipidea/ci_hdrc_msm.c | 9 ++-------
> >  1 file changed, 2 insertions(+), 7 deletions(-)
> > 
> > diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
> > index d72b9d2..81de834 100644
> > --- a/drivers/usb/chipidea/ci_hdrc_msm.c
> > +++ b/drivers/usb/chipidea/ci_hdrc_msm.c
> > @@ -20,13 +20,11 @@
> >  static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
> >  {
> >  	struct device *dev = ci->gadget.dev.parent;
> > -	int val;
> >  
> >  	switch (event) {
> >  	case CI_HDRC_CONTROLLER_RESET_EVENT:
> >  		dev_dbg(dev, "CI_HDRC_CONTROLLER_RESET_EVENT received\n");
> > -		writel(0, USB_AHBBURST);
> > -		writel(0, USB_AHBMODE);
> > +		usb_phy_init(ci->transceiver);
> >  		break;
> >  	case CI_HDRC_CONTROLLER_STOPPED_EVENT:
> >  		dev_dbg(dev, "CI_HDRC_CONTROLLER_STOPPED_EVENT received\n");
> > @@ -34,10 +32,7 @@ static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
> >  		 * Put the transceiver in non-driving mode. Otherwise host
> >  		 * may not detect soft-disconnection.
> >  		 */
> > -		val = usb_phy_io_read(ci->transceiver, ULPI_FUNC_CTRL);
> > -		val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
> > -		val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
> > -		usb_phy_io_write(ci->transceiver, val, ULPI_FUNC_CTRL);
> > +		usb_phy_notify_disconnect(ci->transceiver, USB_SPEED_UNKNOWN);
> >  		break;
> >  	default:
> >  		dev_dbg(dev, "unknown ci_hdrc event\n");
> > -- 
> > 1.8.3.2
> > 
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux