W dniu 02.04.2014 16:39, clanlab.proj pisze:
Hi Andrzej,
My device supports rndis only and the platform was beased on Android. Sorry I cannot test with the behavior like what you've did. Could you provide the board information to me and maybe I can trying to get one?
It's a board with an s5pc110 chip.
Btw, when I tested g_ether gadget by enable/disable from Android UI it looks all fine.
Are you using it as a loadable module, or compiled-in? Does Android UI really control g_ether? Or perhaps it controls android gadget, which is a different thing than g_ether? Android gadget is not in mainline kernel.
Sorry I cannot test the plug/un-plug behavior for you.
What I imagine is that you have a (development) board with an ARM and an UDC (OTG) chip, and you connect the board to a PC host. So it should be possible to detach the cable and attach it again, shouldn't it?
I'll try to figure out if it can be fixed or improved by code reviewing.
It looks like eth_stop should be called somewhere when the gadget is unplugged. But as it is now it is called only when g_ether module is unloaded. AP -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
