Add the necessary links to add the USB phy nodes to the PCI devices that are behind the bridges specified. Signed-off-by: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx> --- arch/arm/boot/dts/r8a7790-lager.dts | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 63d58d6..62f486e 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -233,18 +233,55 @@ &pci0 { pinctrl-0 = <&usb0_pins>; pinctrl-names = "default"; + device_type = "pci"; + + pci@0,1 { + reg = <0x800 0 0 0 0>; + device_type = "pci"; + usb-phy = <&usbphy>; + }; + + pci@0,2 { + reg = <0x1000 0 0 0 0>; + device_type = "pci"; + usb-phy = <&usbphy>; + }; }; &pci1 { status = "okay"; pinctrl-0 = <&usb1_pins>; pinctrl-names = "default"; + + pci@0,1 { + reg = <0x800 0 0 0 0>; + device_type = "pci"; + usb-phy = <&usbphy>; + }; + + pci@0,2 { + reg = <0x1000 0 0 0 0>; + device_type = "pci"; + usb-phy = <&usbphy>; + }; }; &pci2 { status = "okay"; pinctrl-0 = <&usb2_pins>; pinctrl-names = "default"; + + pci@0,1 { + reg = <0x800 0 0 0 0>; + device_type = "pci"; + usb-phy = <&usbphy>; + }; + + pci@0,2 { + reg = <0x1000 0 0 0 0>; + device_type = "pci"; + usb-phy = <&usbphy>; + }; }; &usbphy { -- 1.9.0 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html