Hello.
On 03/06/2014 09:01 PM, Ben Dooks wrote:
Add the necessary links to add the USB phy nodes to the PCI devices
that are behind the bridges specified.
Signed-off-by: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/r8a7790-lager.dts | 37 +++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 63d58d6..62f486e 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -233,18 +233,55 @@
&pci0 {
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
+ device_type = "pci";
+
+ pci@0,1 {
+ reg = <0x800 0 0 0 0>;
+ device_type = "pci";
+ usb-phy = <&usbphy>;
+ };
+
+ pci@0,2 {
+ reg = <0x1000 0 0 0 0>;
+ device_type = "pci";
+ usb-phy = <&usbphy>;
+ };
};
&pci1 {
status = "okay";
pinctrl-0 = <&usb1_pins>;
pinctrl-names = "default";
+
+ pci@0,1 {
+ reg = <0x800 0 0 0 0>;
+ device_type = "pci";
+ usb-phy = <&usbphy>;
+ };
+
+ pci@0,2 {
+ reg = <0x1000 0 0 0 0>;
+ device_type = "pci";
+ usb-phy = <&usbphy>;
+ };
};
&pci2 {
status = "okay";
pinctrl-0 = <&usb2_pins>;
pinctrl-names = "default";
+
+ pci@0,1 {
+ reg = <0x800 0 0 0 0>;
+ device_type = "pci";
+ usb-phy = <&usbphy>;
+ };
+
+ pci@0,2 {
+ reg = <0x1000 0 0 0 0>;
+ device_type = "pci";
+ usb-phy = <&usbphy>;
+ };
};
I don't see why the internal PCI devices are added to the board file, not
the SoC file.
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
