Add nodes for USB PCI bridge devices.
Signed-off-by: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
Reviewed-by: Ian Molton <ian.molton@xxxxxxxxxxxxxxx>
---
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-sh@xxxxxxxxxxxxxxx
Cc: horms+renesas@xxxxxxxxxxxx
Conflicts:
arch/arm/boot/dts/r8a7790.dtsi
---
arch/arm/boot/dts/r8a7790.dtsi | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index a1e7c39..7325fee 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -763,4 +763,43 @@
#size-cells = <0>;
status = "disabled";
};
+
+ pci0: pci@ee090000 {
+ compatible = "renesas,pci-r8a7790";
+ clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+ reg = <0x0 0xee090000 0x0 0xc00>,
+ <0x0 0xee080000 0x0 0x1100>;
+ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+
+ bus-range = <0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ };
+
+ pci1: pci@ee0b0000 {
+ compatible = "renesas,pci-r8a7790";
+ clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+ reg = <0x0 0xee0b0000 0x0 0xc00>,
+ <0x0 0xee0a0000 0x0 0x1100>;
+ interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+
+ bus-range = <1 1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ };
+
+ pci2: pci@ee0d0000 {
+ compatible = "renesas,pci-r8a7790";
+ clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+ reg = <0x0 0xee0d0000 0x0 0xc00>,
+ <0x0 0xee0c0000 0x0 0x1100>;
+ interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+
+ bus-range = <2 2>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ };
};
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
