Hi Benoit & Tony, This patchset brings up USB Host ports and Ethernet port on the OMAP5 uEVM board. It depends on the TI Clock DT conversion patches [1] and is based on 3.13-rc7 [1] - http://article.gmane.org/gmane.linux.ports.arm.kernel/289895 Changelog: v4: - Updated DT binding document for clock binding v3: - Rebased on top of 3.13-rc7 cheers, -roger Roger Quadros (5): mfd: omap-usb-host: Update DT clock binding information ARM: dts: OMAP5: Add 60MHz clock reference to USB Host module ARM: dts: omap4-panda: Provide USB PHY clock ARM: dts: omap5-uevm: Provide USB PHY clock ARM: OMAP2+: Remove legacy_init_ehci_clk() Documentation/devicetree/bindings/mfd/omap-usb-host.txt | 4 ++++ arch/arm/boot/dts/omap4-panda-common.dtsi | 8 ++------ arch/arm/boot/dts/omap5-uevm.dts | 8 ++------ arch/arm/boot/dts/omap5.dtsi | 2 ++ arch/arm/mach-omap2/pdata-quirks.c | 16 ---------------- 5 files changed, 10 insertions(+), 28 deletions(-) -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
