The omap-usb-host driver expects the 60MHz functional clock of the USB host module to be named as "init_60m_fclk". Add this information in the DT binding document. CC: Lee Jones <lee.jones@xxxxxxxxxx> CC: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx> Signed-off-by: Roger Quadros <rogerq@xxxxxx> --- Documentation/devicetree/bindings/mfd/omap-usb-host.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt index b381fa6..5635202 100644 --- a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt +++ b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt @@ -32,6 +32,10 @@ Optional properties: - single-ulpi-bypass: Must be present if the controller contains a single ULPI bypass control bit. e.g. OMAP3 silicon <= ES2.1 +- clocks: phandle to 60MHz functional clock to the USB Host module. + +- clock-names: must be "init_60m_fclk" + Required properties if child node exists: - #address-cells: Must be 1 -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
