Hi Rob,
On Wed, Aug 25 2021, Rob Herring wrote:
> On Wed, Aug 25, 2021 at 6:25 AM Baruch Siach <baruch@xxxxxxxxxx> wrote:
>> On Fri, Aug 06 2021, Rob Herring wrote:
>> > On Wed, May 5, 2021 at 3:18 AM Baruch Siach <baruch@xxxxxxxxxx> wrote:
>> >> + writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base + offset +
>> >> + PCI_EXP_DEVCTL2);
>> >> +
>> >> + writel(PCIE_CAP_CURR_DEEMPHASIS | SPEED_GEN3,
>> >> + pci->dbi_base + offset + PCI_EXP_DEVCTL2);
>> >
>> > Doesn't this overwrite the prior register write?
>>
>> It does. There are two mistakes here. The writel() above should set
>> PCIE20_DEVICE_CONTROL2_STATUS2 (offset 0x98).
>
> No. Did you check what 'offset' is? PCIE20_DEVICE_CONTROL2_STATUS2 is
> PCI_EXP_DEVCTL2 plus the status reg. What's wrong is it should be a
> 16-bit write.
Thanks for enlightening me. 'offset' is 0x70 here. So PCI_EXP_DEVCTL2 is
at 0x98, and PCI_EXP_LNKCTL2 is at 0xa0. Only the second writel() is
wrong. But since generic code handles speed, I can drop it entirely.
I see that dw_pcie_link_set_max_speed() uses dw_pcie_writel_dbi() to
write to PCI_EXP_LNKCTL2. Is that 16-bit write?
Why are pci_regs.h register offsets in decimal?
>> This writel() should set
>> PCIE20_LNK_CONTROL2_LINK_STATUS2 (offset 0xa0). So both are wrong.
Thanks,
baruch
--
~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch@xxxxxxxxxx - tel: +972.52.368.4656, http://www.tkos.co.il -
