From: Stephen Warren <swarren@xxxxxxxxxx>
For a little over a year, U-Boot has configured the flow controller to
perform automatic RAM re-repair on off->on power transitions of the CPU
rail1]. This is mandatory for correct operation of Tegra124. However, RAM
re-repair relies on certain clocks, which the kernel must enable and
leave running. The fuse clock is one of those clocks. Enable this clock
so that LP1 power mode (system suspend) operates correctly.
[1] 3cc7942a4ae5 ARM: tegra: implement RAM repair
Reported-by: Jonathan Hunter <jonathanh@xxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Stephen Warren <swarren@xxxxxxxxxx>
---
drivers/clk/tegra/clk-tegra124.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c
index 0224fdc4766f..f53f6315c646 100644
--- a/drivers/clk/tegra/clk-tegra124.c
+++ b/drivers/clk/tegra/clk-tegra124.c
@@ -1291,6 +1291,7 @@ static struct tegra_clk_init_table common_init_table[] __initdata = {
};
static struct tegra_clk_init_table tegra124_init_table[] __initdata = {
+ { TEGRA124_CLK_FUSE, -1, 0, 1 },
{ TEGRA124_CLK_SOC_THERM, TEGRA124_CLK_PLL_P, 51000000, 0 },
{ TEGRA124_CLK_CCLK_G, TEGRA124_CLK_CLK_MAX, 0, 1 },
{ TEGRA124_CLK_HDA, TEGRA124_CLK_PLL_P, 102000000, 0 },
--
2.23.0
