[PATCH v4 1/2] dt-bindings: pci: tegra: Update for per-lane PHYs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Thierry Reding <treding@xxxxxxxxxx>

Changes to the pad controller device tree binding have required that
each lane be associated with a separate PHY. Update the PCI host bridge
device tree binding to allow each root port to define the list of PHYs
required to drive the lanes associated with it.

Acked-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
Changes in v4:
- add additional lanes subnode when dereferencing PHYs from the XUSB pad
  controller to reflect changes in its binding

 .../devicetree/bindings/pci/nvidia,tegra20-pcie.txt    | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
index 75321ae23c08..f5364084b494 100644
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
@@ -60,11 +60,14 @@ Required properties:
   - afi
   - pcie_x
 
-Required properties on Tegra124 and later:
+Required properties on Tegra124 and later (deprecated):
 - phys: Must contain an entry for each entry in phy-names.
 - phy-names: Must include the following entries:
   - pcie
 
+These properties are deprecated in favour of per-lane PHYs define in each of
+the root ports (see below).
+
 Power supplies for Tegra20:
 - avdd-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
 - vdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
@@ -122,6 +125,13 @@ Required properties:
   - Root port 0 uses 4 lanes, root port 1 is unused.
   - Both root ports use 2 lanes.
 
+Required properties for Tegra124 and later:
+- phys: Must contain an phandle to a PHY for each entry in phy-names.
+- phy-names: Must include an entry for each active lane. Note that the number
+  of entries does not have to (though usually will) be equal to the specified
+  number of lanes in the nvidia,num-lanes property. Entries are of the form
+  "pcie-N": where N ranges from 0 to the value specified in nvidia,num-lanes.
+
 Example:
 
 SoC DTSI:
@@ -169,6 +179,9 @@ SoC DTSI:
 			ranges;
 
 			nvidia,num-lanes = <2>;
+
+			phys = <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-4}>;
+			phy-names = "pcie-0";
 		};
 
 		pci@2,0 {
@@ -183,6 +196,9 @@ SoC DTSI:
 			ranges;
 
 			nvidia,num-lanes = <2>;
+
+			phys = <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-2}>;
+			phy-names = "pcie-0";
 		};
 	};
 
-- 
2.8.0

--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux