From: Thierry Reding <treding@xxxxxxxxxx>
The kerneldoc for struct tegra_dfll_soc_data is stale. Update it to
match the current structure definition.
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
drivers/clk/tegra/clk-dfll.h | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/clk/tegra/clk-dfll.h b/drivers/clk/tegra/clk-dfll.h
index 2e4c0772a5dc..7e66c07c4d2b 100644
--- a/drivers/clk/tegra/clk-dfll.h
+++ b/drivers/clk/tegra/clk-dfll.h
@@ -24,15 +24,14 @@
/**
* struct tegra_dfll_soc_data - SoC-specific hooks/integration for the DFLL driver
- * @opp_dev: struct device * that holds the OPP table for the DFLL
+ * @dev: struct device * that holds the OPP table for the DFLL
* @min_millivolts: minimum voltage (in mV) that the DFLL can operate
* @tune0_low: DFLL tuning register 0 (low voltage range)
* @tune0_high: DFLL tuning register 0 (high voltage range)
* @tune1: DFLL tuning register 1
- * @assert_dvco_reset: fn ptr to place the DVCO in reset
- * @deassert_dvco_reset: fn ptr to release the DVCO reset
- * @set_clock_trimmers_high: fn ptr to tune clock trimmers for high voltage
- * @set_clock_trimmers_low: fn ptr to tune clock trimmers for low voltage
+ * @init_clock_trimmers: callback to initialize clock trimmers
+ * @set_clock_trimmers_high: callback to tune clock trimmers for high voltage
+ * @set_clock_trimmers_low: callback to tune clock trimmers for low voltage
*/
struct tegra_dfll_soc_data {
struct device *dev;
@@ -40,6 +39,7 @@ struct tegra_dfll_soc_data {
u32 tune0_low;
u32 tune0_high;
u32 tune1;
+
void (*init_clock_trimmers)(void);
void (*set_clock_trimmers_high)(void);
void (*set_clock_trimmers_low)(void);
--
2.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
