[PATCH v3] ARM: tegra: Correct which USB controller has the UTMI pad registers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It should be the first controller, not the second. The indexes of the
usb resets were also wrong and have been fixed.

The issue was caused by the changes in 308efde ("ARM: tegra: Add resets
& has-utmi-pad-registers flag to all USB PHYs") being misapplied by git
due to the patch context being insufficient.

This broke USB after 6261b06 ("regulator: Defer lookup of supply to
regulator_get"), because it changed the order in which the controllers
were probed.

The fix for this issue was suggested by Mikko Perttunen and Tuomas
Tynkkynen.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
Cc: Mikko Perttunen <mikko.perttunen@xxxxxxxx>
Cc: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
---
Hi,

hope I have gotten it right this time, but please do check :)

Thanks,

Tomeu
---
 arch/arm/boot/dts/tegra124.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index cf01c81..13cc7ca 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -809,114 +809,114 @@
 		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
 		reg = <0x0 0x7d000000 0x0 0x4000>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA124_CLK_USBD>;
 		resets = <&tegra_car 22>;
 		reset-names = "usb";
 		nvidia,phy = <&phy1>;
 		status = "disabled";
 	};
 
 	phy1: usb-phy@0,7d000000 {
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d000000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA124_CLK_USBD>,
 			 <&tegra_car TEGRA124_CLK_PLL_U>,
 			 <&tegra_car TEGRA124_CLK_USBD>;
 		clock-names = "reg", "pll_u", "utmi-pads";
-		resets = <&tegra_car 59>, <&tegra_car 22>;
+		resets = <&tegra_car 22>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
 		nvidia,hssync-start-delay = <0>;
 		nvidia,idle-wait-delay = <17>;
 		nvidia,elastic-limit = <16>;
 		nvidia,term-range-adj = <6>;
 		nvidia,xcvr-setup = <9>;
 		nvidia,xcvr-lsfslew = <0>;
 		nvidia,xcvr-lsrslew = <3>;
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
+		nvidia,has-utmi-pad-registers;
 		status = "disabled";
 	};
 
 	usb@0,7d004000 {
 		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
 		reg = <0x0 0x7d004000 0x0 0x4000>;
 		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA124_CLK_USB2>;
 		resets = <&tegra_car 58>;
 		reset-names = "usb";
 		nvidia,phy = <&phy2>;
 		status = "disabled";
 	};
 
 	phy2: usb-phy@0,7d004000 {
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d004000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA124_CLK_USB2>,
 			 <&tegra_car TEGRA124_CLK_PLL_U>,
 			 <&tegra_car TEGRA124_CLK_USBD>;
 		clock-names = "reg", "pll_u", "utmi-pads";
-		resets = <&tegra_car 22>, <&tegra_car 22>;
+		resets = <&tegra_car 58>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
 		nvidia,hssync-start-delay = <0>;
 		nvidia,idle-wait-delay = <17>;
 		nvidia,elastic-limit = <16>;
 		nvidia,term-range-adj = <6>;
 		nvidia,xcvr-setup = <9>;
 		nvidia,xcvr-lsfslew = <0>;
 		nvidia,xcvr-lsrslew = <3>;
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
-		nvidia,has-utmi-pad-registers;
 		status = "disabled";
 	};
 
 	usb@0,7d008000 {
 		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
 		reg = <0x0 0x7d008000 0x0 0x4000>;
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA124_CLK_USB3>;
 		resets = <&tegra_car 59>;
 		reset-names = "usb";
 		nvidia,phy = <&phy3>;
 		status = "disabled";
 	};
 
 	phy3: usb-phy@0,7d008000 {
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d008000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA124_CLK_USB3>,
 			 <&tegra_car TEGRA124_CLK_PLL_U>,
 			 <&tegra_car TEGRA124_CLK_USBD>;
 		clock-names = "reg", "pll_u", "utmi-pads";
-		resets = <&tegra_car 58>, <&tegra_car 22>;
+		resets = <&tegra_car 59>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
 		nvidia,hssync-start-delay = <0>;
 		nvidia,idle-wait-delay = <17>;
 		nvidia,elastic-limit = <16>;
 		nvidia,term-range-adj = <6>;
 		nvidia,xcvr-setup = <9>;
 		nvidia,xcvr-lsfslew = <0>;
 		nvidia,xcvr-lsrslew = <3>;
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
 		status = "disabled";
 	};
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		cpu@0 {
 			device_type = "cpu";
-- 
2.3.4

--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux