Re: [PATCH v2] ARM: tegra: Correct which USB controller has the UTMI pad registers

[Mikko Perttunen <mikko.perttunen@xxxxxxxx>]

On 04/02/2015 06:20 PM, Mikko Perttunen wrote:
> Reviewed-by: Mikko Perttunen <mikko.perttunen@xxxxxxxx>

Scratch that;

as Tuomas noted on IRC, the reset numbers here are still wrong.
phy1 should have 22 and phy2 58.

> On 04/02/2015 06:00 PM, Tomeu Vizoso wrote:
> > It should be the first controller, not the second.
> >
> > This broke USB after 6261b06 ("regulator: Defer lookup of supply to
> > regulator_get"), because it changed the order in which the controllers
> > were probed.
> >
> > The fix for this issue was suggested by Mikko Perttunen.
> >
> > Signed-off-by: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
> > Cc: Mikko Perttunen <mikko.perttunen@xxxxxxxx>
> > ---
> >
> > I think that the line numbers should be enough in this case, as I
> > expect this to be merged soon, but just in case I'm sending the same
> > patch with plenty of context.
> >
> > Regards,
> >
> > Tomeu
> >
> > ---
> >   arch/arm/boot/dts/tegra124.dtsi | 2 +-
> >   1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/boot/dts/tegra124.dtsi
> > b/arch/arm/boot/dts/tegra124.dtsi
> > index cf01c81..cb786a9 100644
> > --- a/arch/arm/boot/dts/tegra124.dtsi
> > +++ b/arch/arm/boot/dts/tegra124.dtsi
> > @@ -821,77 +821,77 @@
> >           compatible = "nvidia,tegra124-usb-phy",
> > "nvidia,tegra30-usb-phy";
> >           reg = <0x0 0x7d000000 0x0 0x4000>,
> >                 <0x0 0x7d000000 0x0 0x4000>;
> >           phy_type = "utmi";
> >           clocks = <&tegra_car TEGRA124_CLK_USBD>,
> >                <&tegra_car TEGRA124_CLK_PLL_U>,
> >                <&tegra_car TEGRA124_CLK_USBD>;
> >           clock-names = "reg", "pll_u", "utmi-pads";
> >           resets = <&tegra_car 59>, <&tegra_car 22>;
> >           reset-names = "usb", "utmi-pads";
> >           nvidia,hssync-start-delay = <0>;
> >           nvidia,idle-wait-delay = <17>;
> >           nvidia,elastic-limit = <16>;
> >           nvidia,term-range-adj = <6>;
> >           nvidia,xcvr-setup = <9>;
> >           nvidia,xcvr-lsfslew = <0>;
> >           nvidia,xcvr-lsrslew = <3>;
> >           nvidia,hssquelch-level = <2>;
> >           nvidia,hsdiscon-level = <5>;
> >           nvidia,xcvr-hsslew = <12>;
> > +        nvidia,has-utmi-pad-registers;
> >           status = "disabled";
> >       };
> >
> >       usb@0,7d004000 {
> >           compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci",
> > "usb-ehci";
> >           reg = <0x0 0x7d004000 0x0 0x4000>;
> >           interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> >           phy_type = "utmi";
> >           clocks = <&tegra_car TEGRA124_CLK_USB2>;
> >           resets = <&tegra_car 58>;
> >           reset-names = "usb";
> >           nvidia,phy = <&phy2>;
> >           status = "disabled";
> >       };
> >
> >       phy2: usb-phy@0,7d004000 {
> >           compatible = "nvidia,tegra124-usb-phy",
> > "nvidia,tegra30-usb-phy";
> >           reg = <0x0 0x7d004000 0x0 0x4000>,
> >                 <0x0 0x7d000000 0x0 0x4000>;
> >           phy_type = "utmi";
> >           clocks = <&tegra_car TEGRA124_CLK_USB2>,
> >                <&tegra_car TEGRA124_CLK_PLL_U>,
> >                <&tegra_car TEGRA124_CLK_USBD>;
> >           clock-names = "reg", "pll_u", "utmi-pads";
> >           resets = <&tegra_car 22>, <&tegra_car 22>;
> >           reset-names = "usb", "utmi-pads";
> >           nvidia,hssync-start-delay = <0>;
> >           nvidia,idle-wait-delay = <17>;
> >           nvidia,elastic-limit = <16>;
> >           nvidia,term-range-adj = <6>;
> >           nvidia,xcvr-setup = <9>;
> >           nvidia,xcvr-lsfslew = <0>;
> >           nvidia,xcvr-lsrslew = <3>;
> >           nvidia,hssquelch-level = <2>;
> >           nvidia,hsdiscon-level = <5>;
> >           nvidia,xcvr-hsslew = <12>;
> > -        nvidia,has-utmi-pad-registers;
> >           status = "disabled";
> >       };
> >
> >       usb@0,7d008000 {
> >           compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci",
> > "usb-ehci";
> >           reg = <0x0 0x7d008000 0x0 0x4000>;
> >           interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> >           phy_type = "utmi";
> >           clocks = <&tegra_car TEGRA124_CLK_USB3>;
> >           resets = <&tegra_car 59>;
> >           reset-names = "usb";
> >           nvidia,phy = <&phy3>;
> >           status = "disabled";
> >       };
> >
> >       phy3: usb-phy@0,7d008000 {
> >           compatible = "nvidia,tegra124-usb-phy",
> > "nvidia,tegra30-usb-phy";
> >           reg = <0x0 0x7d008000 0x0 0x4000>,
> >                 <0x0 0x7d000000 0x0 0x4000>;
> >           phy_type = "utmi";
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html