On Mon, Sep 22, 2014 at 12:11:54PM +0200, Thierry Reding wrote:
> * PGP Signed by an unknown key
>
> On Mon, Sep 22, 2014 at 11:00:56AM +0200, Lucas Stach wrote:
> > Am Freitag, den 19.09.2014, 15:53 -0400 schrieb Sean Paul:
> > > Per NVidia, this clock rate should be around 70MHz in
> > > order to properly sample reads on data lane 0. In order
> > > to achieve this rate, we need to reparent the clock from
> > > clk_m which can only achieve 12MHz. Add parent_lp to the
> > > dts bindings and set the parent & rate on init.
> > >
> > > Signed-off-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
> >
> > NACK
> >
> > You are pushing SoC integration details into the binding of the device.
> >
> > You have two reasonable routes to go here: either the clock driver needs
> > to be made smarter to reparent the clock in case the required clock rate
> > could not be achieved with the current parent or you go the easy route
> > and reparent the clock as part of the initial configuration.
>
> Agreed. There doesn't seem to be a case where it would make sense to
> have this configurable per-board. Can you achieve the same effect by
> adding this to the clock initialization table?
>
> Oh, I just see that we have this in the Tegra124 clock initialization
> table:
>
> {TEGRA114_CLK_DSIALP, TEGRA114_CLK_PLL_P, 68000000, 0},
> {TEGRA114_CLK_DSIBLP, TEGRA114_CLK_PLL_P, 68000000, 0},
>
> Doesn't that work for you already? If not that'd be a bug that should be
> fixed in the clock driver.
This seems the better approach indeed. Unless the rate would differ based
on board or other external factors.
Cheers,
Peter.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
