27.07.2013 22:09, Marc Dietrich пишет: > On Saturday 27 July 2013 20:20:38 Dmitry Osipenko wrote: >> 27.07.2013 20:12, Marc Dietrich пишет: >>> On Friday 26 July 2013 17:15:02 Joseph Lo wrote: >>>> This series adds the support of LP1 suspend mode for Tegra. >>>> >>>> Verified on Seaboard, Cardhu and Dalmore. >>> >>> tested on AC100 and worked fine, except >>> >>> [ 68.448007] PM: Syncing filesystems ... done. >>> [ 71.370086] Freezing user space processes ... (elapsed 0.001 seconds) >>> done. [ 71.370088] Freezing remaining freezable tasks ... (elapsed >>> 0.001 seconds) done. >>> [ 71.371253] Suspending console(s) (use no_console_suspend to debug) >>> [ 71.638481] PM: suspend of devices complete after 266.604 msecs >>> [ 71.638905] PM: late suspend of devices complete after 0.417 msecs >>> [ 71.639477] PM: noirq suspend of devices complete after 0.568 msecs >>> [ 71.639480] Disabling non-boot CPUs ... >>> [ 71.640242] CPU1: shutdown >>> [ 71.641216] Entering suspend state LP1 >>> [ 71.641267] Enabling non-boot CPUs ... >>> [ 71.643125] CPU1: Booted secondary processor >>> [ 71.643449] CPU1 is up >>> [ 71.643786] PM: noirq resume of devices complete after 0.331 msecs >>> [ 71.644300] PM: early resume of devices complete after 0.364 msecs >>> [ 71.648038] ------------[ cut here ]------------ >>> [ 71.648061] WARNING: CPU: 0 PID: 1025 at kernel/irq/manage.c:529 >>> irq_set_irq_wake+0xb8/0xf0() >>> [ 71.648064] Unbalanced IRQ 384 wake disable >>> [ 71.648068] Modules linked in: >>> [ 71.648075] CPU: 0 PID: 1025 Comm: bash Not tainted 3.11.0-rc2- >>> next-20130726-00008-gef01509-dirty #6 >>> [ 71.648107] [<c001551c>] (unwind_backtrace+0x0/0xf8) from [<c001154c>] >>> (show_stack+0x10/0x14) >>> [ 71.648128] [<c001154c>] (show_stack+0x10/0x14) from [<c0515288>] >>> (dump_stack+0x80/0xc4) >>> [ 71.648142] [<c0515288>] (dump_stack+0x80/0xc4) from [<c0025340>] >>> (warn_slowpath_common+0x64/0x88) >>> [ 71.648151] [<c0025340>] (warn_slowpath_common+0x64/0x88) from >>> [<c00253f8>] (warn_slowpath_fmt+0x30/0x40) >>> [ 71.648161] [<c00253f8>] (warn_slowpath_fmt+0x30/0x40) from >>> [<c007ff8c>] >>> (irq_set_irq_wake+0xb8/0xf0) >>> [ 71.648178] [<c007ff8c>] (irq_set_irq_wake+0xb8/0xf0) from [<c0334d00>] >>> (tps6586x_rtc_resume+0x30/0x38) >>> [ 71.648192] [<c0334d00>] (tps6586x_rtc_resume+0x30/0x38) from >>> [<c02951d0>] (platform_pm_resume+0x2c/0x4c) >>> [ 71.648202] [<c02951d0>] (platform_pm_resume+0x2c/0x4c) from >>> [<c0299d40>] (dpm_run_callback.isra.5+0x18/0x38) >>> [ 71.648211] [<c0299d40>] (dpm_run_callback.isra.5+0x18/0x38) from >>> [<c029a044>] (device_resume+0xb0/0x170) >>> [ 71.648219] [<c029a044>] (device_resume+0xb0/0x170) from [<c029aeb4>] >>> (dpm_resume+0xe8/0x20c) >>> [ 71.648227] [<c029aeb4>] (dpm_resume+0xe8/0x20c) from [<c029b174>] >>> (dpm_resume_end+0xc/0x18) >>> [ 71.648245] [<c029b174>] (dpm_resume_end+0xc/0x18) from [<c005e480>] >>> (suspend_devices_and_enter+0xdc/0x2f8) >>> [ 71.648256] [<c005e480>] (suspend_devices_and_enter+0xdc/0x2f8) from >>> [<c005e810>] (pm_suspend+0x174/0x1e8) >>> [ 71.648265] [<c005e810>] (pm_suspend+0x174/0x1e8) from [<c005d710>] >>> (state_store+0x6c/0xbc) >>> [ 71.648285] [<c005d710>] (state_store+0x6c/0xbc) from [<c01eca78>] >>> (kobj_attr_store+0x14/0x20) >>> [ 71.648298] [<c01eca78>] (kobj_attr_store+0x14/0x20) from [<c011e970>] >>> (sysfs_write_file+0x168/0x198) >>> [ 71.648312] [<c011e970>] (sysfs_write_file+0x168/0x198) from >>> [<c00cd060>] (vfs_write+0xb0/0x188) >>> [ 71.648321] [<c00cd060>] (vfs_write+0xb0/0x188) from [<c00cd410>] >>> (SyS_write+0x3c/0x70) >>> [ 71.648330] [<c00cd410>] (SyS_write+0x3c/0x70) from [<c000e560>] >>> (ret_fast_syscall+0x0/0x30) >>> [ 71.648334] ---[ end trace e5ed8212ac4db5da ]--- >>> [ 72.063578] mmc1: power class selection to bus width 8 failed >>> [ 72.297753] usb 2-1: reset high-speed USB device number 2 using >>> tegra-ehci [ 72.567736] usb 3-1: reset high-speed USB device number 2 >>> using tegra-ehci [ 73.022058] usb 3-1.3: reset high-speed USB device >>> number 4 using tegra- ehci >>> [ 73.216064] usb 3-1.2: reset high-speed USB device number 3 using >>> tegra- >>> ehci >>> [ 73.360225] PM: resume of devices complete after 1715.937 msecs >>> [ 73.361008] Restarting tasks ... done. >>> >>> and sdcard being offline after resume (fixed by >>> CONFIG_MMC_UNSAFE_RESUME=y). Anyway, thanks for your great work! >>> >>> Tested-By: Marc Dietrich <marvin24@xxxxxx> >> >> I had same warn on 3.8. >> https://bitbucket.org/digetx/picasso-kernel/commits/a86dc95ab48dd77eaa046384 >> 4cdf88a5acf9d842 > > Stephen Warren said on IRC that this is known and on the internal bug tracker > already. I just posted it so others are not surprised. Well, I should have > added that it's a know problem. Sorry for that. > > Marc > > > > It might be a known problem only for those who faced with it. Since it's on their internal irc, it wasn't a known issue. It also would be interesting to know if suspend with thumb2 works correctly. On 3.8 I've ported lp0 suspend and it works fine with arm compiled kernel, thumb2 also works but only for about 5-10 hours (resuming on each 5-30 minutes, default android behavior) and after I'm getting pmd corruption. I have no idea from where that corruption comes from without ability for hw debugging. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
