Re: [PATCH 0/8] ARM: tegra: support LP1 suspend mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Friday 26 July 2013 17:15:02 Joseph Lo wrote:
> This series adds the support of LP1 suspend mode for Tegra.
> 
> Verified on Seaboard, Cardhu and Dalmore.

tested on AC100 and worked fine, except

[   68.448007] PM: Syncing filesystems ... done.
[   71.370086] Freezing user space processes ... (elapsed 0.001 seconds) done.
[   71.370088] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) 
done.
[   71.371253] Suspending console(s) (use no_console_suspend to debug)
[   71.638481] PM: suspend of devices complete after 266.604 msecs
[   71.638905] PM: late suspend of devices complete after 0.417 msecs
[   71.639477] PM: noirq suspend of devices complete after 0.568 msecs
[   71.639480] Disabling non-boot CPUs ...
[   71.640242] CPU1: shutdown
[   71.641216] Entering suspend state LP1
[   71.641267] Enabling non-boot CPUs ...
[   71.643125] CPU1: Booted secondary processor
[   71.643449] CPU1 is up
[   71.643786] PM: noirq resume of devices complete after 0.331 msecs
[   71.644300] PM: early resume of devices complete after 0.364 msecs
[   71.648038] ------------[ cut here ]------------
[   71.648061] WARNING: CPU: 0 PID: 1025 at kernel/irq/manage.c:529 
irq_set_irq_wake+0xb8/0xf0()
[   71.648064] Unbalanced IRQ 384 wake disable
[   71.648068] Modules linked in:
[   71.648075] CPU: 0 PID: 1025 Comm: bash Not tainted 3.11.0-rc2-
next-20130726-00008-gef01509-dirty #6
[   71.648107] [<c001551c>] (unwind_backtrace+0x0/0xf8) from [<c001154c>] 
(show_stack+0x10/0x14)
[   71.648128] [<c001154c>] (show_stack+0x10/0x14) from [<c0515288>] 
(dump_stack+0x80/0xc4)
[   71.648142] [<c0515288>] (dump_stack+0x80/0xc4) from [<c0025340>] 
(warn_slowpath_common+0x64/0x88)
[   71.648151] [<c0025340>] (warn_slowpath_common+0x64/0x88) from [<c00253f8>] 
(warn_slowpath_fmt+0x30/0x40)
[   71.648161] [<c00253f8>] (warn_slowpath_fmt+0x30/0x40) from [<c007ff8c>] 
(irq_set_irq_wake+0xb8/0xf0)
[   71.648178] [<c007ff8c>] (irq_set_irq_wake+0xb8/0xf0) from [<c0334d00>] 
(tps6586x_rtc_resume+0x30/0x38)
[   71.648192] [<c0334d00>] (tps6586x_rtc_resume+0x30/0x38) from [<c02951d0>] 
(platform_pm_resume+0x2c/0x4c)
[   71.648202] [<c02951d0>] (platform_pm_resume+0x2c/0x4c) from [<c0299d40>] 
(dpm_run_callback.isra.5+0x18/0x38)
[   71.648211] [<c0299d40>] (dpm_run_callback.isra.5+0x18/0x38) from 
[<c029a044>] (device_resume+0xb0/0x170)
[   71.648219] [<c029a044>] (device_resume+0xb0/0x170) from [<c029aeb4>] 
(dpm_resume+0xe8/0x20c)
[   71.648227] [<c029aeb4>] (dpm_resume+0xe8/0x20c) from [<c029b174>] 
(dpm_resume_end+0xc/0x18)
[   71.648245] [<c029b174>] (dpm_resume_end+0xc/0x18) from [<c005e480>] 
(suspend_devices_and_enter+0xdc/0x2f8)
[   71.648256] [<c005e480>] (suspend_devices_and_enter+0xdc/0x2f8) from 
[<c005e810>] (pm_suspend+0x174/0x1e8)
[   71.648265] [<c005e810>] (pm_suspend+0x174/0x1e8) from [<c005d710>] 
(state_store+0x6c/0xbc)
[   71.648285] [<c005d710>] (state_store+0x6c/0xbc) from [<c01eca78>] 
(kobj_attr_store+0x14/0x20)
[   71.648298] [<c01eca78>] (kobj_attr_store+0x14/0x20) from [<c011e970>] 
(sysfs_write_file+0x168/0x198)
[   71.648312] [<c011e970>] (sysfs_write_file+0x168/0x198) from [<c00cd060>] 
(vfs_write+0xb0/0x188)
[   71.648321] [<c00cd060>] (vfs_write+0xb0/0x188) from [<c00cd410>] 
(SyS_write+0x3c/0x70)
[   71.648330] [<c00cd410>] (SyS_write+0x3c/0x70) from [<c000e560>] 
(ret_fast_syscall+0x0/0x30)
[   71.648334] ---[ end trace e5ed8212ac4db5da ]---
[   72.063578] mmc1: power class selection to bus width 8 failed
[   72.297753] usb 2-1: reset high-speed USB device number 2 using tegra-ehci
[   72.567736] usb 3-1: reset high-speed USB device number 2 using tegra-ehci
[   73.022058] usb 3-1.3: reset high-speed USB device number 4 using tegra-
ehci
[   73.216064] usb 3-1.2: reset high-speed USB device number 3 using tegra-
ehci
[   73.360225] PM: resume of devices complete after 1715.937 msecs
[   73.361008] Restarting tasks ... done.

and sdcard being offline after resume (fixed by CONFIG_MMC_UNSAFE_RESUME=y). 
Anyway, thanks for your great work!

Tested-By: Marc Dietrich <marvin24@xxxxxx>

> And tested with THUMB2_KERNEL as well.
> 
> P.S.
> A known issue on Dalmore, the LP1 resume may take 10 ~ 15 seconds due to
> the 792MHz BCT. It can't be reproduced on Seaboard or Cardhu. And the
> root cause of this is about the default settings of EMC registers that
> cause the DRAM can't leave self-refresh mode immediately. If you want
> to test with quick LP1 resume on Dalmore, I can provide another HACK for
> this.
> 
> Joseph Lo (8):
>   ARM: tegra: add common resume handling code for LP1 resuming
>   ARM: tegra: config the polarity of the request of sys clock
>   clk: tegra114: add LP1 suspend/resume support
>   ARM: tegra: add common LP1 suspend support
>   ARM: tegra30: add LP1 suspend support
>   ARM: tegra20: add LP1 suspend support
>   ARM: tegra114: add LP1 suspend support
>   ARM: dts: tegra: enable LP1 suspend mode
> 
>  arch/arm/boot/dts/tegra114-dalmore.dts     |   2 +-
>  arch/arm/boot/dts/tegra20-colibri-512.dtsi |   2 +-
>  arch/arm/boot/dts/tegra20-harmony.dts      |   2 +-
>  arch/arm/boot/dts/tegra20-paz00.dts        |   2 +-
>  arch/arm/boot/dts/tegra20-seaboard.dts     |   2 +-
>  arch/arm/boot/dts/tegra20-tamonten.dtsi    |   2 +-
>  arch/arm/boot/dts/tegra20-trimslice.dts    |   2 +-
>  arch/arm/boot/dts/tegra20-ventana.dts      |   2 +-
>  arch/arm/boot/dts/tegra20-whistler.dts     |   2 +-
>  arch/arm/boot/dts/tegra30-beaver.dts       |   2 +-
>  arch/arm/boot/dts/tegra30-cardhu.dtsi      |   2 +-
>  arch/arm/mach-tegra/Makefile               |   3 +
>  arch/arm/mach-tegra/iomap.h                |   6 +
>  arch/arm/mach-tegra/pm-tegra20.c           |  37 ++
>  arch/arm/mach-tegra/pm-tegra30.c           |  37 ++
>  arch/arm/mach-tegra/pm.c                   | 121 +++++-
>  arch/arm/mach-tegra/pm.h                   |  23 ++
>  arch/arm/mach-tegra/pmc.c                  |  36 +-
>  arch/arm/mach-tegra/pmc.h                  |   3 +
>  arch/arm/mach-tegra/reset-handler.S        |  13 +
>  arch/arm/mach-tegra/reset.c                |   2 +
>  arch/arm/mach-tegra/reset.h                |   4 +
>  arch/arm/mach-tegra/sleep-tegra20.S        | 300 ++++++++++++++
>  arch/arm/mach-tegra/sleep-tegra30.S        | 615
> +++++++++++++++++++++++++++++ arch/arm/mach-tegra/sleep.S                | 
>  8 +-
>  arch/arm/mach-tegra/sleep.h                |  18 +
>  drivers/clk/tegra/clk-tegra114.c           |  32 ++
>  27 files changed, 1259 insertions(+), 21 deletions(-)
>  create mode 100644 arch/arm/mach-tegra/pm-tegra20.c
>  create mode 100644 arch/arm/mach-tegra/pm-tegra30.c
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux