27.07.2013 20:12, Marc Dietrich пишет: > On Friday 26 July 2013 17:15:02 Joseph Lo wrote: >> This series adds the support of LP1 suspend mode for Tegra. >> >> Verified on Seaboard, Cardhu and Dalmore. > > tested on AC100 and worked fine, except > > [ 68.448007] PM: Syncing filesystems ... done. > [ 71.370086] Freezing user space processes ... (elapsed 0.001 seconds) done. > [ 71.370088] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) > done. > [ 71.371253] Suspending console(s) (use no_console_suspend to debug) > [ 71.638481] PM: suspend of devices complete after 266.604 msecs > [ 71.638905] PM: late suspend of devices complete after 0.417 msecs > [ 71.639477] PM: noirq suspend of devices complete after 0.568 msecs > [ 71.639480] Disabling non-boot CPUs ... > [ 71.640242] CPU1: shutdown > [ 71.641216] Entering suspend state LP1 > [ 71.641267] Enabling non-boot CPUs ... > [ 71.643125] CPU1: Booted secondary processor > [ 71.643449] CPU1 is up > [ 71.643786] PM: noirq resume of devices complete after 0.331 msecs > [ 71.644300] PM: early resume of devices complete after 0.364 msecs > [ 71.648038] ------------[ cut here ]------------ > [ 71.648061] WARNING: CPU: 0 PID: 1025 at kernel/irq/manage.c:529 > irq_set_irq_wake+0xb8/0xf0() > [ 71.648064] Unbalanced IRQ 384 wake disable > [ 71.648068] Modules linked in: > [ 71.648075] CPU: 0 PID: 1025 Comm: bash Not tainted 3.11.0-rc2- > next-20130726-00008-gef01509-dirty #6 > [ 71.648107] [<c001551c>] (unwind_backtrace+0x0/0xf8) from [<c001154c>] > (show_stack+0x10/0x14) > [ 71.648128] [<c001154c>] (show_stack+0x10/0x14) from [<c0515288>] > (dump_stack+0x80/0xc4) > [ 71.648142] [<c0515288>] (dump_stack+0x80/0xc4) from [<c0025340>] > (warn_slowpath_common+0x64/0x88) > [ 71.648151] [<c0025340>] (warn_slowpath_common+0x64/0x88) from [<c00253f8>] > (warn_slowpath_fmt+0x30/0x40) > [ 71.648161] [<c00253f8>] (warn_slowpath_fmt+0x30/0x40) from [<c007ff8c>] > (irq_set_irq_wake+0xb8/0xf0) > [ 71.648178] [<c007ff8c>] (irq_set_irq_wake+0xb8/0xf0) from [<c0334d00>] > (tps6586x_rtc_resume+0x30/0x38) > [ 71.648192] [<c0334d00>] (tps6586x_rtc_resume+0x30/0x38) from [<c02951d0>] > (platform_pm_resume+0x2c/0x4c) > [ 71.648202] [<c02951d0>] (platform_pm_resume+0x2c/0x4c) from [<c0299d40>] > (dpm_run_callback.isra.5+0x18/0x38) > [ 71.648211] [<c0299d40>] (dpm_run_callback.isra.5+0x18/0x38) from > [<c029a044>] (device_resume+0xb0/0x170) > [ 71.648219] [<c029a044>] (device_resume+0xb0/0x170) from [<c029aeb4>] > (dpm_resume+0xe8/0x20c) > [ 71.648227] [<c029aeb4>] (dpm_resume+0xe8/0x20c) from [<c029b174>] > (dpm_resume_end+0xc/0x18) > [ 71.648245] [<c029b174>] (dpm_resume_end+0xc/0x18) from [<c005e480>] > (suspend_devices_and_enter+0xdc/0x2f8) > [ 71.648256] [<c005e480>] (suspend_devices_and_enter+0xdc/0x2f8) from > [<c005e810>] (pm_suspend+0x174/0x1e8) > [ 71.648265] [<c005e810>] (pm_suspend+0x174/0x1e8) from [<c005d710>] > (state_store+0x6c/0xbc) > [ 71.648285] [<c005d710>] (state_store+0x6c/0xbc) from [<c01eca78>] > (kobj_attr_store+0x14/0x20) > [ 71.648298] [<c01eca78>] (kobj_attr_store+0x14/0x20) from [<c011e970>] > (sysfs_write_file+0x168/0x198) > [ 71.648312] [<c011e970>] (sysfs_write_file+0x168/0x198) from [<c00cd060>] > (vfs_write+0xb0/0x188) > [ 71.648321] [<c00cd060>] (vfs_write+0xb0/0x188) from [<c00cd410>] > (SyS_write+0x3c/0x70) > [ 71.648330] [<c00cd410>] (SyS_write+0x3c/0x70) from [<c000e560>] > (ret_fast_syscall+0x0/0x30) > [ 71.648334] ---[ end trace e5ed8212ac4db5da ]--- > [ 72.063578] mmc1: power class selection to bus width 8 failed > [ 72.297753] usb 2-1: reset high-speed USB device number 2 using tegra-ehci > [ 72.567736] usb 3-1: reset high-speed USB device number 2 using tegra-ehci > [ 73.022058] usb 3-1.3: reset high-speed USB device number 4 using tegra- > ehci > [ 73.216064] usb 3-1.2: reset high-speed USB device number 3 using tegra- > ehci > [ 73.360225] PM: resume of devices complete after 1715.937 msecs > [ 73.361008] Restarting tasks ... done. > > and sdcard being offline after resume (fixed by CONFIG_MMC_UNSAFE_RESUME=y). > Anyway, thanks for your great work! > > Tested-By: Marc Dietrich <marvin24@xxxxxx> > >> And tested with THUMB2_KERNEL as well. >> >> P.S. >> A known issue on Dalmore, the LP1 resume may take 10 ~ 15 seconds due to >> the 792MHz BCT. It can't be reproduced on Seaboard or Cardhu. And the >> root cause of this is about the default settings of EMC registers that >> cause the DRAM can't leave self-refresh mode immediately. If you want >> to test with quick LP1 resume on Dalmore, I can provide another HACK for >> this. >> >> Joseph Lo (8): >> ARM: tegra: add common resume handling code for LP1 resuming >> ARM: tegra: config the polarity of the request of sys clock >> clk: tegra114: add LP1 suspend/resume support >> ARM: tegra: add common LP1 suspend support >> ARM: tegra30: add LP1 suspend support >> ARM: tegra20: add LP1 suspend support >> ARM: tegra114: add LP1 suspend support >> ARM: dts: tegra: enable LP1 suspend mode >> >> arch/arm/boot/dts/tegra114-dalmore.dts | 2 +- >> arch/arm/boot/dts/tegra20-colibri-512.dtsi | 2 +- >> arch/arm/boot/dts/tegra20-harmony.dts | 2 +- >> arch/arm/boot/dts/tegra20-paz00.dts | 2 +- >> arch/arm/boot/dts/tegra20-seaboard.dts | 2 +- >> arch/arm/boot/dts/tegra20-tamonten.dtsi | 2 +- >> arch/arm/boot/dts/tegra20-trimslice.dts | 2 +- >> arch/arm/boot/dts/tegra20-ventana.dts | 2 +- >> arch/arm/boot/dts/tegra20-whistler.dts | 2 +- >> arch/arm/boot/dts/tegra30-beaver.dts | 2 +- >> arch/arm/boot/dts/tegra30-cardhu.dtsi | 2 +- >> arch/arm/mach-tegra/Makefile | 3 + >> arch/arm/mach-tegra/iomap.h | 6 + >> arch/arm/mach-tegra/pm-tegra20.c | 37 ++ >> arch/arm/mach-tegra/pm-tegra30.c | 37 ++ >> arch/arm/mach-tegra/pm.c | 121 +++++- >> arch/arm/mach-tegra/pm.h | 23 ++ >> arch/arm/mach-tegra/pmc.c | 36 +- >> arch/arm/mach-tegra/pmc.h | 3 + >> arch/arm/mach-tegra/reset-handler.S | 13 + >> arch/arm/mach-tegra/reset.c | 2 + >> arch/arm/mach-tegra/reset.h | 4 + >> arch/arm/mach-tegra/sleep-tegra20.S | 300 ++++++++++++++ >> arch/arm/mach-tegra/sleep-tegra30.S | 615 >> +++++++++++++++++++++++++++++ arch/arm/mach-tegra/sleep.S | >> 8 +- >> arch/arm/mach-tegra/sleep.h | 18 + >> drivers/clk/tegra/clk-tegra114.c | 32 ++ >> 27 files changed, 1259 insertions(+), 21 deletions(-) >> create mode 100644 arch/arm/mach-tegra/pm-tegra20.c >> create mode 100644 arch/arm/mach-tegra/pm-tegra30.c > -- > To unsubscribe from this list: send the line "unsubscribe linux-tegra" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > I had same warn on 3.8. https://bitbucket.org/digetx/picasso-kernel/commits/a86dc95ab48dd77eaa0463844cdf88a5acf9d842 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
