[PATCH 12/14] ARM: dts: suniv: licheepi-nano: add SPI flash

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Most LicheePi Nano boards come with soldered SPI flash, so enable SPI0
in the .dts and describe the flash chip. There is evidence of different
flash chips used, also of boards with no flash chip soldered, but the
Winbond 16MiB model is the most common, so use that for the compatible
string.  The actual flash chip model will be auto-detected at runtime
anyway.

Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
---
 arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
index 8fa79a1d1d2d..04e59b8381cb 100644
--- a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
+++ b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
@@ -13,6 +13,7 @@ / {
 	aliases {
 		mmc0 = &mmc0;
 		serial0 = &uart0;
+		spi0 = &spi0;
 	};
 
 	chosen {
@@ -35,6 +36,20 @@ &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 };
 
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pe_pins>;
-- 
2.25.1




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux