[PATCH v3 0/3] Tegra QUAD SPI combined sequence mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add ACPI support for Tegra210 QUAD SPI driver
Support new Tegra194 feature, combined sequence mode.
Add Tegra234 bindings.

v3 changes:
- document runtime pm disabled in ACPI
- clear cmb register for non combined sequence
- fixes for errors reported by kernel test robot
- skip approved patches
v2 changes:
- use combined sequence mode as default
- remove property to switch transfer modes
- fix compilation warnings

Ashish Singhal (1):
  arm64: tegra: Add QSPI controllers on Tegra234

Krishna Yarlagadda (2):
  spi: tegra210-quad: add acpi support
  spi: tegra210-quad: combined sequence mode

 .../boot/dts/nvidia/tegra234-p3701-0000.dtsi  |  12 +
 arch/arm64/boot/dts/nvidia/tegra234.dtsi      |  28 ++
 drivers/spi/spi-tegra210-quad.c               | 290 +++++++++++++++++-
 include/dt-bindings/clock/tegra234-clock.h    |   8 +
 include/dt-bindings/reset/tegra234-reset.h    |   2 +
 5 files changed, 324 insertions(+), 16 deletions(-)

-- 
2.17.1




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux