Re: [RFC/PATCHv2 2/3] dt-binding: spi: spi-dw: Select 16b or 32b access for Designware SPI

[Andy Shevchenko <andy.shevchenko@xxxxxxxxx>]

On Sat, Mar 7, 2015 at 1:46 AM,  <tthayer@xxxxxxxxxxxxxxxxxxxxx> wrote:
> From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
>
> Altera's Arria10 architecture requires a 32bit write accesses for
> APB peripherals. The current spi-dw driver uses 16bit accesses in
> some locations. This patch updated the bindings with an optional
> field in the devicetree to select 32bit accesses.
>

One comment below.

> Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/spi/spi-dw.txt |    1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/spi/spi-dw.txt b/Documentation/devicetree/bindings/spi/spi-dw.txt
> index 7b63ed6..034dbdd 100644
> --- a/Documentation/devicetree/bindings/spi/spi-dw.txt
> +++ b/Documentation/devicetree/bindings/spi/spi-dw.txt
> @@ -11,6 +11,7 @@ Required properties:
>
>  Optional properties:
>  - cs-gpios: see spi-bus.txt
> +- 32bit_access : use 32 bit register accesses
>

The most big issue for my opinion with DT is an absence of the
standard for naming properties.

So, why underscore? May be it's a time to append a generic description
of this field to Documentation/devicetree/…


-- 
With Best Regards,
Andy Shevchenko
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html