Glen,
That is not what I mean.
What happens if you run the command without setting the baud rate at all?
On Sun, 9 Jul 2023, K0LNY wrote:
> Hi Karen,
> I got the command I sent out to the list from on-line searches.
> I have just tried the 9600, and I get the same thing.
> The baud rate now is 38000.
> I have tried different things, and I just get errors.
>
> Glenn
> ----- Original Message ----- From: "Karen Lewellen"
> <klewellen@xxxxxxxxxxxxxx>
> To: "K0LNY" <glenn@ervin.email>
> Cc: <speakup@xxxxxxxxxxxxxxxxx>; "Jason White" <jason@xxxxxxxxxxxx>
> Sent: Sunday, July 9, 2023 9:16 PM
> Subject: Re: configuring a USB/Serial port
>
>
> > Glen,
> > Why not do this one at a time?
> > Why are you setting the 9600 speed for example?
> > and, if you run the STTY command what are you confirming as the tty
> > settings?
> > Clearly if the error says unable to run all of the options, one of
> > them
> > may be the problem?
> > As expressed, I simply ran a search with your question.
> > speaking personally, very much so, I avoid this by getting hardware
> > with
> > actual serial and USB ports saves the mayhem lol.
> > Kare
> >
> >
> > On Sun, 9 Jul 2023, K0LNY wrote:
> >
> > > Unfortunately, the below command does not work with or without the
> > > usb, using #0 or 1.
> > > stty -F /dev/tty0 9600 +cs8 -cstopb -parenb
> > > I still get the error
> > > unable to perform all of the requested operations.
> > > I have also tried it with less in the command with the same error,
> > > e.g.
> > > stty -F /dev/tty0 9600
> > >
> > > Glenn
> > > ----- Original Message ----- From: "Karen Lewellen"
> > > <klewellen@xxxxxxxxxxxxxx>
> > > To: "K0LNY" <glenn@ervin.email>
> > > Cc: <speakup@xxxxxxxxxxxxxxxxx>; "Jason White" <jason@xxxxxxxxxxxx>
> > > Sent: Sunday, July 9, 2023 7:03 PM
> > > Subject: Re: configuring a USB/Serial port
> > >
> > >
> > > > Hi,
> > > > A quick search of the question,
> > > > how to set a serial port in command line Linux?
> > > > Yielded the suggestion of tty0 or ttyusb0.
> > > > Also that running stty should show you what the settings are
> > > > currently.
> > > >
> > > >
> > > > On Sun, 9 Jul 2023, K0LNY wrote:
> > > >
> > > > > Yes, I should have added, I did lsusb, and the futuretk is on
> > > > > usb2, but I tried that command I sent with /dev/usb2 and it gave
> > > > > an invalid device or something like that.
> > > > > Glenn
> > > > > ----- Original Message -----
> > > > > From: Jason White
> > > > > To: speakup@xxxxxxxxxxxxxxxxx
> > > > > Sent: Sunday, July 9, 2023 6:45 PM
> > > > > Subject: Re: configuring a USB/Serial port
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > On 9/7/23 19:13, K0LNY wrote:
> > > > >
> > > > > I am trying to be able to send anything to the Dectalk
> > > > > express.
> > > > > I have tried configuring the port with the below command,
> > > > > and I get the error
> > > > > unable to perform all requested actions
> > > > > I really don't know what I'm doing, so any advice would be
> > > > > appreciated.
> > > > > Here's what I'm entering:
> > > > > stty -F /dev/tty4 9600 cs8 -cstopb -parenb
> > > > > Check your kernel logs to obtain the name of the device
> > > > > representing the serial port. It's probably /dev/ttyS0 or
> > > > > /dev/ttyusb0 or similar. /dev/tty4 is not it, I'm fairly sure.
> > > > >
> > >
> > >
> >
>
>
>
